Linux IIO Development
[Prev Page][Next Page]
- [PATCH] tools: iio: Add ability to install/uninstall
- From: Peter Robinson <pbrobinson@xxxxxxxxx>
- Re: [PATCH 7/7] iio: adc: ad799x: use iio helper function to guarantee direct mode
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 6/7] iio: adc: ad7923: use iio helper function to guarantee direct mode
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 5/7] iio: adc: ad7887: use iio helper function to guarantee direct mode
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 4/7] iio: adc: ad7476: use iio helper function to guarantee direct mode
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 3/7] iio: adc: ad7793: claim direct mode when writing frequency
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 2/7] iio: adc: ad7791: claim direct mode when writing frequency
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 1/7] iio: adc: ad7266: claim direct mode during sensor read
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH 2/2] iio: light: bh1780: assign a static name
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2] iio: bh1780: dereference the client properly
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 3/3] iio: chemical: atlas-ph-sensor: add EC feature
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v3 2/3] iio: electricalconductivity: add IIO_ELECTRICALCONDUCTIVITY type
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v3 1/3] iio: chemical: atlas-ph-sensor: reorg driver to allow multiple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v3 0/3] atlas-ph-sensor: add conductivity sensor support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 1/3] iio: st_sensors: Init trigger before irq request
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 7/7] iio: adc: ad799x: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 6/7] iio: adc: ad7923: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 5/7] iio: adc: ad7887: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 4/7] iio: adc: ad7476: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 3/7] iio: adc: ad7793: claim direct mode when writing frequency
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 2/7] iio: adc: ad7791: claim direct mode when writing frequency
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 1/7] iio: adc: ad7266: claim direct mode during sensor read
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 0/7] iio: adc: clean up claims on direct mode in ad7* drivers
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [RFC] iio: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC PATCH v2] tools: iio: Rename generic_buffer to iio_generic_buffer
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [RFC PATCH] tools:iio: Rename generic_buffer
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH] iio: magnetometer: bmc150: Document Bosch supported chips
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 3/3] iio: st_sensors: Use level interrupts
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 1/3] iio: st_sensors: Init trigger before irq request
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 3/3] iio: st_sensors: Use level interrupts
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: st_sensors: Disable DRDY at init time
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: st_sensors: Init trigger before irq request
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: electricalconductivity: add IIO_ELECTRICALCONDUCTIVITY type
- From: jic23@xxxxxxxxxxxxxxxxxxxxx
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: jic23@xxxxxxxxxxxxxxxxxxxxx
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: electricalconductivity: add IIO_ELECTRICALCONDUCTIVITY type
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] iio: proximity: as3935: remove redundant MODULE_ALIAS
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v4 2/4] gpio: Allow PC/104 devices on X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 3/4] iio: stx104: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 1/4] isa: Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 0/4] Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v3 1/4] isa: Allow ISA-style drivers on modern systems
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 1/4] isa: Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v3 3/4] iio: stx104: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v3 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v3 2/4] gpio: Allow PC/104 devices on X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v3 0/4] Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v2 1/4] isa: Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v2 1/4] isa: Allow ISA-style drivers on modern systems
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- [PATCH v2 1/4] isa: Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 3/4] iio: stx104: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 0/4] Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- [PATCHv3 1/7] iio: generic_buffer: Cleanup when receiving signals
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCHv3 2/7] iio: generic_buffer: Add --device-num option
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCHv3 3/7] iio: generic_buffer: Add --trigger-num option
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 4/7] iio: Add current_trigger_id alternative
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 5/7] iio: generic_buffer: Use current_trigger_id
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 7/7] iio: Make trigger names unique
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 6/7] iio: Refuse to register triggers with duplicate names
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 0/7] Deal with iio trigger names
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: Drivers for Bitland Dual Accelerometer
- From: Lasse Schuirmann <lasse.schuirmann@xxxxxxxxx>
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: generic_buffer: Cleanup when receiving signals
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 2/2] iio: generic_buffer: Add --device-num option
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 1/2] iio: generic_buffer: Cleanup when receiving signals
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 0/4] Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH 3/4] iio: stx104: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH 2/4] gpio: Allow PC/104 devices on X86_64
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: jic23@xxxxxxxxxxxxxxxxxxxxx
- Re: Possible deadlock in mpu6050 on buffer disable?
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Possible deadlock in mpu6050 on buffer disable?
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC PATCH V2] iio:trigger: Experimental kthread tight loop trigger (thread only)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2 v7] iio: st_sensors: switch to a threaded interrupt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: proximity: as3935: fix buffer stack trashing
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: proximity: as3935: remove triggered buffer processing
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: electricalconductivity: add IIO_ELECTRICALCONDUCTIVITY type
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 45/54] MAINTAINERS: Add file patterns for staging iio device tree bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 20/54] MAINTAINERS: Add file patterns for iio device tree bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Note of a bug in st-sensors driver.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: Documentation: fix in_*_scale kernel version
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 45/54] MAINTAINERS: Add file patterns for staging iio device tree bindings
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH 20/54] MAINTAINERS: Add file patterns for iio device tree bindings
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] Staging: iio: Fix sparse endian warning
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] iio: proximity: as3935: fix buffer stack trashing
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 3/3] iio: proximity: as3935: fix buffer stack trashing
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 2/3] iio: proximity: as3935: remove triggered buffer processing
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 1/3] iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 0/3] iio: proximity: as3935: fix major drivers
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2] iio: pressure: bmp280: add humidity support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] max44000: Remove scale from proximity
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: light: jsa1212: remove unneeded i2c check functionality test
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: nau7802: Expose possible gains in sysfs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5] iio: max5487: Add support for Maxim digital potentiometers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Export I2C module alias information
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 1/2 v7] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: Drivers for Bitland Dual Accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [patch v2] iio: humidity: am2315: Remove a stray unlock
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFT PATCH] iio: magn: Add support for BMM150 magnetometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: generic_buffer: Add --device-num option
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: generic_buffer: Cleanup when receiving signals
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: correct humidity integration time mask
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: correct humidity integration time mask
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] iio: humidity: hdc100x: correct humidity integration time mask
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH 1/2] iio: generic_buffer: Cleanup when receiving signals
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 2/2] iio: generic_buffer: Add --device-num option
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 1/2] iio: generic_buffer: Cleanup when receiving signals
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH] max44000: Remove scale from proximity
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [RFC] dynamic iio consumer channel mapping
- From: jic23@xxxxxxxxxxxxxxxxxxxxx
- Re: Drivers for Bitland Dual Accelerometer
- From: Lasse Schuirmann <lasse.schuirmann@xxxxxxxxx>
- Re: Drivers for Bitland Dual Accelerometer
- From: jic23@xxxxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 2/7] iio: inv_mpu6050: Initial regcache support
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH v2 2/7] iio: inv_mpu6050: Initial regcache support
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v2 2/7] iio: inv_mpu6050: Initial regcache support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC] dynamic iio consumer channel mapping
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2] iio: pressure: bmp280: add humidity support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2 3/3] iio: chemical: atlas-ph-sensor: add EC feature
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2 2/3] iio: electricalconductivity: add IIO_ELECTRICALCONDUCTIVITY type
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2 0/3] atlas-ph-sensor: add conductivity sensor support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2 1/3] iio: chemical: atlas-ph-sensor: reorg driver to allow multiple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [RFC] iio: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: Drivers for Bitland Dual Accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: light: jsa1212: remove unneeded i2c check functionality test
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] iio: light: jsa1212: remove unneeded i2c check functionality test
- From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
- Drivers for Bitland Dual Accelerometer
- From: Lasse Schuirmann <lasse.schuirmann@xxxxxxxxx>
- [RFC] iio: add driver for si114x ambient light / proximity sensors
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH] iio: adc: nau7802: Expose possible gains in sysfs
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [RFC] dynamic iio consumer channel mapping
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [RFC] dynamic iio consumer channel mapping
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v5] iio: max5487: Add support for Maxim digital potentiometers
- From: Cristina Moraru <cristina.moraru09@xxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [RFC] dynamic iio consumer channel mapping
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3] iio: max5487: Add support for Maxim digital potentiometers
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC v2 7/7] iio: inv_mpu6050: Expose channels from slave sensors
