Linux IIO (Industrial I/O) Development

• Date Index

• [PATCH v4 0/3] ECAP support on TI AM62x SoC, Julien Panis
  • [PATCH v4 1/3] dt-binding: counter: add ti,am62-ecap-capture.yaml, Julien Panis
    • Re: [PATCH v4 1/3] dt-binding: counter: add ti,am62-ecap-capture.yaml, Krzysztof Kozlowski
  • [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, Julien Panis
    • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, Jonathan Cameron
    • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, William Breathitt Gray
      • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, William Breathitt Gray
        • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, Julien Panis
          • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, William Breathitt Gray
      • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, Julien Panis
        • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, William Breathitt Gray
          • Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP, Julien Panis
  • [PATCH v4 2/3] Documentation: ABI: add sysfs-bus-counter-ecap, Julien Panis
    • Re: [PATCH v4 2/3] Documentation: ABI: add sysfs-bus-counter-ecap, William Breathitt Gray
  • Re: [PATCH v4 0/3] ECAP support on TI AM62x SoC, William Breathitt Gray
    • Re: [PATCH v4 0/3] ECAP support on TI AM62x SoC, Julien Panis
    • Re: [PATCH v4 0/3] ECAP support on TI AM62x SoC, Julien Panis
• [RFC PATCH 0/7] Devm helpers for regulator get and enable, Matti Vaittinen
  • [RFC PATCH 7/7] adc: ad7192: simplify using devm_regulator_get_enable(), Matti Vaittinen
• [PATCH v4 0/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt, Eddie James
  • [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Eddie James
    • Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Andy Shevchenko
      • Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Eddie James
        • Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Andy Shevchenko
          • Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Jonathan Cameron
            • Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Eddie James
              • Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure, Jonathan Cameron
  • [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt, Eddie James
    • Re: [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt, Andy Shevchenko
      • Re: [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt, Eddie James
        • Re: [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt, Jonathan Cameron
• [PATCH v2 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup, Krzysztof Kozlowski
  • [PATCH v2 1/5] dt-bindings: iio: Drop Joachim Eastwood, Krzysztof Kozlowski
  • [PATCH v2 2/5] dt-bindings: iio: Drop Bogdan Pricop, Krzysztof Kozlowski
  • [PATCH v2 3/5] dt-bindings: Drop Beniamin Bia and Stefan Popa, Krzysztof Kozlowski
  • [PATCH v2 4/5] dt-bindings: Drop Robert Jones, Krzysztof Kozlowski
    • Re: [PATCH v2 4/5] dt-bindings: Drop Robert Jones, Lee Jones
      • Re: [PATCH v2 4/5] dt-bindings: Drop Robert Jones, Krzysztof Kozlowski
        • Re: [PATCH v2 4/5] dt-bindings: Drop Robert Jones, Lee Jones
  • [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos, Krzysztof Kozlowski
    • Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos, Andrew Davis
    • Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos, Jonathan Cameron
    • Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos, Mark Brown
    • Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos, Sebastian Reichel
  • Re: [PATCH v2 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup, Rob Herring
• [PATCH v5 0/9] Improve MCP3911 driver, Marcus Folkesson
  • [PATCH v5 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property, Marcus Folkesson
  • [PATCH v5 1/9] iio: adc: mcp3911: make use of the sign bit, Marcus Folkesson
  • [PATCH v5 3/9] iio: adc: mcp3911: use correct formula for AD conversion, Marcus Folkesson
  • [PATCH v5 5/9] iio: adc: mcp3911: add support for buffers, Marcus Folkesson
    • Re: [PATCH v5 5/9] iio: adc: mcp3911: add support for buffers, Andy Shevchenko
    • Re: [PATCH v5 5/9] iio: adc: mcp3911: add support for buffers, Jonathan Cameron
  • [PATCH v5 8/9] iio: adc: mcp3911: add support for oversampling ratio, Marcus Folkesson
  • [PATCH v5 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Marcus Folkesson
    • Re: [PATCH v5 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Andy Shevchenko
      • Re: [PATCH v5 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Marcus Folkesson
  • [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Marcus Folkesson
    • Re: [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Andy Shevchenko
      • Re: [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Andy Shevchenko
        • Re: [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Jonathan Cameron
  • [PATCH v5 6/9] iio: adc: mcp3911: add support for interrupts, Marcus Folkesson
  • [PATCH v5 9/9] iio: adc: mcp3911: add support to set PGA, Marcus Folkesson
  • Re: [PATCH v5 0/9] Improve MCP3911 driver, Jonathan Cameron
• [PATCH 01/13] iio: adc: ad7124: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 04/13] iio: adc: ad9467: Benefit from devm_clk_get_prepared() to simplify, Uwe Kleine-König
    • Re: [PATCH 04/13] iio: adc: ad9467: Benefit from devm_clk_get_prepared() to simplify, Andy Shevchenko
      • Re: [PATCH 04/13] iio: adc: ingenic-adc: Benefit from devm_clk_get_prepared() to simplify, Uwe Kleine-König
        • Re: [PATCH 04/13] iio: adc: ingenic-adc: Benefit from devm_clk_get_prepared() to simplify, Jonathan Cameron
  • [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
    • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Jonathan Cameron
      • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Andy Shevchenko
        • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
          • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Andy Shevchenko
            • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
              • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Andy Shevchenko
                • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Lars-Peter Clausen
                  • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Lars-Peter Clausen
                    • Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify, Jonathan Cameron
  • [PATCH 09/13] iio: adc: xilinx-xadc: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 05/13] iio: adc: lpc18xx: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
    • Re: [PATCH 05/13] iio: adc: lpc18xx: Benefit from devm_clk_get_enabled() to simplify, Jonathan Cameron
  • [PATCH 10/13] iio: frequency: adf4371: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 03/13] iio: adc: ad9467: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 08/13] iio: adc: xilinx-ams: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 13/13] iio: imu: adis16475: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 07/13] iio: adc: ti-ads131e08: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 02/13] iio: adc: ad7768-1: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 12/13] iio: frequency: adrf6780: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
  • [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify, Uwe Kleine-König
    • Re: [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify, Jonathan Cameron
      • Re: [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify, Andy Shevchenko
        • Re: [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify, Jonathan Cameron
  • Re: [PATCH 01/13] iio: adc: ad7124: Benefit from devm_clk_get_enabled() to simplify, Jonathan Cameron
• [PATCH v3 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation, Crt Mori
• [PATCH v3 1/2] iio: temperature: mlx90632 Add supply regulator to sensor, Crt Mori
• [PATCH v3 0/2] iio: temperature: mlx90632: Add supply regulator, Crt Mori
  • Re: [PATCH v3 0/2] iio: temperature: mlx90632: Add supply regulator, Jonathan Cameron
• [PATCH v2 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation, Crt Mori
• [PATCH v2 1/2] iio: temperature: mlx90632 Add supply regulator to sensor, Crt Mori
• [PATCH v2 0/2] iio: temperature: mlx90632: Add supply regulator, Crt Mori
• [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup, Krzysztof Kozlowski
  • [PATCH 1/5] dt-bindings: iio: Drop Joachim Eastwood, Krzysztof Kozlowski
    • Re: [PATCH 1/5] dt-bindings: iio: Drop Joachim Eastwood, Jonathan Cameron
  • [PATCH 3/5] dt-bindings: Drop Beniamin Bia and Stefan Popa, Krzysztof Kozlowski
    • Re: [PATCH 3/5] dt-bindings: Drop Beniamin Bia and Stefan Popa, Jonathan Cameron
  • [PATCH 4/5] dt-bindings: Drop Robert Jones, Krzysztof Kozlowski
    • Re: [PATCH 4/5] dt-bindings: Drop Robert Jones, Jonathan Cameron
  • [PATCH 2/5] dt-bindings: iio: Drop Bogdan Pricop, Krzysztof Kozlowski
    • Re: [PATCH 2/5] dt-bindings: iio: Drop Bogdan Pricop, Jonathan Cameron
  • [PATCH 5/5] dt-bindings: Drop Dan Murphy, Krzysztof Kozlowski
    • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Krzysztof Kozlowski
      • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Andrew Davis
        • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Andrew Lunn
          • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Andrew Davis
            • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Andrew Lunn
        • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Krzysztof Kozlowski
    • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Jonathan Cameron
    • Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy, Jakub Kicinski
  • Re: [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup, Jakub Kicinski
    • Re: [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup, Krzysztof Kozlowski
      • Re: [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup, Jakub Kicinski
• [PATCH] iio: Make use of devm_clk_get_enabled(), Uwe Kleine-König
  • Re: [PATCH] iio: Make use of devm_clk_get_enabled(), Andy Shevchenko
• [PATCH v5 00/14] Add support for magnetometer Yamaha YAS537, Jakob Hauser
  • [PATCH v5 01/14] iio: magnetometer: yas530: Change data type of hard_offsets to signed, Jakob Hauser
  • [PATCH v5 03/14] iio: magnetometer: yas530: Correct scaling of magnetic axes, Jakob Hauser
  • [PATCH v5 02/14] iio: magnetometer: yas530: Change range of data in volatile register, Jakob Hauser
  • [PATCH v5 04/14] iio: magnetometer: yas530: Correct temperature handling, Jakob Hauser
  • [PATCH v5 05/14] iio: magnetometer: yas530: Change data type of calibration coefficients, Jakob Hauser
  • [PATCH v5 06/14] iio: magnetometer: yas530: Rename functions and registers, Jakob Hauser
    • Re: [PATCH v5 06/14] iio: magnetometer: yas530: Rename functions and registers, Andy Shevchenko
      • Re: [PATCH v5 06/14] iio: magnetometer: yas530: Rename functions and registers, Jakob Hauser
  • [PATCH v5 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack, Jakob Hauser
    • Re: [PATCH v5 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack, Andy Shevchenko
      • Re: [PATCH v5 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack, Jakob Hauser
  • [PATCH v5 08/14] iio: magnetometer: yas530: Apply documentation and style fixes, Jakob Hauser
  • [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Jakob Hauser
    • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, kernel test robot
      • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Andy Shevchenko
        • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Andy Shevchenko
        • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Nathan Chancellor
          • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Andy Shevchenko
            • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Nathan Chancellor
            • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Jakob Hauser
    • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Andy Shevchenko
      • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Jakob Hauser
    • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Andy Shevchenko
      • Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure, Jakob Hauser
  • [PATCH v5 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info", Jakob Hauser
    • Re: [PATCH v5 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info", Andy Shevchenko
      • Re: [PATCH v5 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info", Jakob Hauser
  • [PATCH v5 11/14] iio: magnetometer: yas530: Add IIO scaling to "chip_info", Jakob Hauser
    • Re: [PATCH v5 11/14] iio: magnetometer: yas530: Add IIO scaling to "chip_info", Andy Shevchenko
  • [PATCH v5 10/14] iio: magnetometer: yas530: Add volatile registers to "chip_info", Jakob Hauser
    • Re: [PATCH v5 10/14] iio: magnetometer: yas530: Add volatile registers to "chip_info", Andy Shevchenko
  • [PATCH v5 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info", Jakob Hauser
    • Re: [PATCH v5 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info", Andy Shevchenko
      • Re: [PATCH v5 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info", Jakob Hauser
  • [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant, Jakob Hauser
    • Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant, Andy Shevchenko
      • Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant, Jakob Hauser
        • Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant, Linus Walleij
          • Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant, Andy Shevchenko
• [PATCH 0/5] PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO., Jonathan Cameron
  • [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own., Jonathan Cameron
    • Re: [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own., Paul Cercueil
      • Re: [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own., Jonathan Cameron
  • [PATCH 3/5] iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace., Jonathan Cameron
    • Re: [PATCH 3/5] iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace., Rui Miguel Silva
  • [PATCH 2/5] iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS(), Jonathan Cameron
    • Re: [PATCH 2/5] iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS(), Sean Nyekjaer
  • [PATCH 4/5] iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace, Jonathan Cameron
  • [PATCH 5/5] iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace, Jonathan Cameron
    • Re: [PATCH 5/5] iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace, Linus Walleij
  • Re: [PATCH 0/5] PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO., Andy Shevchenko
  • Re: [PATCH 0/5] PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO., Linus Walleij
    • Re: [PATCH 0/5] PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO., Jonathan Cameron
• [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*, Jonathan Cameron
  • Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*, Andy Shevchenko
    • Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*, Jonathan Cameron
      • Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*, Andy Shevchenko
        • Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*, Jonathan Cameron
  • Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*, Jonathan Cameron
• [PATCH 0/2] iio: Convert some drivers from deprecated UNIVERSAL_DEV_PM_OPS(), Jonathan Cameron
  • [PATCH 1/2] iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS()., Jonathan Cameron
    • Re: [PATCH 1/2] iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS()., Jean-Baptiste Maneyrol
      • Re: [PATCH 1/2] iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS()., Jonathan Cameron
  • [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(), Jonathan Cameron
    • Re: [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(), Crt Mori
      • Re: [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(), Jonathan Cameron
        • Re: [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(), Jonathan Cameron
  • Re: [PATCH 0/2] iio: Convert some drivers from deprecated UNIVERSAL_DEV_PM_OPS(), Andy Shevchenko
• [PATCH 0/6] iio: PM macro rework continued., Jonathan Cameron
  • [PATCH 1/6] iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
    • Re: [PATCH 1/6] iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
  • [PATCH 2/6] iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
    • Re: [PATCH 2/6] iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
  • [PATCH 3/6] iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
    • Re: [PATCH 3/6] iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
  • [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Jonathan Cameron
    • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Andy Shevchenko
      • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Paul Cercueil
        • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Andy Shevchenko
          • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Paul Cercueil
            • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Andy Shevchenko
              • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Paul Cercueil
                • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Andy Shevchenko
    • Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops, Jonathan Cameron
  • [PATCH 5/6] iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr(), Jonathan Cameron
    • Re: [PATCH 5/6] iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr(), Jonathan Cameron
  • [PATCH 6/6] iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS(), Jonathan Cameron
    • Re: [PATCH 6/6] iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS(), Jonathan Cameron
  • Re: [PATCH 0/6] iio: PM macro rework continued., Andy Shevchenko
• [PATCH 0/2] Trivial cleanup and refactor dev_pm_ops handling., Jonathan Cameron
  • [PATCH 1/2] iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driver, Jonathan Cameron
  • [PATCH 2/2] iio: magn: hmc5843: Move struct dev_pm_ops out of header, Jonathan Cameron
  • Re: [PATCH 0/2] iio: magn: hmc5843: Trivial cleanup and refactor dev_pm_ops handling., Jonathan Cameron
  • Re: [PATCH 0/2] Trivial cleanup and refactor dev_pm_ops handling., Andy Shevchenko
    • Re: [PATCH 0/2] Trivial cleanup and refactor dev_pm_ops handling., Jonathan Cameron
• [PATCH] iio: adc: mt6360: Drop an incorrect __maybe_unused marking., Jonathan Cameron
  • Re: [PATCH] iio: adc: mt6360: Drop an incorrect __maybe_unused marking., Andy Shevchenko
    • Re: [PATCH] iio: adc: mt6360: Drop an incorrect __maybe_unused marking., Jonathan Cameron
• [PATCH 0/4] staging: iio: DMA alignment fixes., Jonathan Cameron
  • [PATCH 1/4] staging: iio: frequency: ad9832: Fix alignment for DMA safety, Jonathan Cameron
    • Re: [PATCH 1/4] staging: iio: frequency: ad9832: Fix alignment for DMA safety, Andy Shevchenko
      • Re: [PATCH 1/4] staging: iio: frequency: ad9832: Fix alignment for DMA safety, Jonathan Cameron
  • [PATCH 2/4] staging: iio: frequency: ad9834: Fix alignment for DMA safety, Jonathan Cameron
  • [PATCH 3/4] staging: iio: meter: ade7854: Fix alignment for DMA safety, Jonathan Cameron
  • [PATCH 4/4] staging: iio: resolver: ad2s1210: Fix alignment for DMA safety, Jonathan Cameron
  • Re: [PATCH 0/4] staging: iio: DMA alignment fixes., Andy Shevchenko
    • Re: [PATCH 0/4] staging: iio: DMA alignment fixes., Jonathan Cameron
• [PATCH 0/2] IIO: Clean up a couple of warnings that snuck in., Jonathan Cameron
  • [PATCH 1/2] iio: test: Mark file local structure arrays static., Jonathan Cameron
    • Re: [PATCH 1/2] iio: test: Mark file local structure arrays static., Liam Beguin
  • [PATCH 2/2] iio: light: cm32181: Mark the dev_pm_ops static., Jonathan Cameron
  • Re: [PATCH 0/2] IIO: Clean up a couple of warnings that snuck in., Andy Shevchenko
    • Re: [PATCH 0/2] IIO: Clean up a couple of warnings that snuck in., Jonathan Cameron
• [PATCH v5 0/5] Add support for pressure sensor Bosch BMP380, Angel Iglesias
  • [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic, Angel Iglesias
    • Re: [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic, Andy Shevchenko
