Linux IIO Development

• Thread Index

• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: add ADE9078
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• [PULL] 1st set of IIO fixes for 5.17
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/8] PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/8] iio: humidity: hts221: Move symbol exports into IIO_HTS221 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 8/8] iio: imu: lsm6dsx: Move exported symbols to the IIO_LSM6DSX namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/8] IIO: Where dev_pm_ops rework and namespaces meet.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/8] iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/8] iio:accel:kxsd9: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/8] iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/8] iio: imu: lsm6dsx: Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/8] iio: humidity: hts221: Use EXPORT_SIMPLE_DEV_PM_OPS() to allow compiler to remove dead code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: gyro: mpu3050: Use pm_ptr() and DEFINE_RUNTIME_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: gyro: mpu3050: Drop unused symbol exports.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] iio: gyro: mpu3050: Cleanup exports and PM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/5] iio: adc: qcom-vadc: Move symbol exports to IIO_QCOM_VADC namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/5] iio: adc: adi-axi: Move exported symbols into IIO_ADI_AXI namespace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/5] iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/5] iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/5] iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/5] 3rd set of IIO export namspaces.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: core: drop iio_get_time_res()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/7] iio: potentiometer: Add support for DS3502
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] iio: core: provide a default value `label` property
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC PATCH] iio: core: provide a default value `label` property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/5] Add ADXL367 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx-ams: Use devm_delayed_work_autocancel() to simplify code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v4 5/7] iio: potentiometer: Add device specific read_raw function
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 3/7] iio: potentiometer: Add channel information in device data
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 2/7] iio: potentiometer: Add available functionality
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 7/7] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 6/7] iio: potentiometer: Add support for Maxim DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 1/7] iio: potentiometer: Alignment to match the open parenthesis
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 4/7] iio: potentiometer: Change to firmware provided data
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 0/7] iio: potentiometer: Add support for DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: frequency: admv4420.c: Add support for ADMV4420
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 5/9] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/9] spmi: add a helper to look up an SPMI device from a device node
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 5/5] iio: accel: sca3300: Add inclination channels.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 0/5] iio: accel: sca3300: add compitible for scl3300
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: adxl345: Add ACPI HID table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 07/13] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 13/13] docs: iio: add documentation for BNO055 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 12/13] iio: imu: add BNO055 I2C driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 09/13] iio: document "serial_number" sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 08/13] iio: document bno055 private sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: frequency: Add ADMV4420 doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [v3 05/13] iio: document pitch, yaw, roll modifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v3 02/13] iio: document linear acceleration modifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v5 2/2] iio: frequency: admv4420.c: Add support for ADMV4420
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: frequency: Add ADMV4420 doc
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• RE: [PATCH v4 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: "Pop, Cristian" <Cristian.Pop@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/7] cros_ec_sensors: Drop unused IIO header includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: microchip,mcp3201: fix interface type (I2C -> SPI)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4] iio: accel: adxl345: Add ACPI HID table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 5/6] iio: potentiometer: Add support for Maxim DS3502
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: potentiometer: Add support for Maxim DS3502
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: adxl345: Add ACPI HID table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/20] iio:adc:ad7280a Cleanup and proposed staging graduation.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 00/50] iio: Tree wide switch from CONFIG_PM* to pm_[sleep]_ptr etc.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/16] 2nd set of IIO export namespaces
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/13] IIO: accel/st-sensors move into separate symbol namespaces
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: mma8452: Fix 'mma8452_dt_ids' defined but not used compiler warning
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] iio:frequency:admv4420.c: Add support for ADMV4420
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v4 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v4] iio: accel: adxl345: Add ACPI HID table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH V2 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [v3 11/13] iio: imu: add BNO055 serdev driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 6/6] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 5/6] iio: potentiometer: Add support for Maxim DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 2/6] iio: potentiometer: Add available functionality
