With current event-only driver, it is not possible for user space application to know current senses if they don't change since application starts. Address that by adding raw access to channels. Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx> --- drivers/iio/adc/hi8435.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/iio/adc/hi8435.c b/drivers/iio/adc/hi8435.c index 678e8c7ea763..cb8e6342eddf 100644 --- a/drivers/iio/adc/hi8435.c +++ b/drivers/iio/adc/hi8435.c @@ -105,6 +105,26 @@ static int hi8435_writew(struct hi8435_priv *priv, u8 reg, u16 val) return spi_write(priv->spi, priv->reg_buffer, 3); } +static int hi8435_read_raw(struct iio_dev *idev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct hi8435_priv *priv = iio_priv(idev); + u32 tmp; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = hi8435_readl(priv, HI8435_SO31_0_REG, &tmp); + if (ret < 0) + return ret; + *val = !!(tmp & BIT(chan->channel)); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + static int hi8435_read_event_config(struct iio_dev *idev, const struct iio_chan_spec *chan, enum iio_event_type type, @@ -333,6 +353,7 @@ static const struct iio_chan_spec_ext_info hi8435_ext_info[] = { .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = num, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .event_spec = hi8435_events, \ .num_event_specs = ARRAY_SIZE(hi8435_events), \ .ext_info = hi8435_ext_info, \ @@ -376,6 +397,7 @@ static const struct iio_chan_spec hi8435_channels[] = { static const struct iio_info hi8435_info = { .driver_module = THIS_MODULE, + .read_raw = hi8435_read_raw, .read_event_config = &hi8435_read_event_config, .write_event_config = hi8435_write_event_config, .read_event_value = &hi8435_read_event_value, -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html