    • Re: [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic, Jonathan Cameron
      • Re: [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic, Angel Iglesias
  • [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety, Angel Iglesias
    • Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety, Andy Shevchenko
      • Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety, Angel Iglesias
        • Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety, Jonathan Cameron
    • Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety, Jonathan Cameron
  • [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Angel Iglesias
    • Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Andy Shevchenko
      • Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Angel Iglesias
        • Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Jonathan Cameron
    • Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Jonathan Cameron
      • Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Angel Iglesias
        • Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Jonathan Cameron
  • [PATCH v5 4/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string, Angel Iglesias
  • [PATCH v5 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380, Angel Iglesias
    • Re: [PATCH v5 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380, Andy Shevchenko
      • Re: [PATCH v5 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380, Angel Iglesias
        • Re: [PATCH v5 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380, Jonathan Cameron
• [PATCH] iio: light: cm3605: Fix an error handling path in cm3605_probe(), Christophe JAILLET
  • Re: [PATCH] iio: light: cm3605: Fix an error handling path in cm3605_probe(), Jonathan Cameron
• [PATCH v12 0/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v12 1/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v12 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
    • Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support, Jonathan Cameron
      • Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support, Artur Rojek
        • Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support, Dmitry Torokhov
          • Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
  • [PATCH v12 3/3] arm64: dts: rockchip: Update joystick to polled for OG2, Chris Morgan
• [PATCH v2 0/5] Add Qcom PM6125 PMIC, and use in Sony Xperia Seine PDX201, Marijn Suijten
  • [PATCH v2 3/5] arm64: dts: qcom: Add PM6125 PMIC, Marijn Suijten
    • Re: [PATCH v2 3/5] arm64: dts: qcom: Add PM6125 PMIC, Krzysztof Kozlowski
      • Re: [PATCH v2 3/5] arm64: dts: qcom: Add PM6125 PMIC, Marijn Suijten
        • Re: [PATCH v2 3/5] arm64: dts: qcom: Add PM6125 PMIC, Krzysztof Kozlowski
  • [PATCH v2 2/5] iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels, Marijn Suijten
    • Re: [PATCH v2 2/5] iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels, Jonathan Cameron
  • [PATCH v2 4/5] arm64: dts: qcom: sm6125-seine: Include PM6125 and configure PON, Marijn Suijten
  • [PATCH v2 5/5] arm64: dts: qcom: sm6125-seine: Configure additional trinket thermistors, Marijn Suijten
  • [PATCH v2 1/5] arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name, Marijn Suijten
• [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Krzysztof Kozlowski
  • Re: [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Jonathan Cameron
    • Re: [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Krzysztof Kozlowski
      • Re: [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Jonathan Cameron
• [PATCH v7 00/13] Add MediaTek MT6370 PMIC support, ChiaEn Wu
  • [PATCH v7 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC, ChiaEn Wu
  • [PATCH v7 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger, ChiaEn Wu
  • [PATCH v7 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator, ChiaEn Wu
  • [PATCH v7 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight, ChiaEn Wu
  • [PATCH v7 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight, ChiaEn Wu
  • [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370, ChiaEn Wu
    • Re: [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370, Lee Jones
      • Re: [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370, Jonathan Cameron
      • Re: [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370, Rob Herring
  • [PATCH v7 07/13] mfd: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
    • Re: [PATCH v7 07/13] mfd: mt6370: Add MediaTek MT6370 support, Lee Jones
  • [PATCH v7 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, ChiaEn Wu
    • Re: [PATCH v7 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, Andy Shevchenko
    • Re: [PATCH v7 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, Heikki Krogerus
  • [PATCH v7 09/13] iio: adc: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
    • Re: [PATCH v7 09/13] iio: adc: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
      • Re: [PATCH v7 09/13] iio: adc: mt6370: Add MediaTek MT6370 support, Jonathan Cameron
  • [PATCH v7 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver, ChiaEn Wu
    • Re: [PATCH v7 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver, Andy Shevchenko
    • Re: [PATCH v7 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver, Matti Vaittinen
  • [PATCH v7 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, ChiaEn Wu
    • Re: [PATCH v7 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Andy Shevchenko
  • [PATCH v7 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, ChiaEn Wu
    • Re: [PATCH v7 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, Andy Shevchenko
  • [PATCH v7 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
    • Re: [PATCH v7 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
• [PATCH v5 28/33] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Daniel Lezcano
  • Re: [PATCH v5 28/33] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Jernej Škrabec
• [PATCH v11 0/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v11 3/3] arm64: dts: rockchip: Update joystick to polled for OG2, Chris Morgan
  • [PATCH v11 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
  • [PATCH v11 1/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
• [PATCH v10 0/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v10 1/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v10 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
    • Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support, Artur Rojek
      • Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
        • Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support, Artur Rojek
          • Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
