[PATCH V3 0/6] iio: accel: bmi088: support BMI085 BMI090L

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Modified the units after application of scale from 100*m/s^2 to m/s^2,
since the units in the ABI documents are m/s^2.
Add supports for the BMI085 accelerometer.
Add supports for the BMI090L accelerometer.
Make it possible to config scales.

Change in V3: 

Use FIELD_GET for checking register range. Reorder the chip info and 
dt-bindings alphabetical. Add of_id_table. Modify the logic of loading
sensor chip info. If the device was found in the table but the device 
tree binding is different, the driver will carry on with the detected
chip with a warning. If no matching device was found, the driver load
the binding chip.


LI Qingwu (6):
  iio: accel: bmi088: Modified the scale calculate
  iio: accel: bmi088: Make it possible to config scales
  iio: accel: bmi088: modified the device name
  iio: accel: bmi088: Add support for bmi085 accel
  iio: accel: bmi088: Add support for bmi090l accel
  dt-bindings: iio: accel: Add bmi085 and bmi090l bindings

 .../bindings/iio/accel/bosch,bmi088.yaml      |  2 +
 drivers/iio/accel/bmi088-accel-core.c         | 96 +++++++++++++++----
 drivers/iio/accel/bmi088-accel-spi.c          | 17 +++-
 drivers/iio/accel/bmi088-accel.h              |  9 +-
 4 files changed, 100 insertions(+), 24 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux