Linux IIO Development

• Thread Index

• Re: [PATCH 1/2] [PATCH 1/2] iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Fix bad GENMASK use, typos, whitespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: Documentation: Remove (partially) duplicate line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: fix iio_trigger_poll issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: hid-sensor-rotation: Add relative orientation sensor hid support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: hid-sensor-rotation: Add geomagnetic orientation sensor hid support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Enabling auto-WAKE/SLEEP for mma8654 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: tsl2x7x: remove header file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: iio: adc: add Meson8 and Meson8b support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 3/3] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: iio: adc: add Meson8 and Meson8b support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] Meson8 / Meson8b support for the meson_saradc driver
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH] iio: temperature: maxim_thermocouple: add MAX31856 part
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add driver for Infineon DPS310
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: hid-sensor-rotation: Add relative orientation sensor hid support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: Add driver for Infineon DPS310
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 1/9] iio: light: rpr0521 disable sensor -bugfix
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v3 8/9] iio: light: rpr0521 channel numbers reordered
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 9/9] iio: light: rpr0521 triggered buffer
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 6/9] iio: light: rpr0521 sample_frequency read/write
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 7/9] iio: light: rpr0521 proximity offset read/write
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 5/9] iio: light: rpr0521 whitespace fixes
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 4/9] iio: light: rpr0521 magic number to sizeof() on value read
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 3/9] iio: light: rpr0521 on-off sequence change for CONFIG_PM
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/9] iio: light: rpr0521 poweroff for probe fails
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 1/9] iio: light: rpr0521 disable sensor -bugfix
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v3] iio: adc: Add support for TI ADC108S102 and ADC128S102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH 1/3] iio: hid-sensor-rotation: Add relative orientation sensor hid support
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 3/3] iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 2/3] iio: hid-sensor-rotation: Add geomagnetic orientation sensor hid support.
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 1/3] iio: hid-sensor-rotation: Add relative orientation sensor hid support
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• [PATCH 2/2] staging: iio: tsl2x7x: remove header file
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 1/2] staging: iio: tsl2x7x: rename driver for consistency with other IIO light drivers
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 0/2] staging: iio: tsl2x7x: staging cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] iio: proximity: as3935: fix iio_trigger_poll issue
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 2/2] tsl2x7x_core: use octal permission representation
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 1/2] tsl2x7x_core: remove paragraph about writing to the FSF's mailing address
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 0/9] Drop unnecessary static
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 7/9] iio: hid-sensor-accel-3d: Drop unnecessary static
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• RE: [PATCH v3 1/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: "Langer, Thomas" <thomas.langer@xxxxxxxxx>
• [PATCH v3 1/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: iio: adc: add Meson8 and Meson8b support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] Meson8 / Meson8b support for the meson_saradc driver
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: DMA support for at91-sama5d2 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCHv2 2/2] iio: adc: add driver for the ti-adc084s021 chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: DMA support for at91-sama5d2 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• DMA support for at91-sama5d2 ADC driver
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: adc: sama5d2_adc hw triggers and buffers
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: tools: generic_buffer: increase trigger length
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH] iio: Add driver for Infineon DPS310
  • From: Joel Stanley <joel@xxxxxxxxx>
• Enabling auto-WAKE/SLEEP for mma8654 accelerometer
  • From: "Schaefer, Brandon" <brandon.schaefer@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v3 0/2] add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [BUG RFC] iio: pressure: zpa2326: incorrect condition or inconsistent return handling
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [BUG RFC] iio: pressure: zpa2326: incorrect condition or inconsistent return handling
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCHv2 2/2] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Fix bad GENMASK use, typos, whitespace
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH v2] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [BUG] crash when removing sun4i_gpadc_iio module
  • From: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/2] [PATCH 1/2] iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 2/2] [PATCH 2/2] iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• RE: [PATCH -next v2] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: "weiyongjun (A)" <weiyongjun1@xxxxxxxxxx>
• [PATCH 2/2] [PATCH 2/2] iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
  • From: Eduardo Molinas <edu.molinas@xxxxxxxxx>
• [PATCH 1/2] [PATCH 1/2] iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
  • From: Eduardo Molinas <edu.molinas@xxxxxxxxx>
• Re: [PATCH -next v2] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] power: supply: avoid unused twl4030-madc.h
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] iio: adc: Fix bad GENMASK use, typos, whitespace
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 1/2] iio: Documentation: Remove (partially) duplicate line
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 0/2] iio: Trivial fixes for INA219, Documentation
