Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- [PATCH v5 0/2] Add Richtek RTQ6056 support,
cy_huang
- [PATCH v5 00/13] Add support for AXP192 PMIC,
Aidan MacDonald
- [PATCH v5 01/13] dt-bindings: mfd: add bindings for AXP192 MFD device, Aidan MacDonald
- [PATCH v5 02/13] dt-bindings: iio: adc: axp209: Add AXP192 compatible, Aidan MacDonald
- [PATCH v5 03/13] dt-bindings: power: supply: axp20x: Add AXP192 compatible, Aidan MacDonald
- [PATCH v5 09/13] iio: adc: axp20x_adc: Add support for AXP192, Aidan MacDonald
- [PATCH v5 10/13] power: supply: axp20x_usb_power: Add support for AXP192, Aidan MacDonald
- [PATCH v5 06/13] regulator: axp20x: Add support for AXP192, Aidan MacDonald
- [PATCH v5 08/13] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field, Aidan MacDonald
- [PATCH v5 07/13] iio: adc: axp20x_adc: Minor code cleanups, Aidan MacDonald
- [PATCH v5 04/13] dt-bindings: power: axp20x-battery: Add AXP192 compatible, Aidan MacDonald
- [PATCH v5 12/13] power: axp20x_battery: Support battery status without fuel gauge, Aidan MacDonald
- [PATCH v5 05/13] mfd: axp20x: Add support for AXP192, Aidan MacDonald
- [PATCH v5 11/13] power: axp20x_battery: Add constant charge current table, Aidan MacDonald
- [PATCH v5 13/13] power: axp20x_battery: Add support for AXP192, Aidan MacDonald
- [PATCH v7 0/3] adc-joystick: Add polled support,
Chris Morgan
- [PATCH v4 0/2] Add Richtek RTQ6056 support,
cy_huang
- [PATCH] iio: light: cm32181: Add PM support,
Kai-Heng Feng
- [PATCH v6 01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074,
Robert Marko
- [PATCH v6 02/12] mfd: qcom-spmi-pmic: add support for PMP8074, Robert Marko
- [PATCH v6 03/12] dt-bindings: regulator: qcom,spmi-regulator: Convert to dtschema, Robert Marko
- [PATCH v6 04/12] regulator: qcom_spmi: add support for HT_P150, Robert Marko
- [PATCH v6 05/12] regulator: qcom_spmi: add support for HT_P600, Robert Marko
- [PATCH v6 11/12] arm64: dts: qcom: add PMP8074 DTSI, Robert Marko
- [PATCH v6 12/12] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply, Robert Marko
- [PATCH v6 10/12] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5, Robert Marko
- [PATCH v6 09/12] pinctrl: qcom-pmic-gpio: add support for PMP8074, Robert Marko
- [PATCH v6 06/12] dt-bindings: regulator: qcom,spmi-regulator: add PMP8074 PMIC, Robert Marko
- [PATCH v6 07/12] regulator: qcom_spmi: add support for PMP8074 regulators, Robert Marko
- [PATCH v6 08/12] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074, Robert Marko
- Re: [PATCH v6 01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074, Krzysztof Kozlowski
- Re: (subset) [PATCH v6 01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074, Mark Brown
- [PATCH v3 0/9] Improve MCP3911 driver,
Marcus Folkesson
- [PATCH v3 1/9] iio: adc: mcp3911: make use of the sign bit, Marcus Folkesson
- [PATCH v3 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property, Marcus Folkesson
- [PATCH v3 3/9] iio: adc: mcp3911: use correct formula for AD conversion, Marcus Folkesson
- [PATCH v3 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Marcus Folkesson
- [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts, Marcus Folkesson
- [PATCH v3 5/9] iio: adc: mcp3911: add support for buffers, Marcus Folkesson
- [PATCH v3 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register, Marcus Folkesson
- [PATCH v3 8/9] iio: adc: mcp3911: add support for oversampling ratio, Marcus Folkesson
- [PATCH v3 9/9] iio: adc: mcp3911: add support to set PGA, Marcus Folkesson
- Re: [PATCH v3 0/9] Improve MCP3911 driver, Andy Shevchenko
- [PATCH 1/3] iio: adc: add max11410 adc driver,
Ibrahim Tilki
- [PATCH v3 0/2] Add Richtek RTQ6056 support,
cy_huang
- [PATCH v4 00/13] Add Mediatek MT6370 PMIC support,
ChiaEn Wu
- [PATCH v4 02/13] dt-bindings: power: supply: Add Mediatek MT6370 Charger, ChiaEn Wu
- [PATCH v4 03/13] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator, ChiaEn Wu
- [PATCH v4 01/13] dt-bindings: usb: Add Mediatek MT6370 TCPC, ChiaEn Wu
- [PATCH v4 04/13] dt-bindings: leds: Add Mediatek MT6370 flashlight, ChiaEn Wu
- [PATCH v4 05/13] dt-bindings: backlight: Add Mediatek MT6370 backlight, ChiaEn Wu
- [PATCH v4 06/13] dt-bindings: mfd: Add Mediatek MT6370, ChiaEn Wu
- [PATCH v4 07/13] mfd: mt6370: Add Mediatek MT6370 support, ChiaEn Wu
- [PATCH v4 08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver, ChiaEn Wu
- [PATCH v4 09/13] iio: adc: mt6370: Add Mediatek MT6370 support, ChiaEn Wu
- [PATCH v4 10/13] power: supply: mt6370: Add Mediatek MT6370 charger driver, ChiaEn Wu
- [PATCH v4 11/13] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support, ChiaEn Wu
- [PATCH v4 12/13] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support, ChiaEn Wu
- [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support, ChiaEn Wu
- [PATCH v2 5/5] iio: pressure: bmp280: Adds more tunable config parameters for BMP380,
Angel Iglesias
- [PATCH v2 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family,
Angel Iglesias
- [PATCH v2 1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string,
Angel Iglesias
- [PATCH v2 3/5] iio: pressure: bmp280: simplify driver initialization logic,
Angel Iglesias
- [PATCH v2 2/5] iio: pressure: Kconfig: Add references to BMP380,
Angel Iglesias
- [PATCH v2 0/5] Add support for pressure sensor Bosch BMP380, Angel Iglesias
- [PATCH v4 00/10] Add support for magnetometer Yamaha YAS537,
Jakob Hauser
- [PATCH v4 02/10] iio: magnetometer: yas530: Change range of data in volatile register, Jakob Hauser
- [PATCH v4 01/10] iio: magnetometer: yas530: Change data type of hard_offsets to signed, Jakob Hauser
- [PATCH v4 03/10] iio: magnetometer: yas530: Correct scaling of magnetic axes, Jakob Hauser
- [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant, Jakob Hauser
- [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure, Jakob Hauser
- [PATCH v4 07/10] iio: magnetometer: yas530: Move printk %*ph parameters out from stack, Jakob Hauser
- [PATCH v4 05/10] iio: magnetometer: yas530: Change data type of calibration coefficients, Jakob Hauser
- [PATCH v4 04/10] iio: magnetometer: yas530: Correct temperature handling, Jakob Hauser
- [PATCH v4 06/10] iio: magnetometer: yas530: Rename functions and registers, Jakob Hauser
- [PATCH v4 08/10] iio: magnetometer: yas530: Apply documentation and style fixes, Jakob Hauser
- Re: [PATCH v4 00/10] Add support for magnetometer Yamaha YAS537, Linus Walleij
- fast spi driver development,
Patricio Moreno
- [PATCH] iio: proximity: sx9324: add empty line in front of bullet list,
Akira Yokosawa
- [PATCH] iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode,
Marcus Folkesson
- Re: [linux-next:master] BUILD REGRESSION 6cc11d2a1759275b856e464265823d94aabd5eaf, Roman Gushchin
- [PATCH 0/2] iio: adc: ti-adc128s052: Add support for adc102s021 and family,
Nishanth Menon
- [PATCH V1 0/1] iio: accel: sca3300: Extend the trigger buffer,
LI Qingwu
- [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used,
Nishanth Menon
- [PATCH net-next v1 1/1] iio: adc: tsc2046: silent spi_device_id warning,
Oleksij Rempel
- [PATCH] iio: humidity: dht11: Improve error reporting in .probe(),
Uwe Kleine-König
- [PATCH v6 0/3] adc-joystick: Add polled support,
Chris Morgan
- [PATCH] iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode,
Marcus Folkesson
- [PATCH] iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode, Marcus Folkesson
- [PATCH v4 00/15] Add support for AXP192 PMIC,
Aidan MacDonald
- [PATCH v4 02/15] dt-bindings: iio: adc: axp209: Add AXP192 compatible, Aidan MacDonald
- [PATCH v4 04/15] dt-bindings: gpio: Add AXP192 GPIO bindings, Aidan MacDonald
- [PATCH v4 01/15] dt-bindings: mfd: add bindings for AXP192 MFD device, Aidan MacDonald
- [PATCH v4 03/15] dt-bindings: power: supply: axp20x: Add AXP192 compatible, Aidan MacDonald
- [PATCH v4 05/15] dt-bindings: power: axp20x-battery: Add AXP192 compatible, Aidan MacDonald
- [PATCH v4 06/15] mfd: axp20x: Add support for AXP192, Aidan MacDonald
- [PATCH v4 07/15] regulator: axp20x: Add support for AXP192, Aidan MacDonald