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [RFC v2 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] iio: adc: nau7802: Expose possible gains in sysfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH] iio: adc: nau7802: Expose possible gains in sysfs
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/7] iio: inv_mpu6050: Do burst reads using spi/i2c directly
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 0/7] iio: inv_mpu6050: Support i2c master and external readings
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 2/7] iio: inv_mpu6050: Initial regcache support
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 3/7] iio: inv_mpu6050: Only toggle DATA_RDY_EN in inv_reset_fifo
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 4/7] iio: inv_mpu6050: Cache non-volatile bits of user_ctrl
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC v2 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v2 6/7] iio: inv_mpu6050: Reformat sample for active scan mask
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC v2 7/7] iio: inv_mpu6050: Expose channels from slave sensors
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [RFT PATCH] iio: magn: Add support for BMM150 magnetometer
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v4] iio: max5487: Add support for Maxim digital potentiometers
- From: Cristina Moraru <cristina.moraru09@xxxxxxxxx>
- [PATCH] iio: adc: ti-ads1015: add datasheet names
- From: Matt Ranostay <matt.ranostay@xxxxxxxxx>
- [PATCH] iio: Export I2C module alias information
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v3] iio: max5487: Add support for Maxim digital potentiometers
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v3] iio: max5487: Add support for Maxim digital potentiometers
- From: Cristina Moraru <cristina.moraru09@xxxxxxxxx>
- [patch v2] iio: humidity: am2315: Remove a stray unlock
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [patch] iio: humidity: Remove a stray unlock
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- RE: [patch] iio: humidity: Remove a stray unlock
- From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
- [patch] iio: humidity: Remove a stray unlock
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2] iio: pressure: bmp280: add humidity support
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: Scale and FS range information (was: Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part)
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: Scale and FS range information (was: Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part)
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Scale and FS range information (was: Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part)
- From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
- Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v5 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- Re: [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt
- From: jic23@xxxxxxxxxxxxxxxxxxxxx
- Re: [RFC] Make the devm_iio_device_alloc call set iio_dev.dev.parent.
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <matt.ranostay@xxxxxxxxx>
- Re: [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] iio: light: jsa1212: remove unneeded i2c check functionality test
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [RFC] Make the devm_iio_device_alloc call set iio_dev.dev.parent.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] iio: potentiometer: tpl0102: remove unneeded i2c check functionality test
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
- Re: [PATCH -next] iio: pressure: bmp280: fix error message for wrong chip id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4] iio: accel: Add support for Freescale MMA7660FC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 4/9] iio:st_sensors: align on storagebits boundaries
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: light apds9960: Add the missing dev.parent
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: triggers: Make trigger ops structure explicitly non optional.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/2] iio: accel: Add support for Bosch BMA220
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: IIO trigger names are not actually unique
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: staging:iio:triggers introduce iio_trigger_ops to take const bits out of iio_trig_structure.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: pressure: bmp280: add humidity support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: potentiometer: tpl0102: remove unneeded i2c check functionality test
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: st_sensors: Disable DRDY at init time
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: st_sensors: Init trigger before irq request
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v6] iio: st_sensors: read surplus samples in trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: st_sensors: Use level interrupts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 2/3] iio: st_sensors: Disable DRDY at init time
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 3/3] iio: st_sensors: Use level interrupts
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 1/3] iio: st_sensors: Init trigger before irq request
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH] iio: potentiometer: tpl0102: remove unneeded i2c check functionality test
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver
- From: Sasha Levin <sasha.levin@xxxxxxxxxx>
- [patch V4 26/31] iio: use parity32 in adxrs450
- From: zengzhaoxiu@xxxxxxx
- Re: [PATCH v4] iio: light: new driver for the ROHM BH1780
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4] iio: light: new driver for the ROHM BH1780
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 2/2 v6] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2] iio: pressure: bmp280: add humidity support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH v2] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <matt.ranostay@xxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 2/2 v6] iio: st_sensors: read surplus samples in trigger
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 2/2 v6] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Crt Mori <cmo@xxxxxxxxxxx>
- re: staging:iio:triggers introduce iio_trigger_ops to take const bits out of iio_trig_structure.
