No code change only formatting.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 42 ++++------
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 118 ++++++++++++++---------------
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 6 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 2 -
5 files changed, 79 insertions(+), 94 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 3af5877..5290e59 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -272,6 +272,7 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
result = inv_mpu6050_set_power_itg(st, true);
if (result)
return result;
+
d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
result = regmap_write(st->map, st->reg->gyro_config, d);
if (result)
@@ -331,12 +332,11 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
return IIO_VAL_INT;
}
-static int
-inv_mpu6050_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
+static int inv_mpu6050_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
{
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
int ret = 0;
switch (mask) {
@@ -405,19 +405,16 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
*val = 0;
*val2 = gyro_scale_6050[st->chip_config.fsr];
mutex_unlock(&st->lock);
-
return IIO_VAL_INT_PLUS_NANO;
case IIO_ACCEL:
mutex_lock(&st->lock);
*val = 0;
*val2 = accel_scale[st->chip_config.accl_fs];
mutex_unlock(&st->lock);
-
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = 0;
*val2 = INV_MPU6050_TEMP_SCALE;
-
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
@@ -426,7 +423,6 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
switch (chan->type) {
case IIO_TEMP:
*val = INV_MPU6050_TEMP_OFFSET;
-
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -445,7 +441,6 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
chan->channel2, val);
mutex_unlock(&st->lock);
return IIO_VAL_INT;
-
default:
return -EINVAL;
}
@@ -465,7 +460,6 @@ static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val)
result = regmap_write(st->map, st->reg->gyro_config, d);
if (result)
return result;
-
st->chip_config.fsr = i;
return 0;
}
@@ -503,7 +497,6 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
result = regmap_write(st->map, st->reg->accl_config, d);
if (result)
return result;
-
st->chip_config.accl_fs = i;
return 0;
}
@@ -610,9 +603,9 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
/**
* inv_mpu6050_fifo_rate_store() - Set fifo rate.
*/
-static ssize_t
-inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
s32 fifo_rate;
u8 d;
@@ -663,9 +656,8 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
/**
* inv_fifo_rate_show() - Get the current sampling rate.
*/
-static ssize_t
-inv_fifo_rate_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t inv_fifo_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
unsigned fifo_rate;
@@ -700,7 +692,6 @@ static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr,
case ATTR_GYRO_MATRIX:
case ATTR_ACCL_MATRIX:
m = st->plat_data.orientation;
-
return scnprintf(buf, PAGE_SIZE,
"%d, %d, %d; %d, %d, %d; %d, %d, %d\n",
m[0], m[1], m[2], m[3], m[4], m[5], m[6], m[7], m[8]);
@@ -785,17 +776,17 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev,
/* constant IIO attribute */
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 20 50 100 200 500");
static IIO_CONST_ATTR(in_anglvel_scale_available,
- "0.000133090 0.000266181 0.000532362 0.001064724");
+ "0.000133090 0.000266181 0.000532362 0.001064724");
static IIO_CONST_ATTR(in_accel_scale_available,
- "0.000598 0.001196 0.002392 0.004785");
+ "0.000598 0.001196 0.002392 0.004785");
static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show,
- inv_mpu6050_fifo_rate_store);
+ inv_mpu6050_fifo_rate_store);
/* Deprecated: kept for userspace backward compatibility. */
static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL,
- ATTR_GYRO_MATRIX);
+ ATTR_GYRO_MATRIX);
static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL,
- ATTR_ACCL_MATRIX);
+ ATTR_ACCL_MATRIX);
static struct attribute *inv_attributes[] = {
&iio_dev_attr_in_gyro_matrix.dev_attr.attr, /* deprecated */
@@ -829,7 +820,7 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
unsigned int regval;
int i;
- st->hw = &hw_info[st->chip_type];
+ st->hw = &hw_info[st->chip_type];
st->reg = hw_info[st->chip_type].reg;
/* check chip self-identification */