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] hwmon: twl4030-madc: drop driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] hwmon: twl4030-madc: drop driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: ade7854: Convert symbolic permissions to octal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: ade7758: Convert symbolic permissions to octal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: ade7754: Convert symbolic permissions to octal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: ade7753 Convert: symbolic permissions to octal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Fix permissions warning from check-patch for tsl2x7x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: ad9834 convert symbolic permissions to octal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/5] iio: ade7854: Convert symbolic permissions to octal
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• [PATCH 4/5] iio: ade7758: Convert symbolic permissions to octal
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• [PATCH 3/5] iio: ade7754: Convert symbolic permissions to octal
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• [PATCH 2/5] iio: ade7753 Convert: symbolic permissions to octal
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• [PATCH 1/5] iio: ad9834 convert symbolic permissions to octal
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• Fix permissions warning from check-patch for tsl2x7x
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• Re: [PATCH] staging: iio: isl29028: add isl29030 support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] hwmon: twl4030-madc: drop driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_pressure: st_accel: Initialise sensor platform data properly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: st_lsm6dsx: add system power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: modify st_lsm6dsx_flush_fifo and st_lsm6dsx_set_fifo_mode scope
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] hwmon: twl4030-madc: drop driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: twl4030: Fold twl4030-madc.h into driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: twl4030: Remove twl4030_madc_request.func_cb
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: twl4030: Unexport twl4030_madc_conversion()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/7] iio: adc: twl4030: Drop twl4030_get_madc_conversion()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: adc: max9611: Fix return value check in max9611_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next v2] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: isl29028: add isl29030 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Fix check-patch symbolic permissions warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Fix check-patch symbolic permissions warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2 2/2] iio: adc: add driver for the ti-adc084s021 chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCHv2 2/2] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCHv2 1/2] dt-bindings: iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH v2 0/2] add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] iio: accel: adxl345: Add support for triggered buffer
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v2 3/4] iio: accel: adxl345: Setup DATA_READY trigger
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v2 2/4] iio: accel: adxl345_core: Introduce set_mode and data_ready functions
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: iio: accel: adxl345: Add optional interrupt-names support
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH v2 0/4] iio: accel: adxl345: Add support for buffered readings
  • From: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
• [PATCH] Fix check-patch symbolic permissions warnings
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• Fix permissions warning from check-patch for tsl2x7x
  • From: Quentin Swain <dudebrobro179@xxxxxxxxx>
• Re: [PATCH] staging: iio: isl29028: add isl29030 support
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] staging: iio: isl29028: add isl29030 support
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: st_pressure: st_accel: Initialise sensor platform data properly
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: imu: st_lsm6dsx: modify st_lsm6dsx_flush_fifo and st_lsm6dsx_set_fifo_mode scope
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v2 2/2] iio: imu: st_lsm6dsx: add system power management support
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v2 0/2] add power management support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: HID: sensor-hub: Delete error messages for failed memory allocations in sensor_hub_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:ad5064: Add support for ltc2633 and similar devices
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH 1/7] hwmon: twl4030-madc: drop driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/7] iio: adc: twl4030: Unexport twl4030_madc_conversion()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 3/7] iio: adc: twl4030: Drop twl4030_get_madc_conversion()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 6/7] iio: adc: twl4030: Remove twl4030_madc_request.func_cb
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 5/7] iio: adc: twl4030: Drop struct twl4030_madc_user_parms
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 7/7] iio: adc: twl4030: Fold twl4030-madc.h into driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 1/7] hwmon: twl4030-madc: drop driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 2/7] power: supply: avoid unused twl4030-madc.h
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH 0/7] twl4030-madc cleanup
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: fix AS3935_INT mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH -next] iio: adc: max9611: Fix return value check in max9611_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH -next v2] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH 1/2] iio: add hardware triggered operating mode
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 2/2] iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 0/2]
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH] iio:ad5064: Add support for ltc2633 and similar devices
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2] input: touchscreen: mxs-lradc: || vs && typos
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: fix AS3935_INT mask
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: fix AS3935_INT mask
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: proximity: as3935: fix AS3935_INT mask
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] iio: core: Fix suspicious sizeof usage
  • From: Orson Zhai <orson.zhai@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: move storm out of range check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mxs-lradc: Checking IS_ERR() instead of NULL
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] hwmon: Add driver for Infineon DPS310
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:ad5064: Add support for ltc2633 and similar devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] tools/iio: Use include/uapi with __EXPORTED_HEADERS__