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 4/6] iio: potentiometer: Change to firmware provided data
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 3/6] iio: potentiometer: Add channel information in device data
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 1/6] iio: potentiometer: Alignment to match the open parenthesis
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 0/6] iio: potentiometer: Add support for DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v4] iio: accel: adxl345: Add ACPI HID table
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH V2 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [v3 07/13] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [v3 11/13] iio: imu: add BNO055 serdev driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/3] iio: meter: add ADE9078 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: add meter subdirectory
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• [v3 09/13] iio: document "serial_number" sysfs attribute
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 01/13] iio: add modifiers for linear acceleration
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 02/13] iio: document linear acceleration modifiers
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 12/13] iio: imu: add BNO055 I2C driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 11/13] iio: imu: add BNO055 serdev driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 07/13] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 08/13] iio: document bno055 private sysfs attributes
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 06/13] iio: event_monitor: add pitch, yaw and roll modifiers
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 00/13] Add support for Bosch BNO055 IMU
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 03/13] iio: event_monitor: add linear acceleration modifiers
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 04/13] iio: add modifers for pitch, yaw, roll
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 05/13] iio: document pitch, yaw, roll modifiers
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 13/13] docs: iio: add documentation for BNO055 driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [v3 10/13] dt-bindings: iio: imu: add documentation for Bosch BNO055 bindings
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: add ADE9078
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: add meter subdirectory
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: add ADE9078
  • From: chegbeli <ciprian.hegbeli@xxxxxxxxxx>
• [PATCH 3/3] iio: meter: add ADE9078 driver
  • From: chegbeli <ciprian.hegbeli@xxxxxxxxxx>
• [PATCH 1/3] iio: add meter subdirectory
  • From: chegbeli <ciprian.hegbeli@xxxxxxxxxx>
• [PATCH 0/3] Add ADE9078 Driver
  • From: chegbeli <ciprian.hegbeli@xxxxxxxxxx>
• [PATCH v3 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v3 2/2] iio:frequency:admv4420.c: Add support for ADMV4420
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH V2 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 5/5] iio: accel: sca3300: Add inclination channels.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 0/5] iio: accel: sca3300: add compitible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: accel: adxl345: Add ACPI HID table
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: microchip,mcp3201: fix interface type (I2C -> SPI)
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• [RFC PATCH] iio: core: provide a default value `label` property
  • From: Nandor Han <nandor.han@xxxxxxxxxxx>
• [PATCH v7 9/9] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 8/9] arm64: dts: qcom: sdm845-db845c: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 7/9] arm64: dts: qcom: sdm845-oneplus: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 6/9] arm64: dts: qcom: pmi8998: add rradc node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 5/9] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 4/9] dt-bindings: iio: adc: document qcom-spmi-rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 3/9] mfd: qcom-spmi-pmic: read fab id on supported PMICs
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 0/9] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 1/9] spmi: add a helper to look up an SPMI device from a device node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v7 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 00/12] iio: buffer-dma: write() and new DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v6 9/9] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 8/9] arm64: dts: qcom: sdm845-db845c: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 7/9] arm64: dts: qcom: sdm845-oneplus: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 6/9] arm64: dts: qcom: pmi8998: add rradc node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 5/9] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 4/9] dt-bindings: iio: adc: document qcom-spmi-rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 3/9] mfd: qcom-spmi-pmic: read fab id on supported PMICs
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 1/9] spmi: add a helper to look up an SPMI device from a device node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v6 0/9] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 7/9] arm64: dts: qcom: sdm845-oneplus: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 3/9] mfd: qcom-spmi-pmic: read fab id on supported PMICs
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 4/9] dt-bindings: iio: adc: document qcom-spmi-rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 5/9] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 1/9] spmi: add a helper to look up an SPMI device from a device node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 0/9] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 2/9] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 9/9] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 6/9] arm64: dts: qcom: pmi8998: add rradc node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v5 8/9] arm64: dts: qcom: sdm845-db845c: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v3] iio: accel: adxl345: Add ACPI HID table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] iio: accel: adxl345: Add ACPI HID table
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v3] iio: accel: adxl345: Add ACPI HID table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v8 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 3/4] Documentation:ABI:testing:admv1014: add ABI docs
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 4/4] MAINTAINERS: add maintainer for ADMV1014 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3] iio: accel: adxl345: Add ACPI HID table