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part
- From: Matt Ranostay <matt.ranostay@xxxxxxxxx>
- Re: [PATCH 2/2] iio: st_sensors: read surplus samples in trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: st_sensors: read surplus samples in trigger
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 1/2] iio: st_sensors: switch to a threaded interrupt
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 2/2] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: IIO trigger names are not actually unique
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio: ad5755: Add DT binding documentation
- From: Sean Nyekjær <sean.nyekjaer@xxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: st_sensors: read surplus samples in trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2 v4] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2 v4] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] iio: st_sensors: switch to a threaded interrupt
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH v2] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] iio: st_sensors: read surplus samples in trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] iio: st_sensors: switch to a threaded interrupt
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH v2] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: st_sensors: verify interrupt event to status
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] iio: st_sensors: switch to a threaded interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PULL] IIO fixes for 4.6d (inv mpu6050 acpi regression)
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PULL] IIO fixes for 4.6d (inv mpu6050 acpi regression)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v4 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH v4 0/2] Add support for the Bosch BMA220 accelerometer
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH v4 1/2] iio: accel: Add support for Bosch BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- IIO trigger names are not actually unique
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH] iio: light apds9960: Add the missing dev.parent
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] iio: light apds9960: Add the missing dev.parent
- From: Yong Li <sdliyong@xxxxxxxxx>
- [PATCH v2] iio: pressure: bmp280: add humidity support
- From: Matt Ranostay <matt.ranostay@xxxxxxxxx>
- Re: [PATCH v9 0/9] i2c mux cleanup and locking update
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v9 1/9] i2c: allow adapter drivers to override the adapter locking
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 3/9] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 2/9] i2c: muxes always lock the parent adapter
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 5/9] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 4/9] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 6/9] [media] si2168: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 7/9] [media] rtl2832: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 9/9] [media] rtl2832: regmap is aware of lockdep, drop local locking hack
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 8/9] [media] rtl2832_sdr: get rid of empty regmap wrappers
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 0/9] i2c mux cleanup and locking update
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH 04/13] iio: health/afe440x: Always use separate gain values
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/7] iio: inv_mpu6050: Check channel configuration on preenable
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC] iio: Add support for describing scan offsets in buffer ops
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] iio: st_sensors: verify interrupt event to status
- From: Crestez Dan Leonard <cdleonard@xxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC] iio: Add support for describing scan offsets in buffer ops
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 6/7] iio: inv_mpu6050: Check channel configuration on preenable
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 09/13] iio: health/afe440x: Use regmap fields
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH 08/13] iio: health/afe440x: Remove channel names
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH 04/13] iio: health/afe440x: Always use separate gain values
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: bmi160: Fix output data rate for accel
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: bmi160: Fix ODR setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] imu: bmi160: Add avail frequency and scale attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 01/13] iio: health/afe440x: Fix kernel-doc format
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [patch] iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 02/13] iio: health/afe440x: Remove of_match_ptr and ifdefs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 03/13] iio: health/afe440x: Remove unneeded initializers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 05/13] iio: health/afe440x: Fix scan_index assignment
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 04/13] iio: health/afe440x: Always use separate gain values
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 06/13] iio: health/afe440x: Remove unneeded offset handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 07/13] iio: health/afe4404: Remove LED3 input channel
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 08/13] iio: health/afe440x: Remove channel names
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 09/13] iio: health/afe440x: Use regmap fields
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 10/13] iio: health/afe440x: Make gain settings a modifier for the stages
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 11/13] iio: health/afe440x: Match LED currents to stages
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 12/13] iio: health/afe440x: Remove unused definitions
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 13/13] iio: health/afe4404: ENSEPGAIN is part of CONTROL2 register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 00/13] Rework for AFE440x drivers to prepare for AFE4405
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFT PATCH] iio: magn: Add support for BMM150 magnetometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: chemical: atlas-ph-sensor: reorg driver to allow multiple chips
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/3] Introduce support for creating IIO devices via configfs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [RFC] Make the devm_iio_device_alloc call set iio_dev.dev.parent.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: mma8452: add support for oversampling ratio
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: light: bh1780: return after write
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/7] iio: inv_mpu6050: Check channel configuration on preenable
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCHv2] iio: Fix error handling in iio_trigger_attach_poll_func
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V3 0/3] iio: mxs-lradc: simplify TS handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V3 3/3] iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V3 2/3] iio: mxs-lradc: remove mxs_lradc_ts_unregister
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V3 1/3] iio: mxs-lradc: simplify TS registration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC] iio: Add support for describing scan offsets in buffer ops
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: trigger->ops structure optional?
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: st_sensors: verify interrupt event to status
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] iio: mma8452: add support for oversampling ratio
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: st_sensors: verify interrupt event to status
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v7 18/24] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] iio: st_sensors: verify interrupt event to status
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Crestez Dan Leonard <cdleonard@xxxxxxxxx>
- Re: [PATCH 3/4] iio: st_sensors: verify interrupt event to status
- From: Crestez Dan Leonard <cdleonard@xxxxxxxxx>
- trigger->ops structure optional?
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [RFC PATCH v1 4/9] iio:st_sensors: align on storagebits boundaries
- From: Crestez Dan Leonard <cdleonard@xxxxxxxxx>
- [RFC] iio: Add support for describing scan offsets in buffer ops
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 6/7] iio: inv_mpu6050: Check channel configuration on preenable
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCHv2] iio: Fix error handling in iio_trigger_attach_poll_func
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [RFC] iio: Release irq if set_trigger_state fails
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v4] iio: accel: Add support for Freescale MMA7660FC
- From: Constantin Musca <constantin.musca@xxxxxxxxx>
- Re: [was iio: tmp006: Set correct iio name] how to support multiple instances of same device type
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [was iio: tmp006: Set correct iio name] how to support multiple instances of same device type
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Antti Palosaari <crope@xxxxxx>
- Re: [PATCH 3/3] input: touchscreen: mxs-lradc: Add support for touchscreen
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/7] iio: inv_mpu6050: Do burst reads using spi/i2c directly
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 0/3] mxs-lradc: Add support for current sources
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH 0/3] mxs-lradc: Add support for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [RFC PATCH v1 4/9] iio:st_sensors: align on storagebits boundaries
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [PATCH V3 0/3] iio: mxs-lradc: simplify TS handling
- From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
- [PATCH v2 10/10] gpio: ws16c48: Utilize the ISA bus driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 09/10] gpio: 104-idio-16: Utilize the ISA bus driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 08/10] gpio: 104-idi-48: Utilize the ISA bus driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 07/10] gpio: 104-dio-48e: Utilize the ISA bus driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 05/10] iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 04/10] iio: stx104: Add X86 dependency to STX104 Kconfig option
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 03/10] Documentation: Add ISA bus driver documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 02/10] isa: Implement the max_num_isa_dev macro
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 01/10] isa: Implement the module_isa_driver macro
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 00/10] Use the ISA bus driver for PC/104 and ISA devices
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH 1/7] iio: inv_mpu6050: Do burst reads using spi/i2c directly
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/7] iio: inv_mpu6050: Initial regcache support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/7] iio: inv_mpu6050: Cache non-volatile bits of user_ctrl
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/7] iio: inv_mpu6050: Only toggle DATA_RDY_EN in inv_reset_fifo
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/7] iio: inv_mpu6050: Check channel configuration on preenable
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 7/7] iio: inv_mpu6050: Add support for external sensors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/3] mxs-lradc: Add support for current sources
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/3] Add available sampling frequency and scale attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: bmi160: Fix output data rate for accel
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 03/10] Documentation: Add ISA bus driver documentation
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] imu: bmi160: Add avail frequency and scale attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [patch] iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC] iio: Release irq if set_trigger_state fails
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 4/9] iio:st_sensors: align on storagebits boundaries
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 1/9] iio:st_pressure:initial lps22hb sensor support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: light: bh1780: return after write
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] input: touchscreen: mxs-lradc: Add support for touchscreen
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 00/10] Use the ISA bus driver for PC/104 and ISA devices
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: mxs-lradc: Add support for adc driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V3 0/3] iio: mxs-lradc: simplify TS handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: accel: Add support for Bosch BMA220
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 08/13] iio: health/afe440x: Remove channel names
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 12/13] iio: health/afe440x: Remove unused definitions
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 04/13] iio: health/afe440x: Always use separate gain values
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 02/13] iio: health/afe440x: Remove of_match_ptr and ifdefs
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 13/13] iio: health/afe4404: ENSEPGAIN is part of CONTROL2 register
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 03/13] iio: health/afe440x: Remove unneeded initializers
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 11/13] iio: health/afe440x: Match LED currents to stages
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 06/13] iio: health/afe440x: Remove unneeded offset handling
