Linux IIO Development

• Thread Index

• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: stm32 trigger: fix sampling_frequency read
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH 3/3] iio: tools: generic_buffer: increase trigger length
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 0/3] iio: adc: sama5d2_adc hw triggers and buffers
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 4th set of new device support, features and cleanups for IIO in the 4.12 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 4th set of new device support, features and cleanups for IIO in the 4.12 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/3] Documentation: dt-bindings: iio: adc: add Meson8 and Meson8b support
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/3] Meson8 / Meson8b support for the meson_saradc driver
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH] iio: proximity: as3935: recalibrate RCO after resume
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PULL] 4th set of new device support, features and cleanups for IIO in the 4.12 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: meter: fix indentation and spacing errors
  • From: Никола Јелић <nikola.jelic83@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PULL] 5th set of IIO fixes for the 4.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: add system-wide suspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: accel: adis16203: fixed a brace coding style issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Enhancements for TI INA219/220 current/voltage monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: add ability to pass kernel headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD and IIO due for the v4.12 merge window
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: meter: fix indentation and spacing errors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: fix as3935_write
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad7303: fix channel description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad7303: fix channel description
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] drivers/staging/iio: braces {} are not necessary for single statement blocks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: proximity: as3935: fix as3935_write
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH] iio: dac: ad7303: fix channel description
  • From: plroskin@xxxxxxxxx
• Re: [PATCH v3 1/2] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: add system-wide suspend
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v13 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 08/10] i2c: i2c-mux-gpmux: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 09/10] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 10/10] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 05/10] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 01/10] devres: trivial whitespace fix
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 07/10] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 06/10] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 04/10] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v13 00/10] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] Staging: iio: accel: adis16203: fixed a brace coding style issue
  • From: René Hickersberger <renehickersberger@xxxxxxx>
• Re: [PATCH v2 1/7] iio: light: rpr0521 disable sensor -bugfix
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: light: apds9960: add system-wide suspend
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] Enhancements for TI INA219/220 current/voltage monitors
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: Fix integration time/averaging for INA219/220
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• [PATCH] tools: iio: add ability to pass kernel headers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD and IIO due for the v4.12 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 5/5] mfd: cros_ec: add RTC as mfd subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 2/5] mfd: cros_ec: Get rid of cros_ec_check_features from cros_ec_dev.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/5] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH] iio: meter: fix indentation and spacing errors
  • From: Nikola Jelic <nikola.jelic83@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 2/5] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 2/2] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 0/2] Add STM32H7 DAC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: light: rpr0521 proximity offset read/write added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: light: rpr0521 sample_frequency read/write added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: light: rpr0521 whitespace fixes
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH] drivers/staging/iio: braces {} are not necessary for single statement blocks
  • From: Pushkar Jambhlekar <pushkar.iit@xxxxxxxxx>
• Re: [PATCH 3/3 v5] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: simplify data ready pin parsing
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v4 1/1] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR)
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v4 0/1] iio:meter:ade7759: use 4-digit octal permissions
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v2] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
• Re: Digital I/O in IIO
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: add max1117/max1118/max1119 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Fixed two style issues in ade7759.c file: * indentation for multi-line arguments in function declarations and calls * permissions converted to octal, instead of or-ed flags
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] iio: dac: stm32: add support for trigger events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: trigger: add set_trigger callback to notify device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:meter:ade7759: realign the rest with opening bracket
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 2/2] iio:meter:ade7759: realign the rest with opening bracket
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v3 1/2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH v3 0/2] iio:meter:ade7759: use 4-digit octal permissions
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: jmondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 3/3 v5] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3 v5] iio: xoadc: augment DT bindings a bit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3 v5] iio: adc: break out common code from SPMI VADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Digital I/O in IIO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: light: rpr0521 magic number to sizeof() on value read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/7] iio: light: rpr0521 channel numbers reordered
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] iio: light: rpr0521 proximity offset read/write added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/7] iio: light: rpr0521 sample_frequency read/write added
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: light: rpr0521 whitespace fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: light: rpr0521 disable sensor -bugfix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hid-sensor-hub: Implement batch mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Fix unbalanced pm_runtime_enable error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonah Petri <jonah@xxxxxxxxx>
• [PATCH v2] iio: hid-sensor-hub: Implement batch mode
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: Raw data block input: is IIO a good choice?
