On Sat, 2020-03-07 at 14:54 +0000, Jonathan Cameron wrote: > [External] > > On Fri, 6 Mar 2020 13:00:57 +0200 > Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote: > > > From: Michael Hennerich <michael.hennerich@xxxxxxxxxx> > > > > This change adds support for the Analog Devices Generic AXI ADC IP core. > > The IP core is used for interfacing with analog-to-digital (ADC) converters > > that require either a high-speed serial interface (JESD204B/C) or a source > > synchronous parallel interface (LVDS/CMOS). > > > > Usually, some other interface type (i.e SPI) is used as a control interface > > for the actual ADC, while the IP core (controlled via this driver), will > > interface to the data-lines of the ADC and handle the streaming of data > > into memory via DMA. > > > > Because of this, the AXI ADC driver needs the other SPI-ADC driver to > > register with it. The SPI-ADC needs to be register via the SPI framework, > > while the AXI ADC registers as a platform driver. The two cannot be ordered > > in a hierarchy as both drivers have their own registers, and trying to > > organize this [in a hierarchy becomes] problematic when trying to map > > memory/registers. > > > > There are some modes where the AXI ADC can operate as standalone ADC, but > > those will be implemented at a later point in time. > > > > Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip > > > > Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> > > Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx> > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> > Mostly looks fine, but a few nitpicks from rereading it. > > Thanks, > > Jonathan > > > --- > > drivers/iio/adc/Kconfig | 20 + > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/adi-axi-adc.c | 618 ++++++++++++++++++++++++++++ > > include/linux/iio/adc/adi-axi-adc.h | 63 +++ > > 4 files changed, 702 insertions(+) > > create mode 100644 drivers/iio/adc/adi-axi-adc.c > > create mode 100644 include/linux/iio/adc/adi-axi-adc.h > > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > index f4da821c4022..445070abf376 100644 > > --- a/drivers/iio/adc/Kconfig > > +++ b/drivers/iio/adc/Kconfig > > @@ -246,6 +246,26 @@ config AD799X > > To compile this driver as a module, choose M here: the module will be > > called ad799x. > > > > +config ADI_AXI_ADC > > + tristate "Analog Devices Generic AXI ADC IP core driver" > > + select IIO_BUFFER > > + select IIO_BUFFER_HW_CONSUMER > > + select IIO_BUFFER_DMAENGINE > > + help > > + Say yes here to build support for Analog Devices Generic > > + AXI ADC IP core. The IP core is used for interfacing with > > + analog-to-digital (ADC) converters that require either a high-speed > > + serial interface (JESD204B/C) or a source synchronous parallel > > + interface (LVDS/CMOS). > > + Typically (for such devices) SPI will be used for configuration only, > > + while this IP core handles the streaming of data into memory via DMA. > > + > > + Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip > > + If unsure, say N (but it's safe to say "Y"). > > + > > + To compile this driver as a module, choose M here: the > > + module will be called adi-axi-adc. > > + > > config ASPEED_ADC > > tristate "Aspeed ADC" > > depends on ARCH_ASPEED || COMPILE_TEST > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > > index 8462455b4228..7c6594d049f9 100644 > > --- a/drivers/iio/adc/Makefile > > +++ b/drivers/iio/adc/Makefile > > @@ -26,6 +26,7 @@ obj-$(CONFIG_AD7793) += ad7793.o > > obj-$(CONFIG_AD7887) += ad7887.o > > obj-$(CONFIG_AD7949) += ad7949.o > > obj-$(CONFIG_AD799X) += ad799x.o > > +obj-$(CONFIG_ADI_AXI_ADC) += adi-axi-adc.o > > obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o > > obj-$(CONFIG_AT91_ADC) += at91_adc.o > > obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o > > diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c > > new file mode 100644 > > index 000000000000..17ee20015d71 > > --- /dev/null > > +++ b/drivers/iio/adc/adi-axi-adc.c > > @@ -0,0 +1,618 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Analog Devices Generic AXI ADC IP core > > + * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip > > + * > > + * Copyright 2012-2020 Analog Devices Inc. > > + */ > > + > > +#include <linux/bitfield.h> > > +#include <linux/clk.h> > > +#include <linux/io.h> > > +#include <linux/delay.h> > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > +#include <linux/slab.h> > > + > > +#include <linux/iio/iio.h> > > +#include <linux/iio/sysfs.h> > > +#include <linux/iio/buffer.h> > > +#include <linux/iio/buffer-dmaengine.h> > > + > > +#include <linux/fpga/adi-axi-common.h> > > +#include <linux/iio/adc/adi-axi-adc.h> > > + > > +/** > > + * Register definitions: > > + * https://wiki.analog.com/resources/fpga/docs/axi_adc_ip#register_map > > + */ > > + > > +#define LOWER5_MSK GENMASK(4, 0) > > +#define LOWER5_SET(x) FIELD_PREP(LOWER5_MSK, x) > > +#define LOWER5_GET(x) FIELD_GET(LOWER5_MSK, x) > > Whilst it may cause more repetition, I'd rather just see these used where > relevant inline. That will be slightly easier to review. ack i wasn't too decided on whether these need to be defined yet > > > + > > +#define LOWER8_MSK GENMASK(7, 0) > > +#define LOWER8_SET(x) FIELD_PREP(LOWER8_MSK, x) > > +#define LOWER8_GET(x) FIELD_GET(LOWER8_MSK, x) > > + > > +#define UPPER16_MSK GENMASK(31, 16) > > +#define UPPER16_SET(x) FIELD_PREP(UPPER16_MSK, x) > > +#define UPPER16_GET(x) FIELD_GET(UPPER16_MSK, x) > > + > > +#define LOWER16_MSK GENMASK(15, 0) > > +#define LOWER16_SET(x) FIELD_PREP(LOWER16_MSK, x) > > +#define LOWER16_GET(x) FIELD_GET(LOWER16_MSK, x) > > + > > +/* ADC controls */ > > + > > +#define REG_RSTN 0x0040 > > Usual stuff: These should be prefixed with driver relevant prefix > maybe ADI_AXI_ my only concern [about the prefix] is that it makes the macro-names too long; after re-looking at these reg definitions, what bothered me is that some of the bit-field-names collide; so i went with concatenanting reg-names + reg-bitnames, which made them look too long [so i removed the prefix] there's also the possibility of going back to the regmap-doc and shortening these reg-name/bitnames; but they've been like this for a while, and i admit going to the HDL team makes me sometimes lazy; i'll re-add teh ADI_AXI prefix; and will see how these look > > > +#define REG_RSTN_CE_N BIT(2) > > +#define REG_RSTN_MMCM_RSTN BIT(1) > > +#define REG_RSTN_RSTN BIT(0) > > + > > +#define REG_CNTRL 0x0044 > > +#define REG_CNTRL_SYNC BIT(3) > > +#define REG_CNTRL_R1_MODE BIT(2) > > +#define REG_CNTRL_DDR_EDGESEL BIT(1) > > +#define REG_CNTRL_PIN_MODE BIT(0) > > + > > +#define REG_CLK_FREQ 0x0054 > > +#define REG_CLK_RATIO 0x0058 > > + > > +#define REG_STATUS 0x005C > > +#define REG_STATUS_PN_ERR BIT(3) > > +#define REG_STATUS_PN_OOS BIT(2) > > +#define REG_STATUS_OVER_RANGE BIT(1) > > +#define REG_STATUS_STATUS BIT(0) > > + > > +#define REG_SYNC_STATUS 0x0068 > > +#define REG_SYNC_STATUS_SYNC BIT(0) > > + > > +#define REG_DRP_CNTRL 