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: potentiometer: Add support for Maxim DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v4 1/8] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH] iio: use div64_u64() instead of do_div()
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v2 00/13] IIO: accel/st-sensors move into separate symbol namespaces
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/2] Add support for Azoteq IQS620A(T) V3
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 0/4] iio: potentiometer: Add support for DS3502
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: potentiometer: Add support for Maxim DS3502
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] iio: potentiometer: Add available functionality
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/4] iio: potentiometer: Alignment to match the open parenthesis
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: use div64_u64() instead of do_div()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: mma8452: Fix 'mma8452_dt_ids' defined but not used compiler warning
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: mma8452: Fix 'mma8452_dt_ids' defined but not used compiler warning
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH v2 00/13] IIO: accel/st-sensors move into separate symbol namespaces
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: add maintainer for ADA4250 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: mma8452: Fix 'mma8452_dt_ids' defined but not used compiler warning
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 13/13] iio: core: Clarify the modes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v5 2/5] iio: ABI: document mag_referenced
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 0/5] Add ADXL367 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 3/5] iio: ABI: add note about configuring other attributes during buffer capture
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 1/5] iio: introduce mag_referenced
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 5/5] iio: accel: add ADXL367 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: iio: accel: add ADXL367
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v7 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v7 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v7 4/4] MAINTAINERS: add maintainer for ADMV1014 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v7 3/4] Documentation:ABI:testing:admv1014: add ABI docs
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 2/4] iio: potentiometer: Add available functionality
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 3/4] iio: potentiometer: Add support for Maxim DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 1/4] iio: potentiometer: Alignment to match the open parenthesis
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 0/4] iio: potentiometer: Add support for DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v3 00/20] iio:adc:ad7280a Cleanup and proposed staging graduation.
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 01/12] iio: buffer-dma: Get rid of outgoing queue
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: use div64_u64() instead of do_div()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 01/12] iio: buffer-dma: Get rid of outgoing queue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: use div64_u64() instead of do_div()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 00/12] iio: buffer-dma: write() and new DMABUF based API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/13] iio: core: Clarify the modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: xilinx-ams: Use devm_delayed_work_autocancel() to simplify code
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v6 3/4] Documentation:ABI:testing:admv1014: add ABI docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: Silan SC7A20 accelerometer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: trigger: stm32-timer: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: mma8452: Add support for the "mount-matrix" device property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: mma8452: Fix probe failing when an i2c_device_id is used
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: mma8452: Fix probe failing when an i2c_device_id is used
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: use div64_u64() instead of do_div()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: ssp_sensors: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/8] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: versal-sysmon: fix for_each_child.cocci warnings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V5 0/4] thermal: qcom: Add support for PMIC5 Gen2 ADC_TM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: as3935: Use devm_delayed_work_autocancel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: as3935: Use devm_delayed_work_autocancel()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH V5 2/4] iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V5 3/4] thermal: qcom: Add support for multiple generations of devices
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V5 4/4] thermal: qcom: add support for PMIC5 Gen2 ADCTM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V5 1/4] dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH V5 0/4] thermal: qcom: Add support for PMIC5 Gen2 ADC_TM
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• [PATCH v15 04/10] iio: afe: rescale: fix accuracy for small fractional scales
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 03/10] iio: afe: rescale: add offset support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 08/10] iio: afe: rescale: add temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 09/10] dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 07/10] iio: afe: rescale: add RTD temperature sensor support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 10/10] dt-bindings: iio: afe: add bindings for temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 05/10] iio: afe: rescale: reduce risk of integer overflow
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 00/10] iio: afe: add temperature rescaling support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 01/10] iio: afe: rescale: expose scale processing function
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v15 02/10] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH] iio: versal-sysmon: fix for_each_child.cocci warnings
  • From: Julia Lawall <julia.lawall@xxxxxxxx>