  • From: Jonah Petri <jonah@xxxxxxxxx>
• [PATCH] iio: hid-sensor: Fix unbalanced pm_runtime_enable error
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH] iio: hid-sensor: Store restore poll and hysteresis on S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Raw data block input: is IIO a good choice?
  • From: Pavel Roskin <plroskin@xxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 7/7] iio: light: rpr0521 magic number to sizeof() on value read
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 4/7] iio: light: rpr0521 proximity offset read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 2/7] iio: light: rpr0521 whitespace fixes
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 3/7] iio: light: rpr0521 sample_frequency read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 6/7] iio: light: rpr0521 triggered buffer added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 5/7] iio: light: rpr0521 channel numbers reordered
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/7] iio: light: rpr0521 disable sensor -bugfix
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: light: rpr0521 proximity offset read/write added
  • From: "Koivunen, Mikko" <Mikko.Koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: stm32 trigger: fix sampling_frequency read
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: Digital I/O in IIO
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• [PATCH v2 5/5] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 3/5] iio: trigger: add set_trigger callback to notify device
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/5] Add STM32H7 DAC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 4/5] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/5] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Digital I/O in IIO
  • From: George McCollister <george.mccollister@xxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v5 0/4] iio: adc: Maxim max9611 driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 5/6] iio: light: rpr0521 channel numbers reordered
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 6/6] iio: light: rpr0521 triggered buffer added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 2/6] iio: light: rpr0521 whitespace fixes
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 3/6] iio: light: rpr0521 sample_frequency read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 4/6] iio: light: rpr0521 proximity offset read/write added
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• [PATCH 1/6] iio: light: rpr0521 disable sensor -bugfix
  • From: Mikko Koivunen <mikko.koivunen@xxxxxxxxxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• RE: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 2/7] power: supply: add battery driver for AXP20X and AXP22X PMICs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/7] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 10/38] Annotate hardware config module parameters in drivers/iio/
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH v5 7/7] ARM: sun5i: chip: enable battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 6/7] ARM: dts: sun8i: sina33: enable battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v5 5/7] ARM: dtsi: axp22x: add battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 4/7] ARM: dtsi: axp209: add battery power supply subnode
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/7] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v4 8/8] ARM: sun8i: sina33: add highest OPP of CPUs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v4 5/8] ARM: sun8i: a33: add thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: input: touschcreen: remove sun4i documentation
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/8] ARM: sun8i: a33: add thermal sensor
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] ARM: sun8i: a33: Add devfreq-based GPU cooling
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 8/8] ARM: sun8i: sina33: add highest OPP of CPUs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 4/8] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: input: touschcreen: remove sun4i documentation
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: mfd: add A33 GPADC binding
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/8] add thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 7/8] ARM: sun8i: a33: Add devfreq-based GPU cooling
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 6/8] ARM: sun8i: a33: add CPU thermal throttling
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/7] add support for AXP20X and AXP22X battery power supply driver
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• RE: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
• RE: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] arm64: dts: rockchip: add dts file for RK3328
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 6/6] dt-bindings: document rockchip rk3328-evb board
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 3/6] dt-bindings: soc: rockchip: grf: add support for rk3328
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: break out common code from SPMI VADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3 v5] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v5] iio: adc: break out common code from SPMI VADC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v5] iio: xoadc: augment DT bindings a bit
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 7/7] mfd: cros_ec: add RTC as mfd subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 00/11] add thermal throttling to Allwinner A33 SoC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v4 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v4 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v4 0/2] iio: stm32 trigger: Add quadrature device and counter
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2] iio:meter:ade7759: Removing use of deprecated macros (S_IRUGO, S_IWUSR, S_IXUGO)
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 05/11] Documentation: DT: bindings: input: touschcreen: remove sun4i documentation
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio:meter:ade7759: Removing use of deprecated macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: stm32: add dt option to set resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: stm32-adc: add option to set resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/9] iio: gyro: mpu3050: stop double error reporting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [STABLE REGRESSION] iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
  • From: Ritesh Raj Sarraf <rrs@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] iio: gyro: mpu3050: stop double error reporting
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: stm32-adc: add option to set resolution
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/5] mfd: cros-ec: Fix host command buffer size
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 4/5] rtc: cros-ec: add cros-ec-rtc driver.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 2/5] mfd: cros_ec: Get rid of cros_ec_check_features from cros_ec_dev.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 3/5] mfd: cros_ec: Introduce RTC commands and events definitions.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 5/5] mfd: cros_ec: add RTC as mfd subdevice
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 0/5] mfd: cros-ec: Some fixes and improvements.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 1/5 v3] iio: xoadc: augment DT bindings a bit
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 7/7] mfd: cros_ec: add RTC as mfd subdevice
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] Add support for triggered buffer mode to STM32 ADC
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH v2 2/4] iio: adc: sun4i-gpadc-iio: rename A23/A33-specified registers to contain A23
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 7/7] mfd: cros_ec: add RTC as mfd subdevice
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: cros-ec: Fix host command buffer size