0x0070 > > +#define REG_DRP_CNTRL_DRP_RWN BIT(28) > > +#define REG_DRP_CNTRL_DRP_ADDRESS_MSK GENMASK(27, 16) > > +#define REG_DRP_CNTRL_DRP_ADDRESS_SET(x) \ > > + FIELD_PREP(REG_DRP_CNTRL_DRP_ADDRESS_MSK, x) > > +#define REG_DRP_CNTRL_DRP_ADDRESS_GET(x) \ > > + FIELD_GET(REG_DRP_CNTRL_DRP_ADDRESS_MSK, x) > > + > > +#define REG_DRP_STATUS 0x0074 > > +#define REG_DRP_STATUS_DRP_LOCKED BIT(17) > > +#define REG_DRP_STATUS_DRP_STATUS BIT(16) > > + > > +#define REG_DRP_WDATA 0x0078 > > +#define REG_DRP_WDATA_SET LOWER16_SET > > +#define REG_DRP_WDATA_GET LOWER16_GET > > As mentioned above, I'd rather see the mask here. Unless used > an awful lot, I'd rather just see the FIELD_PREP and FIELD_GET > used inline rather than defining a bunch of _SET/_GET only some > of which seem to be used so far. > sure; will remove all these _SET/_GET shorthands a lot of them will be used; and we may implement all reg-definitions at some point; this driver is a re-write/adaptation of this one: https://github.com/analogdevicesinc/linux/blob/master/drivers/iio/adc/cf_axi_adc_core.c which has grown quite a lot and trying to clean it up is... ¯\_(ツ)_/¯ > > + > > +#define REG_DRP_RDATA 0x007C > > +#define REG_DRP_RDATA_SET LOWER16_SET > > +#define REG_DRP_RDATA_GET LOWER16_GET > > + > > +#define REG_UI_STATUS 0x0088 > > +#define REG_UI_STATUS_OVF BIT(2) > > +#define REG_UI_STATUS_UNF BIT(1) > > + > > +#define REG_USR_CNTRL_1 0x00A0 > > +#define REG_USR_CNTRL_1_USR_CHANMAX_MSK LOWER8_MSK > > +#define REG_USR_CNTRL_1_USR_CHANMAX_SET LOWER8_SET > > +#define REG_USR_CNTRL_1_USR_CHANMAX_GET LOWER8_GET > > + > > +#define REG_ADC_START_CODE 0x00A4 > > +#define REG_ADC_GPIO_IN 0x00B8 > > +#define REG_ADC_GPIO_OUT 0x00BC > > + > > +#define REG_PPS_COUNTER 0x00C0 > > + > > +#define REG_PPS_STATUS 0x00C4 > > +#define REG_PPS_STATUS_PPS_STATUS BIT(0) > > + > > +/* ADC Channel controls */ > > + > > +#define REG_CHAN_CNTRL(c) (0x0400 + (c) * 0x40) > > +#define REG_CHAN_CNTRL_LB_OWR BIT(11) > > +#define REG_CHAN_CNTRL_PN_SEL_OWR BIT(10) > > +#define REG_CHAN_CNTRL_IQCOR_ENB BIT(9) > > +#define REG_CHAN_CNTRL_DCFILT_ENB BIT(8) > > +#define REG_CHAN_CNTRL_FORMAT_SIGNEXT BIT(6) > > +#define REG_CHAN_CNTRL_FORMAT_TYPE BIT(5) > > +#define REG_CHAN_CNTRL_FORMAT_ENABLE BIT(4) > > +#define REG_CHAN_CNTRL_ADC_PN_TYPE_OWR BIT(1) > > +#define REG_CHAN_CNTRL_ENABLE BIT(0) > > + > > +#define REG_CHAN_CNTRL_DEFAULTS \ > > + (REG_CHAN_CNTRL_FORMAT_SIGNEXT | REG_CHAN_CNTRL_FORMAT_ENABLE | \ > > + REG_CHAN_CNTRL_IQCOR_ENB | REG_CHAN_CNTRL_ENABLE) > > + > > +#define REG_CHAN_STATUS(c) (0x0404 + (c) * 0x40) > > +#define REG_CHAN_STATUS_PN_ERR BIT(2) > > +#define REG_CHAN_STATUS_PN_OOS BIT(1) > > +#define REG_CHAN_STATUS_OVER_RANGE BIT(0) > > + > > +#define REG_CHAN_CNTRL_1(c) (0x0410 + (c) * 0x40) > > +#define REG_CHAN_CNTRL_1_DCFILT_OFFSET_MSK UPPER16_MSK > > +#define REG_CHAN_CNTRL_1_DCFILT_OFFSET_SET UPPER16_SET > > +#define REG_CHAN_CNTRL_1_DCFILT_OFFSET_GET UPPER16_GET > > +#define REG_CHAN_CNTRL_1_DCFILT_COEFF_MSK LOWER16_MSK > > +#define REG_CHAN_CNTRL_1_DCFILT_COEFF_SET LOWER16_SET > > +#define REG_CHAN_CNTRL_1_DCFILT_COEFF_GET LOWER16_GET > > + > > +#define REG_CHAN_CNTRL_2(c) (0x0414 + (c) * 0x40) > > +#define REG_CHAN_CNTRL_2_IQCOR_COEFF_1_MSK UPPER16_MSK > > +#define REG_CHAN_CNTRL_2_IQCOR_COEFF_1_SET UPPER16_SET > > +#define REG_CHAN_CNTRL_2_IQCOR_COEFF_1_GET UPPER16_GET > > +#define REG_CHAN_CNTRL_2_IQCOR_COEFF_2_MSK LOWER16_MSK > > +#define REG_CHAN_CNTRL_2_IQCOR_COEFF_2_SET LOWER16_SET > > +#define REG_CHAN_CNTRL_2_IQCOR_COEFF_2_GET LOWER16_GET > > + > > +/* format is 1.1.14 (sign, integer and fractional bits) */ > > +#define IQCOR_INT_1 0x4000UL > > +#define IQCOR_SIGN_BIT BIT(15) > > + > > +#define REG_CHAN_CNTRL_3(c) (0x0418 + (c) * 0x40) > > +#define REG_CHAN_CNTRL_3_ADC_PN_SEL_MSK UPPER16_MSK > > +#define REG_CHAN_CNTRL_3_ADC_PN_SEL_SET UPPER16_SET > > +#define REG_CHAN_CNTRL_3_ADC_PN_SEL_GET UPPER16_GET > > +#define REG_CHAN_CNTRL_3_ADC_DATA_SEL_MSK LOWER16_MSK > > +#define REG_CHAN_CNTRL_3_ADC_DATA_SEL_SET LOWER16_SET > > +#define REG_CHAN_CNTRL_3_ADC_DATA_SEL_GET LOWER16_GET > > + > > +#define REG_CHAN_USR_CNTRL_1(c) (0x0420 > > + (c) * 0x40) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_BE BIT(25) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_SIGNED BIT(24) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_SHIFT_MSK GENMASK( > > 23, 16) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_SHIFT_SET(x) \ > > + FIELD_PREP(REG_CHAN_USR_CNTRL_1_USR_DATATYPE_SHIFT_MSK, x) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_SHIFT_GET \ > > + FIELD_GET(REG_CHAN_USR_CNTRL_1_USR_DATATYPE_SHIFT_MSK, x) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_TOTAL_BITS_MSK GENMASK(15, 8) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_TOTAL_BITS_SET(x) \ > > + FIELD_PREP(REG_CHAN_USR_CNTRL_1_USR_DATATYPE_TOTAL_BITS_MSK, x) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_TOTAL_BITS_GET(x) \ > > + FIELD_GET(REG_CHAN_USR_CNTRL_1_USR_DATATYPE_TOTAL_BITS_MSK, x) > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_BITS_MSK LOWER8_M > > SK > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_BITS_SET LOWER8_S > > ET > > +#define REG_CHAN_USR_CNTRL_1_USR_DATATYPE_BITS_GET LOWER8_G > > ET > > + > > +#define REG_CHAN_USR_CNTRL_2(c) (0x0424 + (c) * > > 0x40) > > +#define REG_CHAN_USR_CNTRL_2_USR_DECIMATION_M_MSK UPPER16_MSK > > +#define REG_CHAN_USR_CNTRL_2_USR_DECIMATION_M_SET UPPER16_SET > > +#define REG_CHAN_USR_CNTRL_2_USR_DECIMATION_M_GET UPPER16_GET > > +#define REG_CHAN_USR_CNTRL_2_USR_DECIMATION_N_MSK LOWER16_MSK > > +#define REG_CHAN_USR_CNTRL_2_USR_DECIMATION_N_SET LOWER16_SET > > +#define REG_CHAN_USR_CNTRL_2_USR_DECIMATION_N_GET LOWER16_GET > > + > > +/* IO Delay controls */ > > +#define __REG_DELAY_CONTROL(base, lane) ((base) + ((lane) * > > 0x04)) > > + > > +#define REG_DELAY_CONTROL(lane) \ > > + __REG_DELAY_CONTROL(0x0800, lane) > > +#define REG_DELAY_CONTROL_MSK LOWER5_MSK > > +#define REG_DELAY_CONTROL_SET LOWER5_SET > > +#define REG_DELAY_CONTROL_GET LOWER5_GET > > + > > +struct adi_axi_adc_core_info { > > + unsigned int version; > > +}; > > + > > +struct adi_axi_adc_state { > > + struct mutex lock; > > + > > + struct adi_axi_adc_client *client; > > + void __iomem *regs; > > +}; > > + > > +struct adi_axi_adc_client { > > + struct list_head entry; > > + struct adi_axi_adc_conv conv; > > + struct adi_axi_adc_state *state; > > + struct device *dev; > > + const struct adi_axi_adc_core_info *info; > > +}; > > + > > +static LIST_HEAD(registered_clients); > > +static DEFINE_MUTEX(registered_clients_lock); > > + > > +static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv > > *conv) > > +{ > > + if (!conv) > > + return NULL; > > + return container_of(conv, struct adi_axi_adc_client, conv); > > +} > > + > > +void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv) > > +{ > > + struct adi_axi_adc_client *cl = conv_to_client(conv); > > + > > + if (!cl) > > + return NULL; > > + > > + return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), IIO_ALIGN); > > +} > > +EXPORT_SYMBOL_GPL(adi_axi_adc_conv_priv); > > + > > +static void adi_axi_adc_write(struct adi_axi_adc_state *st, > > + unsigned int reg, > > + unsigned int val) > > +{ > > + iowrite32(val, st->regs + reg); > > +} > > + > > +static unsigned int adi_axi_adc_read(struct adi_axi_adc_state *st, > > + unsigned int reg) > > +{ > > + return ioread32(st->regs + reg); > > +} > > + > > +static int adi_axi_adc_config_dma_buffer(struct device *dev, > > + struct iio_dev *indio_dev) > > +{ > > + struct iio_buffer *buffer; > > + const char *dma_name; > > + > > + if (!device_property_present(dev, "dmas")) > > + return 0; > > + > > + if (device_property_read_string(dev, "dma-names", &dma_name)) > > + dma_name = "rx"; > > + > > + buffer = devm_iio_dmaengine_buffer_alloc(indio_dev->dev.parent, > > + dma_name); > > + if (IS_ERR(buffer)) > > + return PTR_ERR(buffer); > > + > > + indio_dev->modes |= INDIO_BUFFER_HARDWARE; > > + iio_device_attach_buffer(indio_dev, buffer); > > + > > + return 0; > > +} > > + > > +static int adi_axi_adc_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct adi_axi_adc_state *st = iio_priv(indio_dev); > > + struct adi_axi_adc_conv *conv = &st->client->conv; > > + > > + if (!conv->read_raw) > > + return -EOPNOTSUPP; > > + > > + return conv->read_raw(conv, chan, val, val2, mask); > > +} > > + > > +static int adi_axi_adc_write_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int val, int val2, long mask) > > +{ > > + struct adi_axi_adc_state *st = iio_priv(indio_dev); > > + struct adi_axi_adc_conv *conv = &st->client->conv; > > + > > + if (!conv->write_raw) > > + return -EOPNOTSUPP; > > + > > + return conv->write_raw(conv, chan, val, val2, mask); > > +} > > + > > +static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev, > > + const unsigned long *scan_mask) > > +{ > > + struct adi_axi_adc_state *st = iio_priv(indio_dev); > > + struct adi_axi_adc_conv *conv = &st->client->conv; > > + unsigned int i, ctrl; > > + > > + for (i = 0; i < conv->chip_info->num_channels; i++) { > > + ctrl = adi_axi_adc_read(st, REG_CHAN_CNTRL(i)); > > + > > + if (test_bit(i, scan_mask)) > > + ctrl |= REG_CHAN_CNTRL_ENABLE; > > + else > > + ctrl &= ~REG_CHAN_CNTRL_ENABLE; > > + > > + adi_axi_adc_write(st, REG_CHAN_CNTRL(i), ctrl); > > + } > > + > > + return 0; > > +} > > + > > +static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device > > *dev, > > + int sizeof_priv) > > +{ > > + struct adi_axi_adc_client *cl; > > + size_t alloc_size; > > + > > + alloc_size = sizeof(struct adi_axi_adc_client); > > + if (sizeof_priv) { > > + alloc_size = ALIGN(alloc_size, IIO_ALIGN); > > + alloc_size += sizeof_priv; > > + } > > + alloc_size += IIO_ALIGN - 1; > > + > > + cl = kzalloc(alloc_size, GFP_KERNEL); > > + if (!cl) > > + return ERR_PTR(-ENOMEM); > > + > > + mutex_lock(®istered_clients_lock); > > + > > + get_device(dev); > > + cl->dev = dev; > > + > > + list_add_tail(&cl->entry, ®istered_clients); > > + > > + mutex_unlock(®istered_clients_lock); > > + > > + return &cl->conv; > > +} > > + > > +static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv) > > +{ > > + struct adi_axi_adc_client *cl = conv_to_client(conv); > > + > > + if (!cl) > > + return; > > + > > + mutex_lock(®istered_clients_lock); > > + > > + put_device(cl->dev); > > + list_del(&cl->entry); > This isn't reverse of register. Why? > Should be list_del then put_device. > > > + kfree(cl); > > To reverse the register