• [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 3/3] MAINTAINERS: add maintainer for ADA4250 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add support for Maxim DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 7/8] arm64: dts: qcom: sdm845-db845c: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 4/8] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 2/8] mfd: qcom-spmi-pmic: read fab id on supported PMICs
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 8/8] arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 6/8] arm64: dts: qcom: sdm845-oneplus: enable rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 0/8] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 5/8] arm64: dts: qcom: pmi8998: add rradc node
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 1/8] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH v4 3/8] dt-bindings: iio: adc: document qcom-spmi-rradc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH 04/49] iio: fix opencoded for_each_set_bit()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH RESEND 0/2] Solve data access delay of ST sensors
  • From: TOSCANELLI Massimo <massimo.toscanelli@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 5/5] iio: accel: add ADXL367 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v14 02/11] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• RE: [PATCH 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: IIO driver/datasheet question
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings:iio:amplifiers: add ada4250 doc
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: add maintainer for ADA4250 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/3] iio:amplifiers:ada4250: add support for ADA4250
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 0/3] Add support for ADA4250 Programmable Instrumentation Amplifier
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v2 0/2] counter: push event on every pulse
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 04/49] iio: fix opencoded for_each_set_bit()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/2] Solve data access delay of ST sensors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: add always_on flag
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 04/49] iio: fix opencoded for_each_set_bit()
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• Re: [PATCH 2/2] iio: potentiometer: Add support for Maxim DS3502
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v14 06/11] iio: afe: rescale: make use of units.h
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v14 02/11] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v14 03/11] iio: afe: rescale: add offset support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v14 02/11] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH V1 2/6] iio: accel: sca3300: Add interface for operation modes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v1 1/1] iio: ssp_sensors: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: temperature: ltc2983: Use single error path to put OF node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/7] iio: adc: sc27xx: structure adjuststment and optimization
  • From: Baolin Wang <baolin.wang7@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: st: Add Silan SC7A20 accelerometer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add silan vendor prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Xilinx AMS fixes
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: iio: adc: zynqmp_ams: Add clock entry
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v14 09/11] iio: afe: rescale: add temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v14 03/11] iio: afe: rescale: add offset support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: trigger: stm32-timer: Make use of device properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: IIO driver/datasheet question
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 50/50] iio:adc:stm32*: Use pm[_sleep]_ptr() etc to avoid need to make pm __maybe_unused
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• IIO driver/datasheet question
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 00/50] iio: Tree wide switch from CONFIG_PM* to pm_[sleep]_ptr etc.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH] iio: use div64_u64() instead of do_div()
  • From: Qing Wang <wangqing@xxxxxxxx>
• Re: [PATCH v14 09/11] iio: afe: rescale: add temperature transducers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 03/11] iio: afe: rescale: add offset support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 2/2] iio: mma8452: Add support for the "mount-matrix" device property
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 1/2] iio: mma8452: Fix probe failing when an i2c_device_id is used
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v14 10/11] dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 00/11] iio: afe: add temperature rescaling support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 02/11] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 07/11] iio: test: add basic tests for the iio-rescale driver
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 11/11] dt-bindings: iio: afe: add bindings for temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 09/11] iio: afe: rescale: add temperature transducers
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 06/11] iio: afe: rescale: make use of units.h
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 08/11] iio: afe: rescale: add RTD temperature sensor support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 05/11] iio: afe: rescale: reduce risk of integer overflow
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 04/11] iio: afe: rescale: fix accuracy for small fractional scales
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 03/11] iio: afe: rescale: add offset support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v14 01/11] iio: afe: rescale: expose scale processing function
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: mma8452: Fix probe failing when an i2c_device_id is used
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: mma8452: Fix probe failing when an i2c_device_id is used
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: adc: cpcap-adc: remove redundant assignment to variable cal_data_diff
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [BUG] iio: light: opt3001: possible deadlock in opt3001_read_raw() and opt3001_irq()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Joe Perches <joe@xxxxxxxxxxx>
• RE: [PATCH v6 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• [BUG] iio: light: opt3001: possible deadlock in opt3001_read_raw() and opt3001_irq()
  • From: Jia-Ju Bai <baijiaju1990@xxxxxxxxx>