  • [PATCH v10 3/3] arm64: dts: rockchip: Update joystick to polled for OG2, Chris Morgan
• [PATCH v9 0/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v9 1/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v9 3/3] arm64: dts: rockchip: Update joystick to polled for OG2, Chris Morgan
  • [PATCH v9 2/3] Input: adc-joystick - Add polled input device support, Chris Morgan
    • Re: [PATCH v9 2/3] Input: adc-joystick - Add polled input device support, Artur Rojek
• [PATCH v2] i2c: Use u8 type in i2c transfer calls, Jason Gerecke
  • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Andy Shevchenko
    • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Jason Gerecke
      • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Wolfram Sang
        • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Jason Gerecke
          • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Wolfram Sang
            • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Jonathan Cameron
  • Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls, Jonathan Cameron
• [PATCH v4 0/3] iio: accel: add MSA311 accelerometer driver, Dmitry Rokosov
  • [PATCH v4 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver, Dmitry Rokosov
    • Re: [PATCH v4 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver, Rob Herring
  • [PATCH v4 1/3] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd., Dmitry Rokosov
  • [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
    • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Andy Shevchenko
      • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
        • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
          • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Andy Shevchenko
            • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
              • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Andy Shevchenko
                • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
                  • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Andy Shevchenko
        • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Andy Shevchenko
          • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
        • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Jonathan Cameron
          • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
            • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Andy Shevchenko
              • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
                • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Jonathan Cameron
                  • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Jonathan Cameron
    • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Christophe JAILLET
      • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
        • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Christophe JAILLET
          • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
    • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Jonathan Cameron
      • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Dmitry Rokosov
        • Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver, Jonathan Cameron
• [PATCH] iio: add NULL pointer checks to iio device additional/removal, Matt Ranostay
  • Re: [PATCH] iio: add NULL pointer checks to iio device additional/removal, Andy Shevchenko
    • Re: [PATCH] iio: add NULL pointer checks to iio device additional/removal, Andy Shevchenko
      • Re: [PATCH] iio: add NULL pointer checks to iio device additional/removal, Jonathan Cameron
• [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor, Claudiu Beznea
  • [PATCH v3 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch, Claudiu Beznea
  • [PATCH v3 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume, Claudiu Beznea
  • [PATCH v3 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq, Claudiu Beznea
  • [PATCH v3 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled, Claudiu Beznea
  • [PATCH v3 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function, Claudiu Beznea
  • [PATCH v3 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions, Claudiu Beznea
  • [PATCH v3 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX, Claudiu Beznea
  • [PATCH v3 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines, Claudiu Beznea
  • [PATCH v3 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops, Claudiu Beznea
  • [PATCH v3 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data, Claudiu Beznea
  • [PATCH v3 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio, Claudiu Beznea
  • [PATCH v3 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function, Claudiu Beznea
  • [PATCH v3 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr, Claudiu Beznea
  • [PATCH v3 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel, Claudiu Beznea
  • [PATCH v3 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw(), Claudiu Beznea
  • [PATCH v3 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq(), Claudiu Beznea
  • [PATCH v3 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions, Claudiu Beznea
  • [PATCH v3 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor, Claudiu Beznea
  • [PATCH v3 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support, Claudiu Beznea
  • Re: [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor, Jonathan Cameron
• [PATCH 1/3] iio: adc: add imx93 adc support, haibo . chen
  • [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC, haibo . chen
    • Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC, Krzysztof Kozlowski
      • RE: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC, Bough Chen
        • Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC, Krzysztof Kozlowski
          • RE: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC, Bough Chen
            • Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC, Krzysztof Kozlowski
  • [PATCH 3/3] arm64: dts: imx93: add ADC support, haibo . chen
  • Re: [PATCH 1/3] iio: adc: add imx93 adc support, Jonathan Cameron
    • RE: [PATCH 1/3] iio: adc: add imx93 adc support, Bough Chen
• [PATCH 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation, Crt Mori
  • Re: [PATCH 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation, Krzysztof Kozlowski
• [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor, Crt Mori
  • Re: [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor, Jonathan Cameron
    • Re: [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor, Lars-Peter Clausen
• [PATCH 0/2] iio: temperature: mlx90632: Add supply regulator, Crt Mori
• [PATCH v4 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Daniel Lezcano
• [PATCH v3 0/3] units: complement the set of Hz units, Dmitry Rokosov
  • [PATCH v3 2/3] iio: accel: adxl345: use HZ macro from units.h, Dmitry Rokosov
  • [PATCH v3 3/3] iio: common: scmi_sensors: use HZ macro from units.h, Dmitry Rokosov
  • [PATCH v3 1/3] units: complement the set of Hz units, Dmitry Rokosov
  • Re: [PATCH v3 0/3] units: complement the set of Hz units, Jonathan Cameron
• [PATCH] iio: Add names for function definition arguments., Joe Simmons-Talbott
  • Re: [PATCH] iio: Add names for function definition arguments., Jonathan Cameron
• [PATCH v2 0/3] units: complement the set of Hz units, Dmitry Rokosov
  • [PATCH v2 2/3] iio: accel: adxl345: use HZ macro from units.h, Dmitry Rokosov
    • Re: [PATCH v2 2/3] iio: accel: adxl345: use HZ macro from units.h, Andy Shevchenko
  • [PATCH v2 3/3] iio: common: scmi_sensors: use HZ macro from units.h, Dmitry Rokosov
    • Re: [PATCH v2 3/3] iio: common: scmi_sensors: use HZ macro from units.h, Andy Shevchenko
  • [PATCH v2 1/3] units: complement the set of Hz units, Dmitry Rokosov
    • Re: [PATCH v2 1/3] units: complement the set of Hz units, Andy Shevchenko
      • Re: [PATCH v2 1/3] units: complement the set of Hz units, Jonathan Cameron
        • Re: [PATCH v2 1/3] units: complement the set of Hz units, Dmitry Rokosov
• [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Matt Ranostay
  • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Jonathan Cameron
    • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Matt Ranostay
  • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Andy Shevchenko
    • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Matt Ranostay
      • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Andy Shevchenko
        • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Jonathan Cameron
          • Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem, Andy Shevchenko
• [PATCH v3 0/2] ECAP support on TI AM62x SoC, Julien Panis
  • [PATCH v3 1/2] dt-binding: iio: time: add ti,am62-ecap-capture.yaml, Julien Panis
    • Re: [PATCH v3 1/2] dt-binding: iio: time: add ti,am62-ecap-capture.yaml, Krzysztof Kozlowski
  • [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
    • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Christophe JAILLET
      • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
    • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Jonathan Cameron
      • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
        • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
          • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Jonathan Cameron
          • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, William Breathitt Gray
            • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
              • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, William Breathitt Gray
                • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
                  • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
        • Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Jonathan Cameron
• [PATCH v5 0/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
  • [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
    • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
    • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Jonathan Cameron
      • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
        • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
          • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Patrick Williams
            • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
              • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
                • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Jonathan Cameron
                  • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Krzysztof Kozlowski
                    • Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
  • [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback, Potin Lai
    • Re: [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback, Andy Shevchenko
      • Re: [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback, Potin Lai
        • Re: [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback, Andy Shevchenko
• [PATCH v2 0/2] ECAP support on TI AM62x SoC, Julien Panis
  • [PATCH v2 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
    • Re: [PATCH v2 2/2] iio: time: capture-tiecap: capture driver support for ECAP, Krzysztof Kozlowski
  • [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml, Julien Panis
    • Re: [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml, Krzysztof Kozlowski
      • Re: [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml, Julien Panis
• [PATCH v4 0/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
  • [PATCH v4 1/2] iio: humidity: hdc100x: switch to probe_new callback, Potin Lai
  • [PATCH v4 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
    • Message not available
      • Re: [PATCH v4 0/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
        • Re: [PATCH v4 0/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
• [PATCH v3 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Daniel Lezcano
  • Re: [PATCH v3 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Jonathan Cameron
    • Re: [PATCH v3 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Daniel Lezcano
• [PATCH 0/2] iio: Whitespace cleanup, Joe Simmons-Talbott
  • [PATCH 2/2] iio: Fix indentation for multiline conditional., Joe Simmons-Talbott
  • [PATCH 1/2] iio: Add blank lines after declarations., Joe Simmons-Talbott
  • Re: [PATCH 0/2] iio: Whitespace cleanup, Jonathan Cameron
• [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml, Krzysztof Kozlowski
    • Re: [PATCH v2 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml, Marcus Folkesson
  • [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml, Krzysztof Kozlowski
    • Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml, Jonathan Cameron
      • Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml, Rob Herring
        • Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml, Krzysztof Kozlowski
          • Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml, Jonathan Cameron
  • [PATCH v2 03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 04/10] dt-bindings: iio: dac: use spi-peripheral-props.yaml, Krzysztof Kozlowski
    • Re: [PATCH v2 04/10] dt-bindings: iio: dac: use spi-peripheral-props.yaml, Lukas Wunner
  • [PATCH v2 06/10] dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 05/10] dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 10/10] dt-bindings: iio: temperature: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 09/10] dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 07/10] dt-bindings: iio: imu: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • [PATCH v2 08/10] dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml, Krzysztof Kozlowski
  • Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml, Lukas Wunner
    • Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml, Krzysztof Kozlowski
      • Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml, Lukas Wunner
        • Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml, Krzysztof Kozlowski
        • Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml, Rob Herring
• [PATCH v3 0/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
  • [PATCH v3 1/2] iio: humidity: hdc100x: switch to probe_new callback, Potin Lai
    • Re: [PATCH v3 1/2] iio: humidity: hdc100x: switch to probe_new callback, Andy Shevchenko
  • [PATCH v3 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Potin Lai
    • Re: [PATCH v3 2/2] iio: humidity: hdc100x: add manufacturer and device ID check, Andy Shevchenko
• [PATCH] dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc, Krzysztof Kozlowski
  • Re: [PATCH] dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc, Rob Herring
    • Re: [PATCH] dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc, Jonathan Cameron
• [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Krzysztof Kozlowski
  • Re: [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Rob Herring
  • Re: [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Jonathan Cameron
    • Re: [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins, Krzysztof Kozlowski
• [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck, Potin Lai
  • Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck, Andy Shevchenko
    • Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck, Potin Lai
      • Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck, Andy Shevchenko
        • Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck, Potin Lai
• [PATCH v1 1/1] iio: pressure: dlhl60d: Don't take garbage into consideration when reading data, Andy Shevchenko
  • Re: [PATCH v1 1/1] iio: pressure: dlhl60d: Don't take garbage into consideration when reading data, Jonathan Cameron
    • Re: [PATCH v1 1/1] iio: pressure: dlhl60d: Don't take garbage into consideration when reading data, Jonathan Cameron
• [PATCH v1 0/2] ECAP support on TI AM62x SoC, Julien Panis
  • [PATCH v1 1/2] iio: time: capture-tiecap: capture driver support for ECAP, Julien Panis
  • [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml, Julien Panis
    • Re: [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml, Krzysztof Kozlowski
      • Re: [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml, Julien Panis
    • Re: [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml, Rob Herring
• [PATCH v2 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API, Daniel Lezcano
• [PATCH v1 0/3] units: complement the set of Hz units, Dmitry Rokosov
  • [PATCH v1 1/3] units: complement the set of Hz units, Dmitry Rokosov
    • Re: [PATCH v1 1/3] units: complement the set of Hz units, Andy Shevchenko
      • Re: [PATCH v1 1/3] units: complement the set of Hz units, Dmitry Rokosov
  • [PATCH v1 3/3] iio: common: scmi_sensors: use HZ macro from units.h, Dmitry Rokosov
  • [PATCH v1 2/3] iio: accel: adxl345: use HZ macro from units.h, Dmitry Rokosov
• [PATCH v10 0/2] Add LTRF216A Driver, Shreeya Patel
  • [PATCH v10 1/2] dt-bindings: Document ltrf216a light sensor bindings, Shreeya Patel
  • [PATCH v10 2/2] iio: light: Add support for ltrf216a sensor, Shreeya Patel
  • Re: [PATCH v10 0/2] Add LTRF216A Driver, Jonathan Cameron
• Controlling device power management from terminal, Crt Mori
  • Re: Controlling device power management from terminal, Andy Shevchenko
    • Re: Controlling device power management from terminal, Crt Mori
      • Re: Controlling device power management from terminal, Andy Shevchenko
        • Re: Controlling device power management from terminal, Crt Mori
          • Re: Controlling device power management from terminal, Jonathan Cameron
            • Re: Controlling device power management from terminal, Crt Mori
              • Re: Controlling device power management from terminal, Jonathan Cameron
• [PATCH 1/2] iio: st_sensors: Retry ID verification on failure, Matti Lehtimäki
  • [PATCH 2/2] iio: st_sensors: Fix null pointer on defer_probe error, Matti Lehtimäki
    • Re: [PATCH 2/2] iio: st_sensors: Fix null pointer on defer_probe error, Andy Shevchenko
  • Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure, Andy Shevchenko
  • Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure, Jonathan Cameron
    • Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure, Matti Lehtimäki
      • Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure, Jonathan Cameron
        • Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure, Linus Walleij
• [PATCH v4 0/5] Add support for pressure sensor Bosch BMP380, Angel Iglesias
  • [PATCH v4 1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string, Angel Iglesias
  • [PATCH v4 2/5] iio: pressure: bmp280: simplify driver initialization logic, Angel Iglesias
    • Re: [PATCH v4 2/5] iio: pressure: bmp280: simplify driver initialization logic, Andy Shevchenko
  • [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety, Angel Iglesias
    • Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety, Andy Shevchenko
      • Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety, Jonathan Cameron
    • Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety, Jonathan Cameron
      • Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety, Angel Iglesias
  • [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Angel Iglesias
    • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, kernel test robot
    • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, kernel test robot
    • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, kernel test robot
    • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Andy Shevchenko
      • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Angel Iglesias
    • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Jonathan Cameron
      • Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family, Angel Iglesias
  • [PATCH v4 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380, Angel Iglesias
    • Re: [PATCH v4 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380, Andy Shevchenko
• [PATCH] MAINTAINERS: Update Microchip MCP3911 to Maintained, Marcus Folkesson
  • Re: [PATCH] MAINTAINERS: Update Microchip MCP3911 to Maintained, Jonathan Cameron
• [PATCH 1/1] iio: humidity: hdc100x: add manufacturer and device id cehck, Potin Lai
