On Wed, 18 May 2022 15:04:19 +0000 LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx> wrote: > Modified the units after application of scale from 100*m/s^2 to m/s^2, > since the units in the ABI documents are m/s^2. > Add supports for the BMI085 accelerometer. > Add supports for the BMI090L accelerometer. > Make it possible to config scales. > > Change in V3: > > Use FIELD_GET for checking register range. Reorder the chip info and > dt-bindings alphabetical. Add of_id_table. Modify the logic of loading > sensor chip info. If the device was found in the table but the device > tree binding is different, the driver will carry on with the detected > chip with a warning. If no matching device was found, the driver load > the binding chip. All looks good to me. Unfortunately we've missed the 5.19 merge window now as it will probably open shortly. As such we have lots of time so I'll leave this on list for a little longer for others to take a look at. Thanks, Jonathan > > > LI Qingwu (6): > iio: accel: bmi088: Modified the scale calculate > iio: accel: bmi088: Make it possible to config scales > iio: accel: bmi088: modified the device name > iio: accel: bmi088: Add support for bmi085 accel > iio: accel: bmi088: Add support for bmi090l accel > dt-bindings: iio: accel: Add bmi085 and bmi090l bindings > > .../bindings/iio/accel/bosch,bmi088.yaml | 2 + > drivers/iio/accel/bmi088-accel-core.c | 96 +++++++++++++++---- > drivers/iio/accel/bmi088-accel-spi.c | 17 +++- > drivers/iio/accel/bmi088-accel.h | 9 +- > 4 files changed, 100 insertions(+), 24 deletions(-) >