• [PATCH v3 00/13] Miscellaneous IIO core enhancements
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 3/4] Documentation:ABI:testing:admv1014: add ABI docs
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v2 07/12] iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevant
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 03/13] iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 01/13] iio: core: Enhance the kernel doc of modes and currentmodes iio_dev entries
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 04/13] iio: st_sensors: Return as early as possible from the _write_raw() callbacks
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 06/12] iio: st_sensors: Stop abusing mlock to ensure internal coherency
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 10/13] iio: core: Hide read accesses to iio_dev->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• RE: [PATCH v6 3/4] Documentation:ABI:testing:admv1014: add ABI docs
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• [PATCH v3 13/13] iio: core: Clarify the modes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 12/12] iio: core: Clarify the modes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 12/13] iio: core: Simplify the registration of kfifo buffers
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 06/13] iio: st_sensors: Add a local lock for protecting odr
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 08/13] iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevant
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 11/13] iio: core: Move the currentmode entry to the opaque structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 05/13] iio: st_sensors: Drop the protection on _avail functions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 07/13] iio: st_sensors: Stop abusing mlock to ensure internal coherency
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 02/13] iio: magnetometer: rm3100: Stop abusing the ->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 09/13] iio: Un-inline iio_buffer_enabled()
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v6 4/4] MAINTAINERS: add maintainer for ADMV1014 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH RESEND 0/2] Solve data access delay of ST sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v6 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v6 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH] iio: adc: cpcap-adc: remove redundant assignment to variable cal_data_diff
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v2 04/12] iio: buffer-dmaengine: Enable write support
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 03/12] iio: buffer-dmaengine: Support specifying buffer direction
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 11/12] iio: buffer-dmaengine: Add support for cyclic buffers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 08/12] iio: buffer-dma: Implement new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 07/12] iio: buffer-dma: Use DMABUFs instead of custom solution
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 05/12] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 02/12] iio: buffer-dma: Enable buffer write support
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 10/12] iio: core: Add support for cyclic buffers
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 12/12] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/12] iio: buffer-dma: split iio_dma_buffer_fileio_free() function
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 00/12] iio: buffer-dma: write() and new DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 09/12] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v2 01/12] iio: buffer-dma: Get rid of outgoing queue
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: temperature: ltc2983: Use single error path to put OF node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: temperature: ltc2983: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: mma8452: Add support for the "mount-matrix" device property
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/2] iio: mma8452: Fix probe failing when an i2c_device_id is used
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [jic23-iio:fixes-togreg] BUILD SUCCESS 21472ddd425831f6cf39b3034e825df2825ec850
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [jic23-iio:fixes-togreg] BUILD SUCCESS 21472ddd425831f6cf39b3034e825df2825ec850
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [jic23-iio:fixes-togreg] BUILD SUCCESS 21472ddd425831f6cf39b3034e825df2825ec850
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: temperature: ltc2983: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH RESEND 0/2] Solve data access delay of ST sensors
  • From: Massimo Toscanelli <massimo.toscanelli@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: st_magn_core.c: activate always_on attribute
  • From: Massimo Toscanelli <massimo.toscanelli@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: st_sensors: add always_on flag
  • From: Massimo Toscanelli <massimo.toscanelli@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: potentiometer: Add support for Maxim DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH 0/2] iio: potentiometer: Add support for DS3502
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: potentiometer: Add Maxim DS3502 in trivial-devices
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: iio: accel: add ADXL367
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 5/5] iio: accel: add ADXL367 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 3/5] iio: ABI: add note about configuring other attributes during buffer capture
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 1/5] iio: introduce mag_referenced
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 0/5] Add ADXL367 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 2/5] iio: ABI: document mag_referenced
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v3 20/20] iio:adc:ad7280a: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 19/20] staging:iio:adc:ad7280a: Use more conservative delays to allow 105C operation.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 18/20] staging:iio:adc:ad7280a: Remove shift from cb_mask state cache.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 17/20] iio:adc:ad7280a: Document ABI for cell balance switches
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 16/20] dt-bindings:iio:adc:ad7280a: Add binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 15/20] staging:iio:adc:ad7280a: Drop buggy support for early termination of AUX alert.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 14/20] staging:iio:adc:ad7280a: Use device properties to replace platform data.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 12/20] staging:iio:ad7280a: Reflect optionality of irq in ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 13/20] staging:iio:adc:ad7280a: Use a local dev pointer to avoid &spi->dev
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 11/20] staging:iio:adc:ad7280a: Cleanup includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 10/20] staging:iio:adc:ad7280a: Make oversampling_ratio a runtime control
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 09/20] staging:iio:adc:ad7280a: Trivial comment formatting cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 08/20] staging:iio:adc:ad7280a: Drop unused timestamp channel.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 07/20] staging:iio:adc:ad7280a: Standardize extended ABI naming
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 06/20] staging:iio:adc:ad7280a: Switch to standard event control
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 05/20] staging:iio:adc:ad7280a: Use bitfield ops to managed fields in transfers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 04/20] staging:iio:adc:ad7280a: Split buff[2] into tx and rx parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 03/20] staging:iio:adc:ad7280a: rename _read() to _read_reg()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 02/20] staging:iio:adc:ad7280a: Register define cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 01/20] staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 00/20] iio:adc:ad7280a Cleanup and proposed staging graduation.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 17/17] iio:adc:ad7280a: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings:iio:adc:ad7280a: Add binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/17] staging:iio:adc:ad7280a: Use bitfield ops to managed fields in transfers.
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 14/17] staging:iio:adc:ad7280a: Use device properties to replace platform data.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/17] staging:iio:adc:ad7280a: Switch to standard event control
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/17] staging:iio:adc:ad7280a: Use bitfield ops to managed fields in transfers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/17] staging:iio:adc:ad7280a: Register define cleanup.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/12] iio: core: Clarify the modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/12] iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/12] iio: st_sensors: Stop abusing mlock to ensure internal coherency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/3] iio: imu: inv_mpu6050: Drop wrong use of ACPI_PTR()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: temperature: ltc2983: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v1 1/2] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH v1 2/2] iio: temperature: ltc2983: Make use of device properties
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 10/10] iio: core: Clarify the modes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• RE: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings:iio:adc:ad7280a: Add binding
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  • From: "lorenzo.bianconi@xxxxxxxxxx" <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 10/10] iio: core: Clarify the modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/3] iio: imu: inv_mpu6050: Drop wrong use of ACPI_PTR()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] iio: core: Simplify the registration of kfifo buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: multiplexer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: temperature: ltc2983: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio:frequency:admv4420.c: Add support for ADMV4420
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: CHECK: Macro argument reuse
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: accel: adxl355: Replace custom definitions with generic from units.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: multiplexer: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: dac: add support for ltc2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: temperature: maxim_thermocouple: Switch from of headers to mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: temperature: mlx90632: Switch from of headers to mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: trigger: stm32-timer: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: humidity: dht11: Switch from of headers to mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/3] iio: Silan SC7A20 accelerometer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: frequency: adf4350: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: temperature: ltc2983: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: amplifiers: hmc425a: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: chemical: bme680: Switch from of headers to mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/3] iio: imu: inv_mpu6050: Drop wrong use of ACPI_PTR()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: dac: ad5592r: Drop leftover header inclusion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: ABI: add ABI file for the LTC2688 DAC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/3] Add support for LTC2688
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• RE: [PATCH] iio: stmpe-adc: Use correctly sized arguments for bit field
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: Add ltc2688 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] counter: Set counter device name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] counter: Set counter device name
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] counter: Stop using dev_get_drvdata() to get the counter device
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] counter: Set counter device name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] counter: interrupt-cnt: add counter_push_event()
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v1] counter: fix NULL pointer dereference on counter_comp_u8_store()
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: Set counter device name
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: stmpe-adc: Use correctly sized arguments for bit field
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: accel: st_accel: Add support for Silan SC7A20
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: iio: st: Add Silan SC7A20 accelerometer
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add silan vendor prefix