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: Fix suspicious sizeof usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: proximity: as3935: move storm out of range check
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: tools: generic_buffer: increase trigger length
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Derive interface clock speed from fck clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] input: touchscreen: mxs-lradc: || vs && typos
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/2] input: touchscreen: mxs-lradc: Checking for ERR_PTR instead of NULL in probe
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 2/2] input: touchscreen: mxs-lradc: || vs && typos
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio: adc: mxs-lradc: Checking IS_ERR() instead of NULL
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/2] input: touchscreen: mxs-lradc: Checking for ERR_PTR instead of NULL in probe
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [RFC PATCH] hwmon: Add driver for Infineon DPS310
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH] hwmon: Add driver for Infineon DPS310
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• RE: [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: "weiyongjun (A)" <weiyongjun1@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio:ad5064: Add support for ltc2633 and similar devices
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• RE: [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: "weiyongjun (A)" <weiyongjun1@xxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: stm32 trigger: Add support for TRGO2 triggers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: export st_lsm6dsx_flush_fifo() and st_lsm6dsx_set_fifo_mode() routines
  • From: Lorenzo BIANCONI <lorenzo.bianconi@xxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: bma180: Add ACPI enumeration support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: recalibrate RCO after resume
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] staging: iio: isl29028: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: add system sleep power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: export st_lsm6dsx_flush_fifo() and st_lsm6dsx_set_fifo_mode() routines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD and IIO due for the v4.12 merge window
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] staging: iio: isl29028: move out of staging
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] iio: st_pressure: st_accel: Initialise sensor platform data properly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] staging: iio: isl29028: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] staging: iio: isl29028: correct proximity sleep times
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] staging: iio: isl29028: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: tsl2583: add runtime power management support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: tsl2x7x: Replace deprecated macros (S_IRUGO, S_IWUSR)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix a static checker error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix a static checker error
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix a static checker error
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH] staging: iio: tsl2x7x: Replace deprecated macros (S_IRUGO, S_IWUSR)
  • From: Paolo Cretaro <melko@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: tsl2583: add runtime power management support
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 7/7] HID: picoLCD: Replace two seq_printf() calls by seq_puts() in picolcd_debug_reset_show()
  • From: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH -next] iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH] iio: core: Fix suspicious sizeof usage
  • From: Orson Zhai <orson.zhai@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] staging: iio: isl29028: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 1/2] staging: iio: isl29028: correct proximity sleep times
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 0/2] staging: iio: isl29028: move out of staging
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: Fix name of BME280 part in Kconfig
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• [PATCH 7/7] HID: picoLCD: Replace two seq_printf() calls by seq_puts() in picolcd_debug_reset_show()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/7] HID: debug: Combine two seq_printf() calls into one call in hid_dump_device()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/7] HID: debug: Replace 12 seq_printf() calls by seq_puts()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/7] HID: debug: Replace five seq_printf() calls by seq_putc()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/7] HID: sensor-hub: Adjust two checks for null pointers in sensor_hub_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] HID: sensor-hub: Delete error messages for failed memory allocations in sensor_hub_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/7] HID: sensor-hub: Use devm_kcalloc() in sensor_hub_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/7] HID: Fine-tuning for some function implementations
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: Add support for TI ADC1x8s102
  • From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
• Re: [PATCH v2] tools/iio: Use include/uapi with __EXPORTED_HEADERS__
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: st_pressure: st_accel: Initialise sensor platform data properly
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] tools/iio: Use include/uapi with __EXPORTED_HEADERS__
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD and IIO due for the v4.12 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix a static checker error
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] iio: inkern: fix endless loop in error path
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• [PATCH v2] iio: inkern: fix endless loop in error path
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 06/11] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 08/11] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 11/11] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 09/11] i2c: i2c-mux-gpmux: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 10/11] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 07/11] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 05/11] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 04/11] mux: gpio: add mux controller driver for gpio based multiplexers
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 03/11] mux: minimal mux subsystem
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 02/11] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 01/11] devres: trivial whitespace fix
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v14 00/11] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] tools/iio: Use include/uapi with __EXPORTED_HEADERS__
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio: pressure: Fix name of BME280 part in Kconfig
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: add system sleep power management support
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: add system sleep power management support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: export st_lsm6dsx_flush_fifo() and st_lsm6dsx_set_fifo_mode() routines
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 2/2] iio: imu: st_lsm6dsx: add system sleep power management support
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 0/2] add power management support to st_lsm6dsx driver
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: add driver for the ti-adc084s021 chip
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v2] tools/iio: Use include/uapi with __EXPORTED_HEADERS__
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] iio: accel: bma180: Add ACPI enumeration support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix a static checker error
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: fix a static checker error
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: inkern: fix a static checker error
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Derive interface clock speed from fck clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: tools: generic_buffer: increase trigger length
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH] iio: adc: Derive interface clock speed from fck clock
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] Documentation: dt-bindings: iio: adc: add Meson8 and Meson8b support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 5/5] mfd: cros_ec: add RTC as mfd subdevice
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] mfd: cros_ec: Get rid of cros_ec_check_features from cros_ec_dev.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH] iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] iio: st_pressure: st_accel: Initialise sensor platform data properly
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: fix sampling_frequency read
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 3/3] iio: tools: generic_buffer: increase trigger length
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 0/3] iio: adc: sama5d2_adc hw triggers and buffers
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 4th set of new device support, features and cleanups for IIO in the 4.12 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 4th set of new device support, features and cleanups for IIO in the 4.12 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/3] Documentation: dt-bindings: iio: adc: add Meson8 and Meson8b support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/3] Meson8 / Meson8b support for the meson_saradc driver
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH] iio: proximity: as3935: recalibrate RCO after resume
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PULL] 4th set of new device support, features and cleanups for IIO in the 4.12 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: meter: fix indentation and spacing errors
  • From: Никола Јелић <nikola.jelic83@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: add system-wide suspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: accel: adis16203: fixed a brace coding style issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Enhancements for TI INA219/220 current/voltage monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD and IIO due for the v4.12 merge window
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: meter: fix indentation and spacing errors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: fix as3935_write
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad7303: fix channel description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad7303: fix channel description
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] drivers/staging/iio: braces {} are not necessary for single statement blocks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: proximity: as3935: fix as3935_write
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: dac: ad7303: fix channel description
  • From: plroskin@xxxxxxxxx
• Re: [PATCH v3 1/2] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: add system-wide suspend
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 08/10] i2c: i2c-mux-gpmux: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 09/10] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 10/10] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 05/10] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 01/10] devres: trivial whitespace fix
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 07/10] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 06/10] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 04/10] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 00/10] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] Staging: iio: accel: adis16203: fixed a brace coding style issue
  • From: René Hickersberger <renehickersberger@xxxxxxx>
• Re: [PATCH v2 1/7] iio: light: rpr0521 disable sensor -bugfix
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: light: apds9960: add system-wide suspend
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] Enhancements for TI INA219/220 current/voltage monitors
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• [PATCH] tools: iio: add ability to pass kernel headers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD and IIO due for the v4.12 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 5/5] mfd: cros_ec: add RTC as mfd subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/5] mfd: cros_ec: Get rid of cros_ec_check_features from cros_ec_dev.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/5] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH] iio: meter: fix indentation and spacing errors
  • From: Nikola Jelic <nikola.jelic83@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 2/5] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 2/2] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 0/2] Add STM32H7 DAC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: light: rpr0521 proximity offset read/write added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: light: rpr0521 sample_frequency read/write added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: light: rpr0521 whitespace fixes
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH] drivers/staging/iio: braces {} are not necessary for single statement blocks
  • From: Pushkar Jambhlekar <pushkar.iit@xxxxxxxxx>
• Re: [PATCH 3/3 v5] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v4 1/1] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR)
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v4 0/1] iio:meter:ade7759: use 4-digit octal permissions
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v2] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
• Re: Digital I/O in IIO