  • Re: [PATCH 1/1] iio: humidity: hdc100x: add manufacturer and device id cehck, Andy Shevchenko
• [PATCH v4 0/9] Improve MCP3911 driver, Marcus Folkesson
  • [PATCH v4 1/9] iio: adc: mcp3911: make use of the sign bit, Marcus Folkesson
  • [PATCH v4 9/9] iio: adc: mcp3911: add support to set PGA, Marcus Folkesson
    • Re: [PATCH v4 9/9] iio: adc: mcp3911: add support to set PGA, Jonathan Cameron
  • [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Marcus Folkesson
    • Re: [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Jonathan Cameron
    • Re: [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Jonathan Cameron
  • [PATCH v4 6/9] iio: adc: mcp3911: add support for interrupts, Marcus Folkesson
    • Re: [PATCH v4 6/9] iio: adc: mcp3911: add support for interrupts, Jonathan Cameron
  • [PATCH v4 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Marcus Folkesson
  • [PATCH v4 8/9] iio: adc: mcp3911: add support for oversampling ratio, Marcus Folkesson
  • [PATCH v4 3/9] iio: adc: mcp3911: use correct formula for AD conversion, Marcus Folkesson
    • Re: [PATCH v4 3/9] iio: adc: mcp3911: use correct formula for AD conversion, Jonathan Cameron
  • [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers, Marcus Folkesson
    • Re: [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers, Jonathan Cameron
      • Re: [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers, Marcus Folkesson
  • [PATCH v4 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property, Marcus Folkesson
  • Re: [PATCH v4 0/9] Improve MCP3911 driver, Jonathan Cameron
    • Re: [PATCH v4 0/9] Improve MCP3911 driver, Marcus Folkesson
      • Re: [PATCH v4 0/9] Improve MCP3911 driver, Jonathan Cameron
• [PATCH v6 00/13] Add MediaTek MT6370 PMIC support, ChiaEn Wu
  • [PATCH v6 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC, ChiaEn Wu
  • [PATCH v6 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger, ChiaEn Wu
  • [PATCH v6 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator, ChiaEn Wu
  • [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight, ChiaEn Wu
    • Re: [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight, Pavel Machek
  • [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight, ChiaEn Wu
    • Re: [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight, ChiaEn Wu
  • [PATCH v6 06/13] dt-bindings: mfd: Add MediaTek MT6370, ChiaEn Wu
  • [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
    • Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
      • Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
        • Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
          • Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
            • Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
  • [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, ChiaEn Wu
    • Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, Guenter Roeck
    • Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, Chunfeng Yun
      • Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, ChiaEn Wu
    • Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver, Andy Shevchenko
  • [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
    • Re: [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
  • [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver, ChiaEn Wu
    • Re: [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver, Andy Shevchenko
  • [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, ChiaEn Wu
    • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, AngeloGioacchino Del Regno
    • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, Andy Shevchenko
      • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, ChiaEn Wu
        • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, Andy Shevchenko
          • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, ChiaEn Wu
            • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, Andy Shevchenko
    • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, Pavel Machek
      • Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support, szuni chen
  • [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
    • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, Andy Shevchenko
    • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, Daniel Thompson
      • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
        • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, Daniel Thompson
          • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
            • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, Daniel Thompson
              • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, ChiaEn Wu
                • Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support, Daniel Thompson
  • [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, ChiaEn Wu
    • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, AngeloGioacchino Del Regno
    • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Andy Shevchenko
      • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, szuni chen
        • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Andy Shevchenko
    • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Andy Shevchenko
      • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, szuni chen
        • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Andy Shevchenko
    • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Pavel Machek
      • Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support, Alice Chen
• [PATCH 0/4] iio: afe/rescale improvements, Paul Cercueil
  • [PATCH 2/4] iio: core: Add support for IIO_AVAIL_LIST_WITH_TYPE, Paul Cercueil
    • Re: [PATCH 2/4] iio: core: Add support for IIO_AVAIL_LIST_WITH_TYPE, Jonathan Cameron
  • [PATCH 1/4] iio: inkern: Remove useless argument to iio_channel_read_max(), Paul Cercueil
    • Re: [PATCH 1/4] iio: inkern: Remove useless argument to iio_channel_read_max(), Jonathan Cameron
  • [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table, Paul Cercueil
    • Re: [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table, Peter Rosin
      • Re: [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table, Paul Cercueil
        • Re: [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table, Jonathan Cameron
  • [PATCH 4/4] iio: afe/rescale: Implement write_raw, Paul Cercueil
    • Re: [PATCH 4/4] iio: afe/rescale: Implement write_raw, Peter Rosin
      • Re: [PATCH 4/4] iio: afe/rescale: Implement write_raw, Paul Cercueil
• [PATCH v8 0/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v8 1/3] dt-bindings: adc-joystick: add poll-interval, Chris Morgan
  • [PATCH v8 3/3] arm64: dts: rockchip: Update joystick to polled for OG2, Chris Morgan