@@ -983,7 +974,6 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
EXPORT_SYMBOL_GPL(inv_mpu_core_probe);
#ifdef CONFIG_PM_SLEEP
-
static int inv_mpu_resume(struct device *dev)
{
struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index d18604b..bbb1cdf 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -50,7 +50,7 @@ static int inv_mpu6050_deselect_bypass(struct i2c_mux_core *muxc, u32 chan_id)
struct inv_mpu6050_state *st = iio_priv(indio_dev);
mutex_lock(&st->lock);
- /* It doesn't really mattter, if any of the calls fails */
+ /* It doesn't really matter, if any of the calls fails */
regmap_write(st->map, st->reg->int_pin_cfg, INV_MPU6050_INT_PIN_CFG);
inv_mpu6050_set_power_itg(st, false);
mutex_unlock(&st->lock);
@@ -166,7 +166,6 @@ static int inv_mpu_remove(struct i2c_client *client)
{"icm20608", INV_ICM20608},
{}
};
-
MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
static const struct of_device_id inv_of_match[] = {
@@ -198,7 +197,6 @@ static int inv_mpu_remove(struct i2c_client *client)
{"INVN6500", INV_MPU6500},
{ },
};
-
MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
static struct i2c_driver inv_mpu_driver = {
@@ -212,7 +210,6 @@ static int inv_mpu_remove(struct i2c_client *client)
.pm = &inv_mpu_pmops,
},
};
-
module_i2c_driver(inv_mpu_driver);
MODULE_AUTHOR("Invensense Corporation");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index f680d00..b677172 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -129,11 +129,11 @@ struct inv_mpu6050_hw {
struct inv_mpu6050_state {
#define TIMESTAMP_FIFO_SIZE 16
struct mutex lock;
- struct iio_trigger *trig;
+ struct iio_trigger *trig;
struct inv_mpu6050_chip_config chip_config;
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_hw *hw;
- enum inv_devices chip_type;
+ enum inv_devices chip_type;
spinlock_t time_stamp_lock;
struct i2c_mux_core *muxc;
struct i2c_client *mux_client;
@@ -146,84 +146,84 @@ struct inv_mpu6050_state {
};
/*register and associated bit definition*/
-#define INV_MPU6050_REG_ACCEL_OFFSET 0x06
-#define INV_MPU6050_REG_GYRO_OFFSET 0x13
+#define INV_MPU6050_REG_ACCEL_OFFSET 0x06
+#define INV_MPU6050_REG_GYRO_OFFSET 0x13
-#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
-#define INV_MPU6050_REG_CONFIG 0x1A
-#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
-#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
+#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
+#define INV_MPU6050_REG_CONFIG 0x1A
+#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
+#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
-#define INV_MPU6050_REG_FIFO_EN 0x23
-#define INV_MPU6050_BIT_ACCEL_OUT 0x08
-#define INV_MPU6050_BITS_GYRO_OUT 0x70
+#define INV_MPU6050_REG_FIFO_EN 0x23
+#define INV_MPU6050_BIT_ACCEL_OUT 0x08
+#define INV_MPU6050_BITS_GYRO_OUT 0x70
-#define INV_MPU6050_REG_INT_ENABLE 0x38
-#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
-#define INV_MPU6050_BIT_DMP_INT_EN 0x02
+#define INV_MPU6050_REG_INT_ENABLE 0x38
+#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
+#define INV_MPU6050_BIT_DMP_INT_EN 0x02
-#define INV_MPU6050_REG_RAW_ACCEL 0x3B
-#define INV_MPU6050_REG_TEMPERATURE 0x41
-#define INV_MPU6050_REG_RAW_GYRO 0x43
+#define INV_MPU6050_REG_RAW_ACCEL 0x3B
+#define INV_MPU6050_REG_TEMPERATURE 0x41
+#define INV_MPU6050_REG_RAW_GYRO 0x43
-#define INV_MPU6050_REG_USER_CTRL 0x6A
-#define INV_MPU6050_BIT_FIFO_RST 0x04
-#define INV_MPU6050_BIT_DMP_RST 0x08
-#define INV_MPU6050_BIT_I2C_MST_EN 0x20
-#define INV_MPU6050_BIT_FIFO_EN 0x40
-#define INV_MPU6050_BIT_DMP_EN 0x80
-#define INV_MPU6050_BIT_I2C_IF_DIS 0x10
+#define INV_MPU6050_REG_USER_CTRL 0x6A
+#define INV_MPU6050_BIT_FIFO_RST 0x04
+#define INV_MPU6050_BIT_DMP_RST 0x08
+#define INV_MPU6050_BIT_I2C_MST_EN 0x20
+#define INV_MPU6050_BIT_FIFO_EN 0x40
+#define INV_MPU6050_BIT_DMP_EN 0x80
+#define INV_MPU6050_BIT_I2C_IF_DIS 0x10
-#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
-#define INV_MPU6050_BIT_H_RESET 0x80
-#define INV_MPU6050_BIT_SLEEP 0x40
-#define INV_MPU6050_BIT_CLK_MASK 0x7
+#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
+#define INV_MPU6050_BIT_H_RESET 0x80
+#define INV_MPU6050_BIT_SLEEP 0x40
+#define INV_MPU6050_BIT_CLK_MASK 0x7
-#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
-#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
-#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