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PULL] Third set of IIO new device support, features and cleanups for the 4.12 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 4th set of IIO fixes for the 4.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 9/9] [media] cx231xx: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 9/9] [media] cx231xx: stop double error reporting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/9] i2c: mux: gpio: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 1/9] i2c: mux: provide more info on failure in i2c_mux_add_adapter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 5/9] i2c: mux: pca954x: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 7/9] i2c: mux: reg: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 4/9] i2c: mux: pca9541: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 9/9] [media] cx231xx: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 6/9] i2c: mux: pinctrl: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 8/9] iio: gyro: mpu3050: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 2/9] i2c: arb: gpio-challenge: stop double error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 0/9] Unify i2c_mux_add_adapter error reporting
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] ARM: sun8i: h3: add support for the thermal sensor in H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PULL] 4th set of IIO fixes for the 4.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] Third set of IIO new device support, features and cleanups for the 4.12 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:meter:ade7759: Removing use of deprecated macros
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-hub: Implement batch mode
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] ARM: sun8i: h3: add support for the thermal sensor in H3
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/4] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 3/4] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH v2 0/4] IIO-based thermal sensor driver for Allwinner H3 SoC
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH v2 4/4] ARM: sun8i: h3: add support for the thermal sensor in H3
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH v2 2/4] iio: adc: sun4i-gpadc-iio: rename A23/A33-specified registers to contain A23
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [PATCH v3] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: dac: stm32: add support for waveform generator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-hub: Implement batch mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hid-sensor-attributes: Fix sensor property setting failure.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] mfd: cros_ec: Get rid of cros_ec_check_features from cros_ec_dev.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sun4i: add THERMAL dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio:accel:adis16029 fixed checkpatch issue - drop braces around single if statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: add max1117/max1118/max1119 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• DMA safe buffers for I2C.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] iio:adc: Driver for Linear Technology LTC2497 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:adc: Driver for Linear Technology LTC2497 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:adc: Driver for Linear Technology LTC2497 ADC
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:adc: Driver for Linear Technology LTC2497 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9832: use 4-digit octal permissions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH] iio: st_pressure: initialize lps22hb bootime
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio:imu:mpu6050 add explicit mpu9250 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:imu:mpu6050 update i2c bindings to reflect i2c-gate and supported parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: replace comma with a semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: meter: Replace mlock with driver private buf_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: iio: rockchip-saradc: add support for rk3328
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: stm32: add dt option to set resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: zpa2326: Remove unnecessary cast on void pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: Remove unnecessary cast on void pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hts221_buffer: Remove unnecessary cast on void pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5504: Remove unnecessary cast on void pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: common: ms_sensors: Remove unnecessary cast on void pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Remove unnecessary cast on void pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: frequency: Remove useless type conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: light: Remove useless type conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: accel: Remove useless type conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: gyro: adis16060: Change the name of function.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: lm3533-als: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] iio: pressure: zpa2326: Remove unnecessary cast on void pointer
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: Remove unnecessary cast on void pointer
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: humidity: hts221_buffer: Remove unnecessary cast on void pointer
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: dac: ad5504: Remove unnecessary cast on void pointer
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: common: ms_sensors: Remove unnecessary cast on void pointer
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: adc: Remove unnecessary cast on void pointer
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] Documentation: dt-bindings: Document bindings for Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: light: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: hx711: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: hdc100x: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: bh1750: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: as3935: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: replace comma with a semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: proximity: as3935: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: light: bh1750: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: light: apds9960: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: humidity: hdc100x: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: adc: hx711: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] staging: iio: light: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Xo Wang <xow@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH 0/3] iio: health: Clean up
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 3/3] iio: health: afe4403: Remove all unused functions
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 2/3] iio: health: afe4404: Remove all unused functions
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 1/3] iio: health: afe440x: Remove code in comments
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 0/3] iio: health: Clean up
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 0/3] staging: iio: Remove useless type conversion
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 3/3] staging: iio: light: Remove useless type conversion
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 2/3] staging: iio: frequency: Remove useless type conversion
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 1/3] staging: iio: accel: Remove useless type conversion
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: stm32-adc: add option to set resolution
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/2] iio: adc: stm32: add dt option to set resolution
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/2] iio: allow to set STM32 ADC resolution
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/4] dt-bindings: iio: stm32-dac: Add support for STM32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/4] iio: dac: add support for stm32 DAC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 3/4] iio: dac: stm32: add support for trigger events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 4/4] iio: dac: stm32: add support for waveform generator
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/4] Add STM32H7 DAC driver
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2] iio: gyro: adis16060: Change the name of function.
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: gyro: adis16060: Change the function's name
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] staging: iio: meter: Replace mlock with driver private buf_lock
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• Re: [PATCH 2/2] iio:imu:mpu6050 add explicit mpu9250 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:imu:mpu6050 update i2c bindings to reflect i2c-gate and supported parts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: dt-bindings: add a Meson8b compatible to the SAR ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: ade7753: Replace mlock with driver private lock
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: ade7753: Replace mlock with driver private lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: gyro: adis16060: Change the function's name
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: ade7753: Replace mlock with driver private lock
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• [PATCH v2] iio: light: lm3533-als: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [RFC/PATCH v3] staging: iio: update locking method during frequency writes
  • From: Gargi Sharma <gs051095@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: ade7753: Replace mlock with driver private lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC/PATCH v3] staging: iio: update locking method during frequency writes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC/PATCH v3] staging: iio: update locking method during frequency writes
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [RFC/PATCH v3] staging: iio: update locking method during frequency writes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] iio: adc: replace comma with a semicolon
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [PATCH] drivers: iio: replace comma with a semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: replace comma with a semicolon
  • From: jacopo <jacopo@xxxxxxxxxx>
• Re: [PATCH] iio: adc: replace comma with a semicolon
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [RESEND PATCH] iio: st_pressure: initialize lps22hb bootime
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• iio: st_pressure: initialize lps22hb bootime
  • From: Shrirang Bagul <shrirang.bagul@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/6] initialize dtsi file and dts file for RK3328 SoCs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: replace comma with a semicolon
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio: adc: replace comma with a semicolon
  • From: jacopo <jacopo@xxxxxxxxxx>
• [PATCH] iio: adc: replace comma with a semicolon
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• [PATCH] drivers: iio: replace comma with a semicolon
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• [PATCH] staging: iio: ad9832: use 4-digit octal permissions
  • From: Guru Das Srinagesh <gurooodas@xxxxxxxxx>
• [RFC/PATCH v3] staging: iio: update locking method during frequency writes
  • From: Gargi Sharma <gs051095@xxxxxxxxx>
• Re: [PATCH] iio:meter:ade7759: Removing use of deprecated macros
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [RFC v2] staging: iio: update locking method during frequency writes
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/5 v3] iio: xoadc: augment DT bindings a bit
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v12 00/10] mux controller abstraction and iio/i2c muxes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5 v3] iio: xoadc: augment DT bindings a bit
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v12 00/10] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC v2] staging: iio: update locking method during frequency writes
  • From: Gargi Sharma <gs051095@xxxxxxxxx>
• [PATCH] iio:meter:ade7759: Removing use of deprecated macros
  • From: Chen Guanqiao <chen.chenchacha@xxxxxxxxxxx>
• [PATCH] staging:iio:accel:adis16029 fixed checkpatch issue - drop braces around single if statement
  • From: Andrea della Porta <sfaragnaus@xxxxxxxxx>
• [PATCH] iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad799x: constify attribute_group structures
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad799x: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1363: constify attribute_group structures
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH] iio: dac: ad5504: constify attribute_group structures
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad799x: constify attribute_group structures
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [Outreachy kernel] Re: [PATCH] iio: adc: max1363: constify attribute_group structures
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] staging: iio: update locking method during frequency writes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] coding style issue resolved
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC] staging: iio: ad7759: Replace mlock with driver private buf_lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1363: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad799x: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5504: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: lm3533-als: constify attribute_group structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v2] staging: iio: Remove unneeded parentheses.