precisely the kfree(cl) should be outside > the lock... yeah; i was a bit careless/relaxed when writing this bit of code; will update; > > > + > > + mutex_unlock(®istered_clients_lock); > > +} > > + > > +static void devm_adi_axi_adc_conv_release(struct device *dev, void *res) > > +{ > > + adi_axi_adc_conv_unregister(*(struct adi_axi_adc_conv **)res); > > +} > > + > > +struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, > > + int sizeof_priv) > > +{ > > + struct adi_axi_adc_conv **ptr, *conv; > > + > > + ptr = devres_alloc(devm_adi_axi_adc_conv_release, sizeof(*ptr), > > + GFP_KERNEL); > > + if (!ptr) > > + return ERR_PTR(-ENOMEM); > > + > > + conv = adi_axi_adc_conv_register(dev, sizeof_priv); > > + if (IS_ERR(conv)) { > > + devres_free(ptr); > > + return ERR_CAST(conv); > > + } > > + > > + *ptr = conv; > > + devres_add(dev, ptr); > > + > > + return conv; > > +} > > +EXPORT_SYMBOL_GPL(devm_adi_axi_adc_conv_register); > > + > > +static ssize_t in_voltage_scale_available_show(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > + struct adi_axi_adc_state *st = iio_priv(indio_dev); > > + struct adi_axi_adc_conv *conv = &st->client->conv; > > + size_t len = 0; > > + int i; > > + > > + if (!conv->chip_info->num_scales) { > > + buf[0] = '\n'; > > + return 1; > > I'd prefer to see this done using the core available handling. > That way drivers that don't provide this would just not register > it in the first place. It will be a characteristic of the channels. ack will take a look closer here; i am a bit vague [at this point] on how to do it; but i'll figure it out > > > + } > > + > > + for (i = 0; i < conv->chip_info->num_scales; i++) { > > + const unsigned int *s = conv->chip_info->scale_table[i]; > > + > > + len += scnprintf(buf + len, PAGE_SIZE - len, > > + "%u.%06u ", s[0], s[1]); > > + } > > + buf[len - 1] = '\n'; > > + > > + return len; > > +} > > + > > +static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); > > + > > +static struct attribute *adi_axi_adc_attributes[] = { > > + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, > > + NULL, > > +}; > > + > > +static const struct attribute_group adi_axi_adc_attribute_group = { > > + .attrs = adi_axi_adc_attributes, > > +}; > > + > > +static const struct iio_info adi_axi_adc_info = { > > + .read_raw = &adi_axi_adc_read_raw, > > + .write_raw = &adi_axi_adc_write_raw, > > + .attrs = &adi_axi_adc_attribute_group, > > + .update_scan_mode = &adi_axi_adc_update_scan_mode, > > +}; > > + > > +static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = { > > + .version = ADI_AXI_PCORE_VER(10, 0, 'a'), > > +}; > > + > > +/* Match table for of_platform binding */ > > +static const struct of_device_id adi_axi_adc_of_match[] = { > > + { .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info > > }, > > + { /* end of list */ }, > > +}; > > +MODULE_DEVICE_TABLE(of, adi_axi_adc_of_match); > > + > > +struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev) > > +{ > > + const struct of_device_id *id; > > + struct adi_axi_adc_client *cl; > > + struct device_node *cln; > > + > > + if (!dev->of_node) { > > + dev_err(dev, "DT node is null\n"); > > + return ERR_PTR(-ENODEV); > > + } > > + > > + id = of_match_node(adi_axi_adc_of_match, dev->of_node); > > + if (!id) > > + return ERR_PTR(-ENODEV); > > + > > + cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0); > > + if (!cln) { > > + dev_err(dev, "No 'adi,adc-dev' node defined\n"); > > + return