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] iio: imu: inv_mpu6050: Check ACPI companion directly
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/3] iio: imu: inv_mpu6050: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] iio: imu: inv_mpu6050: Drop wrong use of ACPI_PTR()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] counter: interrupt-cnt: add counter_push_event()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] counter: push event on every pulse
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] counter: add new COUNTER_EVENT_CHANGE_OF_STATE
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1] counter: fix NULL pointer dereference on counter_comp_u8_store()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: dac: ad5592r: Drop leftover header inclusion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: chemical: bme680: Switch from of headers to mod_devicetable.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: chemical: atlas-ezo-sensor: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: amplifiers: hmc425a: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: temperature: ltc2983: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] iio: temperature: ltc2983: Don't hard code defined constants in messages
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: frequency: adf4350: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] counter: interrupt-cnt: add counter_push_event()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] counter: Set counter device name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] counter: interrupt-cnt: add counter_push_event()
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] counter: Set counter device name
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v1] counter: interrupt-cnt: add counter_push_event()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: iio: st: Add Silan SC7A20 accelerometer
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v2 3/3] iio: accel: st_accel: Add support for Silan SC7A20
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add silan vendor prefix
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v2 0/3] iio: Silan SC7A20 accelerometer support
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v13 02/11] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v13 08/11] iio: afe: rescale: add RTD temperature sensor support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v1 1/1] iio: temperature: mlx90632: Switch from of headers to mod_devicetable.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: temperature: maxim_thermocouple: Switch from of headers to mod_devicetable.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: multiplexer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: multiplexer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: trigger: stm32-timer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: trigger: stm32-timer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: humidity: dht11: Switch from of headers to mod_devicetable.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: frequency: adf4350: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: multiplexer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: trigger: stm32-timer: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: accel: adxl355: Replace custom definitions with generic from units.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 02/11] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 08/11] iio: afe: rescale: add RTD temperature sensor support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 03/12] iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: BMI160 accelerometer on AyaNeo tablet
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] counter: interrupt-cnt: add counter_push_event()
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PROBLEM]: Error during probing process in inv_icm42600_i2c driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: phy: Add compatible for Mediatek MT8186
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 12/12] iio: core: Clarify the modes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 11/12] iio: core: Simplify the registration of kfifo buffers
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 10/12] iio: core: Move the currentmode entry to the opaque structure
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 09/12] iio: core: Hide read accesses to iio_dev->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 08/12] iio: Un-inline iio_buffer_enabled()
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 07/12] iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevant
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 06/12] iio: st_sensors: Stop abusing mlock to ensure internal coherency
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 05/12] iio: st_sensors: Add a local lock for protecting odr
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 04/12] iio: st_sensors: Drop the protection on _avail functions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 03/12] iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 02/12] iio: magnetometer: rm3100: Stop abusing the ->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 01/12] iio: core: Enhance the kernel doc of modes and currentmodes iio_dev entries
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 00/12] Miscellaneous IIO core enhancements
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 10/10] iio: core: Clarify the modes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v1] counter: interrupt-cnt: add counter_push_event()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• CHECK: Macro argument reuse
  • From: "Hegbeli, Ciprian" <Ciprian.Hegbeli@xxxxxxxxxx>
• Re: [PATCH 04/10] iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 07/10] iio: core: Hide write accesses to iio_dev->currentmode
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 09/10] iio: core: Simplify the registration of kfifo buffers
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: adxl355: use fwnode_irq_get_byname()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio:frequency:admv4420.c: Add support for ADMV4420
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v2 1/2] dt:bindings:iio:frequency: Add ADMV4420 doc
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 04/10] iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 11/13] iio:accel:fxl8962af: Move exports into IIO_FXL8962AF namespace
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v13 06/11] iio: afe: rescale: make use of units.h
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 00/50] iio: Tree wide switch from CONFIG_PM* to pm_[sleep]_ptr etc.