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [Outreachy kernel] [PATCH 0/4] drivers: iio: Replace ternary operator with min macro
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH 1/4] iio: common: st_sensors: Replace ternary operator with min macro
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: Remove unneeded parentheses.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [Outreachy kernel] [RESEND PATCH] staging: iio: Remove extra Parenthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH 1/4] iio: common: st_sensors: Replace ternary operator with min macro
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v2] staging: iio: Remove unneeded parentheses.
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] iio: accel: bma180: Set up buffer timestamps for non-zero values
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [Outreachy kernel] [RESEND PATCH] staging: iio: Remove extra Parenthesis
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [RESEND PATCH] staging: iio: Remove extra Parenthesis
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] iio: accel: bma180: Set up buffer timestamps for non-zero values
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH 4/4] iio: light: si1145: Replace ternary operator with min macro
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH 4/4] iio: light: si1145: Replace ternary operator with min macro
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: accel: bma180: Set up buffer timestamps for non-zero values
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH 4/4] iio: light: si1145: Replace ternary operator with min macro
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 10/11] ASoC: add bindings for stm32 DFSDM filter
  • From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
• Re: [Outreachy kernel] [PATCH 4/4] iio: light: si1145: Replace ternary operator with min macro
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH 1/4] iio: common: st_sensors: Replace ternary operator with min macro
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 2/4] iio: imu: st_lsm6dsx: Replace ternary operator with min macro
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 4/4] iio: light: si1145: Replace ternary operator with min macro
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 3/4] iio: imu: st_lsm6dsx: Replace ternary operator with min macro
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH 0/4] drivers: iio: Replace ternary operator with min macro
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [RFC PATCH 2/3] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v3] iio:adc: Driver for Linear Technology LTC2497 ADC
  • From: <michael.hennerich@xxxxxxxxxx>
• Re: [PATCH] iio/adc/ltc2497: Driver for Linear Technology LTC2497 ADC
  • From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
• Re: [PATCH v3 05/11] Documentation: DT: bindings: input: touschcreen: remove sun4i documentation
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: Use devm functions
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH] staging: iio: Use devm functions
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: Aspeed ADC
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v5 1/2] Documentation: dt-bindings: Document bindings for Aspeed ADC
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2 1/2] Documentation: dt-bindings: Document bindings for Aspeed AST2400/AST2500 ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 04/11] Documentation: DT: bindings: mfd: add A33 GPADC binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: hid-sensor-hub: Implement batch mode
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• [PATCH v5 1/2] Documentation: dt-bindings: Document bindings for Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• [PATCH] iio: light: lm3533-als: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: dac: ad5504: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: adc: max1363: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• [PATCH] iio: adc: ad799x: constify attribute_group structures
  • From: simran singhal <singhalsimran0@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: ade7753: Replace mlock with driver private lock
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [RFC PATCH 0/3] IIO-based thermal sensor driver for Allwinner H3 SoC
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 3/3] ARM: sun8i: h3: add support for the thermal sensor in H3
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 2/3] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 1/3] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC] staging: iio: ad7759: Replace mlock with driver private buf_lock
  • From: Arushi Singhal <arushisinghal19971997@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: ade7753: Replace mlock with driver private lock
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• [PATCH v2] iio: adc: add max1117/max1118/max1119 ADC driver
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH] coding style issue resolved
  • From: Andrea della Porta <sfaragnaus@xxxxxxxxx>
• [PATCH] iio: adc: sun4i: add THERMAL dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 06/11] IIO: ADC: add stm32 DFSDM support for PDM microphone
  • From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
• [PATCH v2] iio: hid-sensor-attributes: Fix sensor property setting failure.