- [PATCH v4 14/15] power: axp20x_battery: Support battery status without fuel gauge, Aidan MacDonald
- [PATCH v4 11/15] power: supply: axp20x_usb_power: Add support for AXP192, Aidan MacDonald
- [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver, Aidan MacDonald
- [PATCH v4 15/15] power: axp20x_battery: Add support for AXP192, Aidan MacDonald
- [PATCH v4 10/15] iio: adc: axp20x_adc: Add support for AXP192, Aidan MacDonald
- [PATCH v4 13/15] power: axp20x_battery: Add constant charge current table, Aidan MacDonald
- [PATCH v4 09/15] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field, Aidan MacDonald
- [PATCH v4 08/15] iio: adc: axp20x_adc: Minor code cleanups, Aidan MacDonald
- Re: [PATCH v4 00/15] Add support for AXP192 PMIC, Andy Shevchenko
- Re: [PATCH 6/6] i2c: Make remove callback return void,
Uwe Kleine-König
- [PATCH v2 0/2] Add Richtek RTQ6056 support,
cy_huang
[PATCH v5 0/3] adc-joystick: Add polled support,
Chris Morgan
[PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor,
Claudiu Beznea
- [PATCH v2 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel, Claudiu Beznea
- [PATCH v2 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines, Claudiu Beznea
- [PATCH v2 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data, Claudiu Beznea
- [PATCH v2 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume, Claudiu Beznea
- [PATCH v2 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function, Claudiu Beznea
- [PATCH v2 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions, Claudiu Beznea
- [PATCH v2 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw(), Claudiu Beznea
- [PATCH v2 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr, Claudiu Beznea
- [PATCH v2 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function, Claudiu Beznea
- [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support, Claudiu Beznea
- [PATCH v2 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops, Claudiu Beznea
- [PATCH v2 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq, Claudiu Beznea
- [PATCH v2 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor, Claudiu Beznea
- [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch, Claudiu Beznea
- [PATCH v2 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled, Claudiu Beznea
- [PATCH v2 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions, Claudiu Beznea
- [PATCH v2 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio, Claudiu Beznea
- [PATCH v2 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq(), Claudiu Beznea
- [PATCH v2 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX, Claudiu Beznea
- Re: [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor, Jonathan Cameron
[PATCH v7 0/2] AD4130,
Cosmin Tanislav
Dynamically configured channels, overlap with GPIO, encoder support,
Giedrius Trainavičius
[PATCH v6 0/2] AD4130,
Cosmin Tanislav
[PATCH AUTOSEL 5.18 28/53] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability, Sasha Levin
[PATCH v4 0/3] adc-joystick: Add polled support,
Chris Morgan
[PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT,
Jean-Baptiste Maneyrol
[PATCH 0/4] IIO: Some documentation error and warning fixes.,
Jonathan Cameron
[PATCH] iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read(),
Jonathan Cameron
[PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.,
Jonathan Cameron
- [PATCH v3 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads., Jonathan Cameron
- [PATCH v3 06/17] staging: iio: cdc: ad7746: Factor out ad7746_read_channel(), Jonathan Cameron
- [PATCH v3 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI., Jonathan Cameron
- [PATCH v3 04/17] staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace., Jonathan Cameron
- [PATCH v3 01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible, Jonathan Cameron
- [PATCH v3 03/17] staging: iio: cdc: ad7746: Use explicit be24 handling., Jonathan Cameron
- [PATCH v3 07/17] staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw, Jonathan Cameron
- [PATCH v3 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc, Jonathan Cameron
