The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17: Linux 5.18-rc1 (2022-04-03 14:08:21 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.19a for you to fetch changes up to eda75f8238b079a41aa11383bd47dc3297e74cb1: iio: ti-ads8688: use of_device_id for OF matching (2022-05-01 19:01:13 +0100) ---------------------------------------------------------------- First set of IIO new device support, features and cleanup for 5.19 Usual mixed bag. Stand out this time is Andy Shevchenko's continuing effort to move drivers over the generic firmware interfaces. Device support * sprd,sc2720 - upm9620 binding addition. - Refactor and support for sc2720, sc2721 and sc2730. * ti,ads1015 - Refactor driver and add support for TLA2024. Device support (IDs only) * invensense,mpu6050 - Add ID for ICM-20608-D. * st,accel: - Add ID for lis302dl. * st,lsm6dsx - Add support for ASM330LHHX (can fallback to LSM6DSR.) Features * convert drivers to device properties - IIO core - adi,ad7266 - adi,adis16480 - adi,adxl355 - bosch,bmi160 - domintech,dmard06 - fsl,fxas21002c - invensense,mpu3050 - linear,ltc2983 - linear,ltc2632 - maxbotix,mb1232 - maxim,max31856 - maxim,max31865 - multiplexer - ping - rescale - taos,tsl2772 * core - Add runtime check on whether realbits fit in storagebits for each channel. * adi,ad_sigma_delta - Add sequencer support and relevant update_scan_mode callbacks for adi,ad7192 and adi,ad7124. Cleanup and minor fixes * MAINTAINERS - Update Lorenzo Bianconi's email address for IIO drivers. - Add entry for ad3552r and update maintainer in dt-binding doc. * tree-wide - Replace strtobool() with kstrtobool(). - Drop false OF dependencies. * core - Tidy up and document IIO modes. - Take iio_buffer_enabled() out of header allowing current_mode to be moved to the opaque structure. - As all kfifo buffers use the same mode value, drop that parameter and set it unconditionally. - White space fixes and similar. - Drop use of list iterator variable for list_for_each_entry_continue_reverse and use list_prepare_entry to restart. * sysfs-trigger - Replace use of 'found' variable with dedicate list iterator variable. * adi,ad7124 - Drop misleading shift. * adi,ad2s1210 - Remove redundant local variable assignment. * adi,adis16480 - Use local device pointer to reduce repetition. - Improve handling of clocks. * domintech,dmard09 - White space. * dummy driver - Improve error handling. * fsl,mma8452 - Add missing documentation of name element. * invensense,mpu3050 - Stop remove() returning non 0. * kionix,kxsd9 - White space. * linear,ltc2688 - Use local variable for struct device. - Combine of_node_put() error handling paths. * linear,ltc2983 - Avoid use of constants in messages where a define is available. * microchip,mcp4131 - Fix compatible in dt example. * pni,rm3100 - Stop directly accessing iio_dev->current_mode just to find out if the buffer is enabled. * renesas,rzg2l - Relax kconfig constraint to include newer devices. * sprd,sc27xx - Fix wrong scaling mask. - Improve the calibration values. * samsung,ssp - Replace a 'found' variable in favor of an explicit value that was found. * sensortek,stk3xx - Add proximity-near-level binding and driver support. * st,st_sensors: - Drop unused accel_type enum. - Return early in *_write_raw() - Drop unnecessary locking in _avail functions. - Add local lock to protect odr against concurrent updates allowing mlock to no longer be used outside of the core. - Use iio_device_claim_direct_mode() rather than racy checking of the current mode. * st,stmpe-adc - Fix checks on wait_for_completion_timeout(). - Allow use of of_device_id for matching. * st,stm32-dfsdm - Stop accessing iio_dev->current_mode to find out if the buffer is enabled (so we can hide that variable in the opaque