  • From: Song Hongyan <hongyan.song@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Rick Altherr <raltherr@xxxxxxxxxx>
• [PATCH v2] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 1/5 v2] iio: xoadc: augment DT bindings a bit
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC PATCH] iio: hid-sensor-hub: Implement batch mode
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v4 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v4 0/4] iio: adc: Maxim max9611 driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v4 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH v4 1/4] Documentation: dt-bindings: iio: Add max9611 ADC
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v11 11/12] iio: multiplexer: fix unsigned check with less than zero
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v12 01/10] devres: trivial whitespace fix
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v12 04/10] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 10/10] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 08/10] i2c: i2c-mux-gpmux: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 09/10] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 03/10] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 07/10] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 06/10] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 05/10] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 00/10] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v11 11/12] iio: multiplexer: fix unsigned check with less than zero
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v11 11/12] iio: multiplexer: fix unsigned check with less than zero
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: iio: rockchip-saradc: add support for rk3328
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v11 11/12] iio: multiplexer: fix unsigned check with less than zero
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 4/7] mfd: cros_ec: Get rid of cros_ec_check_features from cros_ec_dev.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v11 04/12] iio: inkern: api for manipulating ext_info of iio channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 08/12] i2c: i2c-mux-gpmux: new driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 12/12] mux: core: fix error handling in devm_mux_chip_alloc
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 11/12] iio: multiplexer: fix unsigned check with less than zero
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 10/12] mux: adg792a: add mux controller driver for ADG792A/G
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 09/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 06/12] iio: multiplexer: new iio category and iio-mux driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 03/12] mux: minimal mux subsystem and gpio-based mux controller
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 05/12] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 07/12] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 02/12] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 01/12] devres: trivial whitespace fix
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v11 00/12] mux controller abstraction and iio/i2c muxes
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 08/11] ASoC: Add bindings for DMIC codec driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] IIO: bmp280-core.c: fix error in humidity calculation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 0/2] iio: stm32 trigger: Add quadrature device and counter
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v4 6/6] dt-bindings: document rockchip rk3328-evb board
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v3 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH v4 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v4 0/6] initialize dtsi file and dts file for RK3328 SoCs
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v4 3/6] dt-bindings: soc: rockchip: grf: add support for rk3328
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: iio: rockchip-saradc: add support for rk3328
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: rockchip: add dts file for RK3328
  • From: <cl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] iio: adc: Maxim max9611 driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: jacopo <jacopo@xxxxxxxxxx>
• [PATCH 1/5 v2] iio: xoadc: augment DT bindings a bit
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: xoadc: augment DT bindings a bit
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Problem in loading module of Software trigger
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v2] iio:adc: Driver for Linear Technology LTC2497 ADC
  • From: <michael.hennerich@xxxxxxxxxx>
• Re: Problem in loading module of Software trigger
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• [PATCH 2/2] iio:imu:mpu6050 add explicit mpu9250 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] iio:imu:mpu6050 update bindings and add mpu9250 support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio:imu:mpu6050 update i2c bindings to reflect i2c-gate and supported parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: jacopo <jacopo@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: jacopo <jacopo@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: jacopo <jacopo@xxxxxxxxxx>
• Re: [PATCH v3 0/4] iio: adc: Maxim max9611 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] iio: adc: Maxim max9611 driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: salvator-x: Add current sense amplifiers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Problem in loading module of Software trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Problem in loading module of Software trigger
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH 1/5] iio: xoadc: augment DT bindings a bit
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: [PATCH v2 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Michael Welling <mwelling@xxxxxxxx>
• [RFC] staging: iio: update locking method during frequency writes
  • From: Gargi Sharma <gs051095@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: stm32 trigger: Add counter enable modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: stm32 trigger: Add quadrature encoder device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9] staging: iio: adis16060: Remove iio_dev mlock and refactor code
  • From: SIMRAN SINGHAL <singhalsimran0@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv3] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: Protect DIRECT mode using claim/release helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-attributes: Fix sensor property setting failure.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 07/11] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9] staging: iio: adis16060: Remove iio_dev mlock and refactor code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: Aspeed ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: jacopo <jacopo@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: Aspeed AST2400/AST2500 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: Aspeed AST2400/AST2500 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7280a: fix permission coding style issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: accel: remove unneeded braces around single statements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] iio: hid-sensor-hub: Implement batch mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] staging: iio: tsl2x7x_core: Fix standard deviation calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: do not apply ODR configuration in write_raw handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: adc: Add Maxim max9611 ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: Documentation: Add max9611 sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmg160: reset chip when probing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: hid: Add humidity sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/2] Documentation: dt-bindings: add a Meson8b compatible to the SAR ADC
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/2] Meson8b support for the meson_saradc driver
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>