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 01/13] iio: health/afe440x: Fix kernel-doc format
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 09/13] iio: health/afe440x: Use regmap fields
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 10/13] iio: health/afe440x: Make gain settings a modifier for the stages
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 07/13] iio: health/afe4404: Remove LED3 input channel
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 00/13] Rework for AFE440x drivers to prepare for AFE4405
- From: "Andrew F. Davis" <afd@xxxxxx>
- [PATCH 05/13] iio: health/afe440x: Fix scan_index assignment
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH 3/3] input: touchscreen: mxs-lradc: Add support for touchscreen
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 3/3] input: touchscreen: mxs-lradc: Add support for touchscreen
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH] iio: ak8975: Support adapters limited to BYTE_DATA
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 2/7] iio: inv_mpu6050: Initial regcache support
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 3/7] iio: inv_mpu6050: Only toggle DATA_RDY_EN in inv_reset_fifo
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 1/7] iio: inv_mpu6050: Do burst reads using spi/i2c directly
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 4/7] iio: inv_mpu6050: Cache non-volatile bits of user_ctrl
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH 6/7] iio: inv_mpu6050: Check channel configuration on preenable
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 7/7] iio: inv_mpu6050: Add support for external sensors
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 0/3] mxs-lradc: Add support for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH 0/3] mxs-lradc: Add support for current sources
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Constantin Musca <constantin.musca@xxxxxxxxx>
- [PATCH v3 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH v3 1/2] iio: accel: Add support for Bosch BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH v3 0/2] Add support for the Bosch BMA220 accelerometer
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- Re: [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 2/3] iio: adc: mxs-lradc: Add support for adc driver
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 3/3] input: touchscreen: mxs-lradc: Add support for touchscreen
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v2 1/2] iio: accel: Add support for Bosch BMA220
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Martin Kepplinger <martink@xxxxxxxxx>
- [PATCH v2 1/2] iio: accel: Add support for Bosch BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH v2 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH v2 0/2] Add support for the Bosch BMA220 accelerometer
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- RE: [PATCH 2/2] iio: accel: Add triggered buffer support for BMA220
- From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
- Re: [PATCH v2] iio: accel: Add support for Freescale MMA7660FC
- From: Constantin Musca <constantin.musca@xxxxxxxxx>
- [PATCH v3] iio: accel: Add support for Freescale MMA7660FC
- From: Constantin Musca <constantin.musca@xxxxxxxxx>
- [PATCH 3/3] input: touchscreen: mxs-lradc: Add support for touchscreen
- From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
- [PATCH 2/3] iio: adc: mxs-lradc: Add support for adc driver
- From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
- [PATCH 1/3] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
- [PATCH 0/3] mxs-lradc: Split driver into MFD
- From: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
- [PATCH 1/3] iio: bmi160: Fix output data rate for accel
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH 2/3] iio: bmi160: Fix ODR setting
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH 3/3] imu: bmi160: Add avail frequency and scale attributes
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH 0/3] Add available sampling frequency and scale attributes
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: accel: Add support for Bosch BMA220
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 2/2] iio: accel: Add triggered buffer support for BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH 1/2] iio: accel: Add support for Bosch BMA220
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- [PATCH 0/2] Add support for the Bosch BMA220 accelerometer
- From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Peter Rosin <peda@xxxxxxxxxx>
- [patch] iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2] iio: accel: Add support for Freescale MMA7660FC
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v2] iio: accel: Add support for Freescale MMA7660FC
- From: Constantin Musca <constantin.musca@xxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC] iio: Release irq if set_trigger_state fails
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH -next] iio: pressure: bmp280: fix error message for wrong chip id
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- [PATCH] iio: accel: Add support for Freescale MMA7660FC
- From: Constantin Musca <constantin.musca@xxxxxxxxx>
- [PATCH] iio: light: bh1780: return after write
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH] iio: inv_mpu6050: Do burst reads using spi/i2c directly
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- re: iio: light: new driver for the ROHM BH1780
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- Re: [RFT PATCH] iio: magn: Add support for BMM150 magnetometer
- From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: pressure: bmp280: add support for BMP180
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [RFC PATCH v1 0/9] iio:st_sensors: fixes and lps22hb pressure sensor
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Yong Li <sdliyong@xxxxxxxxx>
- Re: [PATCH v3 1/2] iio: pressure: bmp280: add support for BMP180
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: Regression in inv_mpu6050: 4.6.0-rc5
- From: Michael Welling <mwelling@xxxxxxxx>
- Regression in inv_mpu6050: 4.6.0-rc5
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- Re: [PULL] Second set of new drivers, features and cleanups for IIO in the 4.7 cycle