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: add max1117/max1118/max1119 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Fixed two style issues in ade7759.c file: * indentation for multi-line arguments in function declarations and calls * permissions converted to octal, instead of or-ed flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: dac: stm32: add support for trigger events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: trigger: add set_trigger callback to notify device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:meter:ade7759: realign the rest with opening bracket
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 2/2] iio:meter:ade7759: realign the rest with opening bracket
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v3 1/2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v3 0/2] iio:meter:ade7759: use 4-digit octal permissions
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: jmondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 3/3 v5] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3 v5] iio: xoadc: augment DT bindings a bit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3 v5] iio: adc: break out common code from SPMI VADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Digital I/O in IIO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: light: rpr0521 magic number to sizeof() on value read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: light: rpr0521 channel numbers reordered
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: light: rpr0521 proximity offset read/write added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: light: rpr0521 sample_frequency read/write added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: light: rpr0521 whitespace fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: light: rpr0521 disable sensor -bugfix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hid-sensor-hub: Implement batch mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Fix unbalanced pm_runtime_enable error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonah Petri <jonah@xxxxxxxxx>
• [PATCH v2] iio: hid-sensor-hub: Implement batch mode
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonah Petri <jonah@xxxxxxxxx>
• [PATCH] iio: hid-sensor: Fix unbalanced pm_runtime_enable error
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 7/7] iio: light: rpr0521 magic number to sizeof() on value read
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 4/7] iio: light: rpr0521 proximity offset read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 2/7] iio: light: rpr0521 whitespace fixes
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 3/7] iio: light: rpr0521 sample_frequency read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 5/7] iio: light: rpr0521 channel numbers reordered
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/7] iio: light: rpr0521 disable sensor -bugfix
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: light: rpr0521 proximity offset read/write added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: stm32 trigger: fix sampling_frequency read
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: Digital I/O in IIO
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 3/5] iio: trigger: add set_trigger callback to notify device
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/5] Add STM32H7 DAC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 4/5] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/5] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Digital I/O in IIO
  • From: George McCollister <george.mccollister@xxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 0/4] iio: adc: Maxim max9611 driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 5/6] iio: light: rpr0521 channel numbers reordered
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 2/6] iio: light: rpr0521 whitespace fixes
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 3/6] iio: light: rpr0521 sample_frequency read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 4/6] iio: light: rpr0521 proximity offset read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 1/6] iio: light: rpr0521 disable sensor -bugfix
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• RE: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 2/7] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/7] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 10/38] Annotate hardware config module parameters in drivers/iio/
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH v5 7/7] ARM: sun5i: chip: enable battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 6/7] ARM: dts: sun8i: sina33: enable battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v5 5/7] ARM: dtsi: axp22x: add battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 4/7] ARM: dtsi: axp209: add battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v4 8/8] ARM: sun8i: sina33: add highest OPP of CPUs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v4 5/8] ARM: sun8i: a33: add thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: input: touschcreen: remove sun4i documentation
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/8] ARM: sun8i: a33: add thermal sensor
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] ARM: sun8i: a33: Add devfreq-based GPU cooling
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 8/8] ARM: sun8i: sina33: add highest OPP of CPUs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 4/8] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: input: touschcreen: remove sun4i documentation
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/8] add thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 7/8] ARM: sun8i: a33: Add devfreq-based GPU cooling
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/7] add support for AXP20X and AXP22X battery power supply driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• RE: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
• RE: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: rockchip: add dts file for RK3328
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 6/6] dt-bindings: document rockchip rk3328-evb board
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 3/6] dt-bindings: soc: rockchip: grf: add support for rk3328
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: break out common code from SPMI VADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3 v5] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v5] iio: adc: break out common code from SPMI VADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v5] iio: xoadc: augment DT bindings a bit
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 7/7] mfd: cros_ec: add RTC as mfd subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v4 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v4 0/2] iio: stm32 trigger: Add quadrature device and counter
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 05/11] Documentation: DT: bindings: input: touschcreen: remove sun4i documentation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio:meter:ade7759: Removing use of deprecated macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: stm32: add dt option to set resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: stm32-adc: add option to set resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>