structure) * st,vl53l0x - Fix checks on wait_for_completion_timeout. * ti,ads1015 - Add missing ID for ti,ads1115 in binding doc. - Convert from repeated chip ID look up to selecting static const data. - Switch to read_avail() callback. * ti,ads8688 - Use of_device_id for driver matching. * ti,palmas-adc - Drop a warning on minor calibration mismatch leading to slightly negative values after applying the calibration. ---------------------------------------------------------------- Alexander Vorwerk (1): iio: core: fix a few code style issues Alexandru Tachici (5): iio: adc: ad7124: Remove shift from scan_type iio: adc: ad7124: Add update_scan_mode iio: adc: ad7192: Add update_scan_mode iio: adc: ad7124: add sequencer support iio: adc: ad7192: add sequencer support Andy Shevchenko (25): iio: dac: ltc2688: Use temporary variable for struct device iio: multiplexer: Make use of device properties iio: temperature: ltc2983: Don't hard code defined constants in messages iio: temperature: ltc2983: Use single error path to put OF node iio: temperature: ltc2983: Make use of device properties iio: imu: bmi160: Make use of device properties iio: dac: vf610: Drop dependency on OF iio: dac: lpc18xx: Drop dependency on OF iio: dac: dpot: Drop dependency on OF iio: afe: rescale: Make use of device properties iio: accel: dmard06: Drop dependency on OF iio: temperature: max31856: Make use of device properties iio: light: cm3605: Drop dependency on OF iio: magnetometer: ak8974: Drop dependency on OF iio: proximity: ping: Replace OF specific code by device_get_match_data() iio: light: tsl2772: Make use of device properties iio: core: Convert to use firmware node handle instead of OF node iio: gyro: mpu3050: Make use of device properties iio: gyro: fxas21002c: Make use of device properties iio: imu: adis16480: Make use of device properties iio: imu: adis16480: Use temporary variable for struct device iio: imu: adis16480: Improve getting the optional clocks iio: proximity: mb1232: Switch to use fwnode_irq_get() iio: temperature: max31865: Make use of device properties iio: dac: ltc2632: Make use of device properties Arnaud Ferraris (2): dt-bindings: iio: light: stk33xx: Add proximity-near-level iio: proximity: stk3310: Export near level property for proximity sensor Biju Das (1): dt-bindings: iio: adc: Document Renesas RZ/V2L ADC Cixi Geng (7): dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding iio: adc: sc27xx: fix read big scale voltage not right iio: adc: sc27xx: Fine tune the scale calibration values iio: adc: sc27xx: structure adjustment and optimization iio: adc: sc27xx: refactor some functions for support more PMiCs iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 iio: adc: sc27xx: add support for PMIC sc2730 Colin Ian King (1): staging: iio: ad2s1210: remove redundant assignment to variable negative H. Nikolaus Schaller (1): iio: palmas: shut up warning about calibration mismatch (due to noise) Jakob Koschel (3): iio: buffer: remove usage of list iterator variable for list_for_each_entry_continue_reverse() iio: ssp_sensors: replace usage of found with dedicated list iterator variable iio: sysfs-trigger: replace usage of found with dedicated list iterator variable Jonathan Cameron (1): iio: accel: mma8452: Add missing documentation for name element of chip_info Krzysztof Kozlowski (2): iio: stmpe-adc: use of_device_id for OF matching iio: ti-ads8688: use of_device_id for OF matching Lad Prabhakar (1): iio: adc: Kconfig: Make RZG2L_ADC depend on ARCH_RZG2L Lars-Peter Clausen (2): iio: adc: ad_sigma_delta: Add sequencer support iio: Replace strtobool() with kstrtobool() Lorenzo Bianconi (3): MAINTAINERS: updated Lorenzo's email address iio: imu: st_lsm6dsx: add support to ASM330LHHX dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhx device bindings Marek Vasut (11): iio: core: Print error and fail iio_device_register() in case sample bits do not fit storage bits dt-bindings: iio: adc: ti,ads1015: Add missing ADS1115 compatible string dt-bindings: iio: adc: ti,ads1015: Add TLA2024 compatible string iio: adc: ti-ads1015: Switch to static const writeable ranges table iio: adc: ti-ads1015: Deduplicate channel macros iio: adc: ti-ads1015: Make channel event_spec optional iio: adc: ti-ads1015: Add TLA2024 support iio: adc: ti-ads1015: Add static assert to test if shifted realbits fit into storagebits iio: adc: ti-ads1015: Convert to OF match data iio: adc: ti-ads1015: Replace data_rate with chip data struct ads1015_data iio: adc: ti-ads1015: Switch to read_avail Maíra Canal (1): iio: adc: ad7266: convert probe to full device-managed Miaoqian Lin (2): iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value check iio: proximity: vl53l0x: Fix return value check of wait_for_completion_timeout Michael Srba (2): dt-bindings: iio: imu: mpu6050: Document invensense,icm20608d iio: imu: inv_mpu6050: Add support for ICM-20608-D Miquel Raynal (13): iio: core: Enhance the kernel doc of modes and currentmodes iio_dev entries iio: magnetometer: rm3100: Stop abusing the ->currentmode iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmode iio: st_sensors: Return as early as possible from the _write_raw() callbacks iio: st_sensors: Drop the protection on _avail functions iio: st_sensors: Add a local lock for protecting odr iio: st_sensors: Stop abusing mlock to ensure internal coherency iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevant iio: Un-inline iio_buffer_enabled() iio: core: Hide read accesses to iio_dev->currentmode iio: core: Move the currentmode entry to the opaque structure iio: core: Simplify the registration of kfifo buffers iio: core: Clarify the modes Nuno Sá (2): dt-bindings: iio: dac: change ad3552r maintainer MAINTAINERS: add ad3552r Paul Lemmermann (2): iio: accel: dmard09: fixed code styling issues iio: accel: kxsd9-spi: changed leading spaces to tabs Puranjay Mohan (1): iio: accel: adxl355: use fwnode_irq_get_byname() Rob Herring (1): dt-bindings: iio: Fix incorrect compatible strings in examples Sicelo A. Mhlongo (3): dt-bindings: iio: st,st-sensors add LIS302DL iio: accel: Remove unused enum in st_accel iio: accel: add support for LIS302DL variant Uwe Kleine-König (1): iio: gyro: mpu3050: Make mpu3050_common_remove() return void Xiaoke Wang (1): iio: dummy: iio_simple_dummy: check the return value of kstrdup() .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 3 +- .../bindings/iio/adc/sprd,sc2720-adc.yaml | 60 ++- .../devicetree/bindings/iio/adc/ti,ads1015.yaml | 7 +- .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 2 +- .../devicetree/bindings/iio/dac/lltc,ltc2632.yaml | 2 +- .../bindings/iio/imu/invensense,mpu6050.yaml | 34 +- .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 38 +- .../devicetree/bindings/iio/light/stk33xx.yaml | 6 + .../iio/potentiometer/microchip,mcp4131.yaml | 2 +- .../devicetree/bindings/iio/st,st-sensors.yaml | 1 + MAINTAINERS | 12 +- drivers/iio/accel/Kconfig | 1 - drivers/iio/accel/adxl355_core.c | 7 +- drivers/iio/accel/adxl367.c | 1 - drivers/iio/accel/bmc150-accel-core.c | 4 +- drivers/iio/accel/dmard09.c | 2 +- drivers/iio/accel/fxls8962af-core.c | 1 - drivers/iio/accel/kxsd9-spi.c | 4 +- drivers/iio/accel/mma8452.c | 1 + drivers/iio/accel/sca3000.c | 1 - drivers/iio/accel/ssp_accel_sensor.c | 1 - drivers/iio/accel/st_accel.h | 28 +- drivers/iio/accel/st_accel_core.c | 14 +- drivers/iio/accel/st_accel_i2c.c | 5 + drivers/iio/accel/st_accel_spi.c | 5 + drivers/iio/adc/Kconfig | 2 +- drivers/iio/adc/ad7124.c | 86 +++- drivers/iio/adc/ad7192.c | 68 ++- drivers/iio/adc/ad7266.c | 44 +- drivers/iio/adc/ad7280a.c | 2 +- drivers/iio/adc/ad_sigma_delta.c | 143 ++++++- drivers/iio/adc/at91-sama5d2_adc.c | 4 +- drivers/iio/adc/ina2xx-adc.c | 3 +- drivers/iio/adc/palmas_gpadc.c | 3 +- drivers/iio/adc/sc27xx_adc.c | 470 +++++++++++++++++++-- drivers/iio/adc/stm32-dfsdm-adc.c | 5 +- drivers/iio/adc/stmpe-adc.c | 21 +- drivers/iio/adc/ti-ads1015.c | 398 +++++++++-------- drivers/iio/adc/ti-ads8688.c | 1 + drivers/iio/adc/ti_am335x_adc.c | 4 +- drivers/iio/afe/Kconfig | 1 - drivers/iio/afe/iio-rescale.c | 5 +- drivers/iio/buffer/kfifo_buf.c | 10 +- .../common/cros_ec_sensors/cros_ec_sensors_core.c | 5 +- drivers/iio/common/scmi_sensors/scmi_iio.c | 1 - drivers/iio/common/ssp_sensors/ssp_spi.c | 13 +- drivers/iio/common/st_sensors/st_sensors_core.c | 50 ++- drivers/iio/dac/Kconfig | 4 +- drivers/iio/dac/ad5064.c | 2 +- drivers/iio/dac/ad5360.c | 2 +- drivers/iio/dac/ad5380.c | 2 +- drivers/iio/dac/ad5446.c | 2 +- drivers/iio/dac/ad5504.c | 2 +- drivers/iio/dac/ad5624r_spi.c | 2 +- drivers/iio/dac/ad5686.c | 2 +- drivers/iio/dac/ad5755.c | 2 +- drivers/iio/dac/ad5791.c | 2 +- drivers/iio/dac/ad7303.c | 2 +- drivers/iio/dac/ltc2632.c | 8 +- drivers/iio/dac/ltc2688.c | 19 +- drivers/iio/dac/max5821.c | 2 +- drivers/iio/dac/mcp4725.c | 4 +- drivers/iio/dac/stm32-dac.c | 2 +- drivers/iio/dac/ti-dac082s085.c | 2 +- drivers/iio/dac/ti-dac5571.c | 2 +- drivers/iio/dac/ti-dac7311.c | 2 +- drivers/iio/dummy/iio_simple_dummy.c | 20 +- drivers/iio/frequency/ad9523.c | 2 +- drivers/iio/gyro/fxas21002c_core.c | 8 +- drivers/iio/gyro/mpu3050-core.c | 14 +- drivers/iio/gyro/mpu3050-i2c.c | 4 +- drivers/iio/gyro/mpu3050.h | 2 +- drivers/iio/gyro/ssp_gyro_sensor.c | 1 - drivers/iio/gyro/st_gyro_core.c | 15 +- drivers/iio/health/max30100.c | 1 - drivers/iio/health/max30102.c | 1 - drivers/iio/imu/adis16480.c | 91 ++-- drivers/iio/imu/bmi160/bmi160_core.c | 27 +- drivers/iio/imu/bmi160/bmi160_i2c.c | 13 +- drivers/iio/imu/bmi160/bmi160_spi.c | 18 +- drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 1 - drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 1 - drivers/iio/imu/inv_mpu6050/Kconfig | 4 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 + drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 + drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 + drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 5 + drivers/iio/imu/st_lsm6dsx/Kconfig | 6 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 4 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 + drivers/iio/industrialio-buffer.c | 42 +- drivers/iio/industrialio-core.c | 46 +- drivers/iio/industrialio-event.c | 2 +- drivers/iio/industrialio-trigger.c | 2 +- drivers/iio/light/Kconfig | 1 - drivers/iio/light/apds9960.c | 1 - drivers/iio/light/stk3310.c | 25 ++ drivers/iio/light/tsl2772.c | 25 +- drivers/iio/magnetometer/Kconfig | 1 - drivers/iio/magnetometer/rm3100-core.c | 15 +- drivers/iio/magnetometer/st_magn_core.c | 15 +- drivers/iio/multiplexer/Kconfig | 1 - drivers/iio/multiplexer/iio-mux.c | 49 +-- drivers/iio/pressure/st_pressure_core.c | 8 +- drivers/iio/proximity/mb1232.c | 8 +- drivers/iio/proximity/ping.c | 5 +- drivers/iio/proximity/vl53l0x-i2c.c | 7 +- drivers/iio/temperature/ltc2983.c | 236 ++++++----- drivers/iio/temperature/max31856.c | 6 +- drivers/iio/temperature/max31865.c | 4 +- drivers/iio/trigger/iio-trig-sysfs.c | 11 +- drivers/staging/iio/cdc/ad7746.c | 2 +- drivers/staging/iio/impedance-analyzer/ad5933.c | 1 - drivers/staging/iio/resolver/ad2s1210.c | 1 - include/linux/iio/adc/ad_sigma_delta.h | 38 ++ include/linux/iio/common/st_sensors.h | 3 + include/linux/iio/iio-opaque.h | 4 + include/linux/iio/iio.h | 70 ++- include/linux/iio/kfifo_buf.h | 5 +- 122 files changed, 1718 insertions(+), 835 deletions(-)