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PULL] Third set of IIO fixes in the 4.6 cycle.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH] iio: generic_buffer: add watermark logic
- From: Doru Gucea <doru.gucea@xxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Yong Li <sdliyong@xxxxxxxxx>
- [RFT PATCH] iio: magn: Add support for BMM150 magnetometer
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Yong Li <sdliyong@xxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V3 2/3] iio: mxs-lradc: remove mxs_lradc_ts_unregister
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH V3 1/3] iio: mxs-lradc: simplify TS registration
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Crestez Dan Leonard <cdleonard@xxxxxxxxx>
- [PULL] Second set of new drivers, features and cleanups for IIO in the 4.7 cycle
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: tmp006: Set correct iio name
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] iio: inv_mpu6050: Add explicit support for MPU9150
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: inv_mpu6050: Remove inv_mpu6050_hw.num_reg
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: inv_mpu6050: Cleanup hw_info mapping
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PULL] Third set of IIO fixes in the 4.6 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- RE: [PATCH 5/5] iio: inv_mpu6050: Add explicit support for MPU9150
- From: Ge Gao <GGao@xxxxxxxxxxxxxx>
- Re: [PATCH 3/5] iio: inv_mpu6050: Check WHO_AM_I register on probe
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V4] iio: pressure: hp03: Add Hope RF HP03 sensor support
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v2 1/3] iio: Add support for creating IIO devices via configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v2 3/3] Documentation: iio: Add IIO software devices docs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v2 2/3] iio: dummy: Convert IIO dummy to configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v2 0/3] Introduce support for creating IIO devices via configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH] iio: mma8452: add support for oversampling ratio
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH 3/5] iio: inv_mpu6050: Check WHO_AM_I register on probe
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH v3 2/2] iio: pressure: bmp280: add ability to control oversampling rate
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [PATCH v3 1/2] iio: pressure: bmp280: add support for BMP180
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [RFC PATCH 0/3] Introduce support for creating IIO devices via configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v3 2/2] iio: pressure: bmp280: add ability to control oversampling rate
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 2/2] iio: pressure: bmp280: add ability to control oversampling rate
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 2/2] iio: chemical: atlas-ph-sensor: add EC feature
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 1/2] iio: chemical: atlas-ph-sensor: reorg driver to allow multiple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH 0/2] iio: chemical: atlas-ph-sensor: add conductivity sensor support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 0/2] iio: pressure: bmp280: add support for BMP180 and oversampling rate control
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 2/2] iio: pressure: bmp280: add ability to control oversampling rate
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH v3 1/2] iio: pressure: bmp280: add support for BMP180
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH v3 0/2] iio: pressure: bmp280: add support for BMP180 and oversampling rate control
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [RFC PATCH 3/3] Documentation: iio: Add IIO software devices docs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH 2/3] iio: dummy: Convert IIO dummy to configfs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH 0/3] Introduce support for creating IIO devices via configfs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] iio: inv_mpu6050: Add explicit support for MPU9150
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/5] iio: inv_mpu6050: Check WHO_AM_I register on probe
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: inv_mpu6050: Remove inv_mpu6050_hw.num_reg
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: inv_mpu6050: Cleanup hw_info mapping
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 9/9] iio:st_sensors: fix power regulator usage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 9/9] iio:st_sensors: fix power regulator usage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 6/9] iio:st_pressure: temperature triggered buffering
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 4/9] iio:st_sensors: align on storagebits boundaries
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v1 1/9] iio:st_pressure:initial lps22hb sensor support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 5/5] max44000: Initial triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/5] max44000: Expose ambient sensor scaling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/5] max44000: Support controlling LED current output
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/5] max44000: Initial support for proximity reading
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/5] max44000: Initial support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: humidity: Add triggered buffer support for AM2315
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: humidity: Add support for AM2315
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V4] iio: pressure: hp03: Add Hope RF HP03 sensor support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: st_gyro: Add lsm9ds0-gyro support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Documentation: iio: Add IIO software devices docs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [patch] iio: light: apds9960: silence uninitialized variable warning
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 3/3] iio:imu:mpu6050: enhance mounting matrix support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 2/3] iio:ak8975: add mounting matrix support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/3] iio:core: mounting matrix support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH V3 0/3] iio: mxs-lradc: simplify TS handling