ERR_PTR(-ENODEV); > > + } > > + > > + mutex_lock(®istered_clients_lock); > > + > > + list_for_each_entry(cl, ®istered_clients, entry) { > > + if (!cl->dev) > > + continue; > > + if (cl->dev->of_node == cln) { > > + if (!try_module_get(dev->driver->owner)) { > > + mutex_unlock(®istered_clients_lock); > > + return ERR_PTR(-ENODEV); > > + } > > + get_device(dev); > > + cl->info = id->data; > > + mutex_unlock(®istered_clients_lock); > > + return cl; > > + } > > + } > > + > > + mutex_unlock(®istered_clients_lock); > > + > > + return ERR_PTR(-EPROBE_DEFER); > > +} > > + > > +static int adi_axi_adc_setup_channels(struct device *dev, > > + struct adi_axi_adc_state *st) > > +{ > > + struct adi_axi_adc_conv *conv = conv = &st->client->conv; > > + unsigned int val; > > + int i, ret; > > + > > + if (conv->preenable_setup) { > > + ret = conv->preenable_setup(conv); > > + if (ret) > > + return ret; > > + } > > + > > + for (i = 0; i < conv->chip_info->num_channels; i++) { > > + if (i & 1) > > + val = REG_CHAN_CNTRL_2_IQCOR_COEFF_2_SET(IQCOR_INT_1); > > + else > > + val = REG_CHAN_CNTRL_2_IQCOR_COEFF_1_SET(IQCOR_INT_1); > > + adi_axi_adc_write(st, REG_CHAN_CNTRL_2(i), val); > > + > > + adi_axi_adc_write(st, REG_CHAN_CNTRL(i), > > + REG_CHAN_CNTRL_DEFAULTS); > > + } > > + > > + return 0; > > +} > > + > > +static void axi_adc_reset(struct adi_axi_adc_state *st) > > +{ > > + adi_axi_adc_write(st, REG_RSTN, 0); > > + mdelay(10); > > + adi_axi_adc_write(st, REG_RSTN, REG_RSTN_MMCM_RSTN); > > + mdelay(10); > > + adi_axi_adc_write(st, REG_RSTN, > > + REG_RSTN_RSTN | REG_RSTN_MMCM_RSTN); > > +} > > + > > +static void adi_axi_adc_cleanup(void *data) > > +{ > > + struct adi_axi_adc_client *cl = data; > > + > > + put_device(cl->dev); > > + module_put(cl->dev->driver->owner); > > +} > > + > > +static int adi_axi_adc_probe(struct platform_device *pdev) > > +{ > > + struct adi_axi_adc_conv *conv; > > + struct iio_dev *indio_dev; > > + struct adi_axi_adc_client *cl; > > + struct adi_axi_adc_state *st; > > + unsigned int ver; > > + int ret; > > + > > + cl = adi_axi_adc_attach_client(&pdev->dev); > > + if (IS_ERR(cl)) > > + return PTR_ERR(cl); > > + > > + ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl); > > + if (ret) > > + return ret; > > + > > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); > > + if (indio_dev == NULL) > > + return -ENOMEM; > > + > > + st = iio_priv(indio_dev); > > + st->client = cl; > > + cl->state = st; > > + mutex_init(&st->lock); > > + > > + st->regs = devm_platform_ioremap_resource(pdev, 0); > > + if (IS_ERR(st->regs)) > > + return PTR_ERR(st->regs); > > + > > + conv = &st->client->conv; > > + > > + axi_adc_reset(st); > > + > > + ver = adi_axi_adc_read(st, ADI_AXI_REG_VERSION); > > + > > + if (cl->info->version > ver) { > > + dev_err(&pdev->dev, > > + "IP core version is too old. Expected %d.%.2d.%c, > > Reported %d.%.2d.%c\n", > > + ADI_AXI_PCORE_VER_MAJOR(cl->info->version), > > + ADI_AXI_PCORE_VER_MINOR(cl->info->version), > > + ADI_AXI_PCORE_VER_PATCH(cl->info->version), > > + ADI_AXI_PCORE_VER_MAJOR(ver), > > + ADI_AXI_PCORE_VER_MINOR(ver), > > + ADI_AXI_PCORE_VER_PATCH(ver)); > > + return -ENODEV; > > + } > > + > > + indio_dev->info = &adi_axi_adc_info; > > + indio_dev->dev.parent = &pdev->dev; > > + indio_dev->name = dev_name(&pdev->dev); > > What does this result in? Given this is supposed to be a part number > I kind of expected this to be hardcoded to "adi-axi-adc" or similar. ack; "adi-axi-adc" it is > > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->num_channels = conv->chip_info->num_channels; > > + indio_dev->channels = conv->chip_info->channels; > > + > > + ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev); > > + if (ret) > > + return ret; > > + > > + ret = adi_axi_adc_setup_channels(&pdev->dev, st); > > + if (ret) > > + return ret; > > + > > + ret = devm_iio_device_register(&pdev->dev, indio_dev); > > + if (ret) > > + return ret; > > + > > + dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%c) probed\n", > > + ADI_AXI_PCORE_VER_MAJOR(ver), > > + ADI_AXI_PCORE_VER_MINOR(ver), > > + ADI_AXI_PCORE_VER_PATCH(ver)); > > + > > + return 0; > > +} > > + > > +static struct platform_driver adi_axi_adc_driver = { > > + .driver = { > > + .name = KBUILD_MODNAME, > > + .of_match_table = adi_axi_adc_of_match, > > + }, > > + .probe = adi_axi_adc_probe, > > +}; > > +module_platform_driver(adi_axi_adc_driver); > > + > > +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>"); > > +MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/include/linux/iio/adc/adi-axi-adc.h > > b/include/linux/iio/adc/adi-axi-adc.h > > new file mode 100644 > > index 000000000000..57974944b30b > > --- /dev/null > > +++ b/include/linux/iio/adc/adi-axi-adc.h > > @@ -0,0 +1,63 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Analog Devices Generic AXI ADC IP core driver/library > > + * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip > > + * > > + * Copyright 2012-2020 Analog Devices Inc. > > + */ > > +#ifndef __ADI_AXI_ADC_H__ > > +#define __ADI_AXI_ADC_H__ > > + > > +struct device; > > +struct iio_chan_spec; > > + > > +/** > > + * struct adi_axi_adc_chip_info - Chip specific information > > + * @name Chip name > > + * @id Chip ID (usually product ID) > > + * @channels Channel specifications of type @struct > > axi_adc_chan_spec > > + * @num_channels Number of @channels > > + * @scale_table Supported scales by the chip; tuples of 2 ints > > + * @num_scales Number of scales in the table > > + * @max_rate Maximum sampling rate supported by the device > > + */ > > +struct adi_axi_adc_chip_info { > > + const char *name; > > + unsigned int id; > > + > > + const struct iio_chan_spec *channels; > > + unsigned int num_channels; > > + > > + const unsigned int (*scale_table)[2]; > > + int num_scales; > > + > > + unsigned long max_rate; > > +}; > > + > > +/** > > + * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC > > + * @chip_info chip info details for the client ADC > > + * @preenable_setup op to run in the client before enabling the AXI > > ADC > > Run the kernel doc script over this and it would have moaned... > > No reg_access. ack; i'll need to start adapting that script to some CI it's on my todo-list > > > + * @read_raw IIO read_raw hook for the client ADC > > + * @write_raw IIO write_raw hook for the client ADC > > + */ > > +struct adi_axi_adc_conv { > > + const struct adi_axi_adc_chip_info *chip_info; > > + > > + int (*preenable_setup)(struct adi_axi_adc_conv *conv); > > + int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg, > > + unsigned int writeval, unsigned int *readval); > > + int (*read_raw)(struct adi_axi_adc_conv *conv, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask); > > + int (*write_raw)(struct adi_axi_adc_conv *conv, > > + struct iio_chan_spec const *chan, > > + int val, int val2, long mask); > > +}; > > + > > +struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, > > + int sizeof_priv); > > + > > +void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv); > > + > > +#endif