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 06/16] iio:dac:ad5592r: Move exports into IIO_AD5592R namespace
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/16] iio:adc:ad7091r: Move exports into IIO_AD7091R namespace.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 42/50] iio:temperature:mlx90614: Switch from CONFIG_PM* guards to pm_ptr() etc
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PROBLEM]: Error during probing process in inv_icm42600_i2c driver
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  • From: Mario TESI <mario.tesi@xxxxxx>
• Re: [PATCH 3/3] iio: accel: st_accel: Add support for Silan SC7A20
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v13 00/11] iio: afe: add temperature rescaling support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 00/16] 2nd set of IIO export namespaces
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 00/16] 2nd set of IIO export namespaces
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/4] math.h: Introduce data types for fractional numbers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 4/4] MAINTAINERS: add maintainer for ADMV1014 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v5 3/4] Documentation:ABI:testing:admv1014: add ABI docs
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v5 2/4] dt-bindings:iio:frequency: add admv1014 binding
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v5 1/4] iio:frequency:admv1014: add support for ADMV1014
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: IIO Device Driver for Maxim DS3502 potentiometer
  • From: jagath jogj <jagathjog1996@xxxxxxxxx>
• [PATCH 16/16] iio:chemical:bme680: Move exports to IIO_BME680 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 15/16] iio:light:st_uvis25: Move exports to IIO_UVIS25 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/16] iio:magnetometer:hmc5843: Move exports to IIO_HMC5843 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 13/16] iio:magnetometer:bmc150: Move exports to IIO_BMC150_MAGN namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 12/16] iio:magnetometer:rm3100: Move exports to IIO_RM3100 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/16] iio:pressure:mpl115: Move exports into IIO_MPL115 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/16] iio:pressure:ms5611: Move exports into IIO_MS5611 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/16] iio:pressure:zpa2326: Move exports into IIO_ZPA2326 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/16] iio:imu:adis: Move exports into IIO_ADISLIB namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/16] iio:dac:ad5686: Move exports into IIO_AD5686 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/16] iio:dac:ad5592r: Move exports into IIO_AD5592R namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/16] iio:common:ssp_sensors: Move exports into IIO_SSP_SENSORS namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/16] iio:common:meas-spec: Move exports into IIO_MEAS_SPEC_SENSORS
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/16] iio:adc:ad76060: Move exports into IIO_AD7606 namespace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/16] iio:adc:ad7091r: Move exports into IIO_AD7091R namespace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/16] iio:adc:ad_sigma_delta: Move exports into IIO_AD_SIGMA_DELTA namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/16] 2nd set of IIO export namespaces
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 17/17] iio:adc:ad7280a: Move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings:iio:adc:ad7280a: Add binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/17] staging:iio:adc:ad7280a: Use device properties to replace platform data.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/17] staging:iio:ad7280a: Reflect optionality of irq in ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/13] IIO: accel/st-sensors move into separate symbol namespaces
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 50/50] iio:adc:stm32*: Use pm[_sleep]_ptr() etc to avoid need to make pm __maybe_unused
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 49/50] iio:light:rpr0521: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 48/50] iio:chemical:atlas: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 47/50] iio:proximity:pulsedlight: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 46/50] iio:light:bh1780: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 44/50] iio:adc:stm32:Switch from CONFIG_PM guards to pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 45/50] iio:adc:rcar: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 43/50] iio:adc:ab8500: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 42/50] iio:temperature:mlx90614: Switch from CONFIG_PM* guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 41/50] iio:imu:kmx61: Switch from CONFIG_PM* guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 40/50] iio:dac:m62332: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 39/50] iio:accel:bma180: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 38/50] iio:accel:stk8312: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 37/50] iio:temperature:tmp007: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 36/50] iio:temperature:tmp006: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 35/50] iio:proximity:sx9500: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 34/50] iio:proximity:rfd77492: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 33/50] iio:proximity:as3935: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 32/50] iio:pressure:mpl3115: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 31/50] iio:magn:mmc35240: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 30/50] iio:magn:mag3110: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 29/50] iio:magn:ak8975: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 28/50] iio:light:tsl4531: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 27/50] iio:light:tsl2563: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 26/50] iio:light:tcs3472: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 25/50] iio:light:tcs3414: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 24/50] iio:light:stk3310: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 22/50] iio:light:jsa1212: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 23/50] iio:light:ltr501: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 21/50] iio:light:isl29125: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 20/50] iio:light:isl29018: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 19/50] iio:light:cm3232: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 18/50] iio:light:apds9300: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 17/50] iio:dac:vf610: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>