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH V3 3/3] iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH V3 1/3] iio: mxs-lradc: simplify TS registration
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH V3 2/3] iio: mxs-lradc: remove mxs_lradc_ts_unregister
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: Nonlinear outputs
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 3/3] iio:imu:mpu6050: enhance mounting matrix support
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 2/3] iio:ak8975: add mounting matrix support
- From: Rob Herring <robh@xxxxxxxxxx>
- Nonlinear outputs
- From: Daniel Glöckner <dg@xxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
- Re: [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH 1/3] iio: mxs-lradc: Add regulators for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- [PATCH 3/3] ARM: dts: imx28: Provide regulators for the current sources of the LRADC
- From: Harald Geyer <harald@xxxxxxxxx>
- [PATCH 2/3] ARM: dts: imx23: Provide regulators for the current sources of the LRADC
- From: Harald Geyer <harald@xxxxxxxxx>
- [PATCH 0/3] mxs-lradc: Add support for current sources
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v8 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [patch] iio: light: apds9960: silence uninitialized variable warning
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH] iio: tmp006: Set correct iio name
- From: Yong Li <sdliyong@xxxxxxxxx>
- Re: [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH RFT V2 1/3] iio: mxs-lradc: simplify TS registration
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH RFT V2 1/3] iio: mxs-lradc: simplify TS registration
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH RFT V2 2/3] iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH RFT V2 3/3] iio: mxs-lradc: implement suspend/resume support
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH RFT V2 2/3] iio: mxs-lradc: disable only masked channels in mxs_lradc_hw_stop
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH RFT V2 1/3] iio: mxs-lradc: simplify TS registration
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH RFT V2 0/3] iio: mxs-lradc: implement PM ops
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH V4 2/2] thermal: generic-adc: Add ADC based thermal sensor driver
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCH V4 2/2] thermal: generic-adc: Add ADC based thermal sensor driver
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Antti Palosaari <crope@xxxxxx>
- Re: [PATCH V4 2/2] thermal: generic-adc: Add ADC based thermal sensor driver
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: bmg160 driver
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- bmg160 driver
- From: Patrick Doyle <wpdster@xxxxxxxxx>
- [PATCH v1 3/3] iio:imu:mpu6050: enhance mounting matrix support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v1 2/3] iio:ak8975: add mounting matrix support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v1 1/3] iio:core: mounting matrix support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH] iio: inv_mpu6050: Add support for auxiliary I2C master
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- [PATCH v1 0/3] iio sensor mounting matrix support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Documentation: iio: Add IIO software devices docs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v7 22/24] [media] rtl2832: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Documentation: iio: Add IIO software devices docs
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [RFC PATCH 1/3] iio: Add support for creating IIO devices via configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [RFC PATCH 2/3] iio: dummy: Convert IIO dummy to configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [RFC PATCH 3/3] Documentation: iio: Add IIO software devices docs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [RFC PATCH 0/3] Introduce support for creating IIO devices via configfs
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v7 09/24] [media] m88ds3103: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 08/24] iio: imu: inv_mpu6050: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 03/24] i2c: i2c-mux-pinctrl: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 10/24] [media] rtl2830: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 11/24] [media] rtl2832: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 02/24] i2c: i2c-mux-gpio: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 13/24] [media] cx231xx: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 16/24] i2c: allow adapter drivers to override the adapter locking
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 20/24] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 21/24] [media] si2168: change the i2c gate to be mux-locked
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 23/24] [media] rtl2832_sdr: get rid of empty regmap wrappers
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 24/24] [media] rtl2832: regmap is aware of lockdep, drop local locking hack
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 19/24] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 18/24] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 15/24] i2c-mux: drop old unused i2c-mux api
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 17/24] i2c: muxes always lock the parent adapter
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 06/24] i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 14/24] of/unittest: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 12/24] [media] si2168: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 04/24] i2c: i2c-arb-gpio-challenge: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 05/24] i2c: i2c-mux-pca9541: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 07/24] i2c: i2c-mux-reg: convert to use an explicit i2c mux core
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 01/24] i2c-mux: add common data for every i2c-mux instance
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v7 00/24] i2c mux cleanup and locking update
- From: Peter Rosin <peda@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Scanners]
[Yosemite Forum]