+#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
+#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
-#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
-#define INV_MPU6050_REG_FIFO_R_W 0x74
+#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
+#define INV_MPU6050_REG_FIFO_R_W 0x74
-#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
-#define INV_MPU6050_FIFO_COUNT_BYTE 2
-#define INV_MPU6050_FIFO_THRESHOLD 500
+#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
+#define INV_MPU6050_FIFO_COUNT_BYTE 2
+#define INV_MPU6050_FIFO_THRESHOLD 500
/* mpu6500 registers */
-#define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D
-#define INV_MPU6500_REG_ACCEL_OFFSET 0x77
+#define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D
+#define INV_MPU6500_REG_ACCEL_OFFSET 0x77
/* delay time in milliseconds */
-#define INV_MPU6050_POWER_UP_TIME 100
-#define INV_MPU6050_TEMP_UP_TIME 100
-#define INV_MPU6050_SENSOR_UP_TIME 30
+#define INV_MPU6050_POWER_UP_TIME 100
+#define INV_MPU6050_TEMP_UP_TIME 100
+#define INV_MPU6050_SENSOR_UP_TIME 30
/* delay time in microseconds */
-#define INV_MPU6050_REG_UP_TIME_MIN 5000
-#define INV_MPU6050_REG_UP_TIME_MAX 10000
+#define INV_MPU6050_REG_UP_TIME_MIN 5000
+#define INV_MPU6050_REG_UP_TIME_MAX 10000
-#define INV_MPU6050_TEMP_OFFSET 12421
-#define INV_MPU6050_TEMP_SCALE 2941
-#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
-#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
-#define INV_MPU6050_THREE_AXIS 3
-#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
-#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
+#define INV_MPU6050_TEMP_OFFSET 12421
+#define INV_MPU6050_TEMP_SCALE 2941
+#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
+#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
+#define INV_MPU6050_THREE_AXIS 3
+#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
+#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
/* 6 + 6 round up and plus 8 */
-#define INV_MPU6050_OUTPUT_DATA_SIZE 24
+#define INV_MPU6050_OUTPUT_DATA_SIZE 24
-#define INV_MPU6050_REG_INT_PIN_CFG 0x37
-#define INV_MPU6050_BIT_BYPASS_EN 0x2
-#define INV_MPU6050_INT_PIN_CFG 0
+#define INV_MPU6050_REG_INT_PIN_CFG 0x37
+#define INV_MPU6050_BIT_BYPASS_EN 0x2
+#define INV_MPU6050_INT_PIN_CFG 0
/* init parameters */
-#define INV_MPU6050_INIT_FIFO_RATE 50
-#define INV_MPU6050_TIME_STAMP_TOR 5
-#define INV_MPU6050_MAX_FIFO_RATE 1000
-#define INV_MPU6050_MIN_FIFO_RATE 4
-#define INV_MPU6050_ONE_K_HZ 1000
+#define INV_MPU6050_INIT_FIFO_RATE 50
+#define INV_MPU6050_TIME_STAMP_TOR 5
+#define INV_MPU6050_MAX_FIFO_RATE 1000
+#define INV_MPU6050_MIN_FIFO_RATE 4
+#define INV_MPU6050_ONE_K_HZ 1000
#define INV_MPU6050_REG_WHOAMI 117
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index ff81c6a..f5c2e07 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -55,7 +55,7 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
if (result)
goto reset_fifo_fail;
- /* reset FIFO*/
+ /* reset FIFO */
result = regmap_write(st->map, st->reg->user_ctrl,
INV_MPU6050_BIT_FIFO_RST);
if (result)
@@ -72,7 +72,7 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
if (result)
return result;
}
- /* enable FIFO reading and I2C master interface*/
+ /* enable FIFO reading and I2C master interface */
result = regmap_write(st->map, st->reg->user_ctrl,
INV_MPU6050_BIT_FIFO_EN);
if (result)
@@ -150,7 +150,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
fifo_count = be16_to_cpup((__be16 *)(&data[0]));
if (fifo_count < bytes_per_datum)
goto end_session;
- /* fifo count can't be odd number, if it is odd, reset fifo*/
+ /* fifo count can't be odd number, if it is odd, reset fifo */
if (fifo_count & 1)
goto flush_fifo;
if (fifo_count > INV_MPU6050_FIFO_THRESHOLD)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 93fdd17..cc43cb1 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -81,7 +81,6 @@ static int inv_mpu_probe(struct spi_device *spi)
{"icm20608", INV_ICM20608},
{}
};
-
MODULE_DEVICE_TABLE(spi, inv_mpu_id);
static const struct acpi_device_id inv_acpi_match[] = {
@@ -99,7 +98,6 @@ static int inv_mpu_probe(struct spi_device *spi)
.pm = &inv_mpu_pmops,
},
};
-
module_spi_driver(inv_mpu_driver);
MODULE_AUTHOR("Adriana Reus <adriana.reus@xxxxxxxxx>");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