- [PATCH v3 10/17] staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels., Jonathan Cameron
- [PATCH v3 09/17] staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata(), Jonathan Cameron
- [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels, Jonathan Cameron
- [PATCH v3 12/17] staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels., Jonathan Cameron
- [PATCH v3 13/17] staging: iio: cdc: ad7746: Use read_avail() rather than opencoding., Jonathan Cameron
- [PATCH v3 14/17] staging: iio: ad7746: White space cleanup, Jonathan Cameron
- [PATCH v3 15/17] iio: cdc: ad7746: Add device specific ABI documentation., Jonathan Cameron
- [PATCH v3 16/17] iio: cdc: ad7746: Move driver out of staging., Jonathan Cameron
- [PATCH v3 17/17] RFC: iio: cdc: ad7746: Add roadtest, Jonathan Cameron
- Re: [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging., Andy Shevchenko
[PATCH] HID: hid-sensor-hub: Remove unused macros, Akihiko Odaki
[PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380,
Angel Iglesias
[PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family,
Angel Iglesias
[PATCH 1/3] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string,
Angel Iglesias
[PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property,
Marcus Folkesson
- [PATCH v2 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register, Marcus Folkesson
- [PATCH v2 03/10] iio: adc: mcp3911: add support for buffers, Marcus Folkesson
- [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts, Marcus Folkesson
- [PATCH v2 07/10] iio: adc: mcp3911: use correct formula for AD conversion, Marcus Folkesson
- [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA, Marcus Folkesson
- [PATCH v2 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Marcus Folkesson
- [PATCH v2 09/10] iio: adc: mcp3911: make use of the sign bit, Marcus Folkesson
- [PATCH v2 06/10] iio: adc: mcp3911: add support for oversampling ratio, Marcus Folkesson
- [PATCH v2 08/10] iio: adc: mcp3911: add support for phase, Marcus Folkesson
- Re: [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property, Jonathan Cameron
- Re: [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property, Jonathan Cameron
[PATCH] iio/hid: Add mount_matrix,
Gwendal Grignou
[PATCH 1/2] iio: dac: mcp4922: add support to mcp4921,
Kory Maincent
[PATCH] iio: Don't use bare "unsigned",
Joe Simmons-Talbott
[PATCH 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property,
Marcus Folkesson
- [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio, Marcus Folkesson
- [PATCH 07/10] iio: adc: mcp3911: use correct formula for AD conversion, Marcus Folkesson
- [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry, Marcus Folkesson
- [PATCH 04/10] iio: adc: mcp3911: add support for interrupts, Marcus Folkesson
- [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register, Marcus Folkesson
- [PATCH 03/10] iio: adc: mcp3911: add support for buffers, Marcus Folkesson
- [PATCH 08/10] iio: adc: mcp3911: add support for phase, Marcus Folkesson
- [PATCH 09/10] iio: adc: mcp3911: make use of the sign bit, Marcus Folkesson
- [PATCH 10/10] iio: adc: mcp3911: add support to set PGA, Marcus Folkesson
- Re: [PATCH 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property, Andy Shevchenko
[PATCH v3 00/14] Add Mediatek MT6370 PMIC support,
ChiaEn Wu
- [PATCH v3 01/14] dt-bindings: usb: Add Mediatek MT6370 TCPC, ChiaEn Wu
- [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger, ChiaEn Wu
- [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator, ChiaEn Wu
- [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight, ChiaEn Wu
- [PATCH v3 04/14] dt-bindings: leds: Add Mediatek MT6370 flashlight, ChiaEn Wu
- [PATCH v3 06/14] dt-bindings: mfd: Add Mediatek MT6370, ChiaEn Wu
- [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support, ChiaEn Wu
- [PATCH v3 11/14] power: supply: mt6370: Add Mediatek MT6370 charger driver, ChiaEn Wu
- [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver, ChiaEn Wu
- [PATCH v3 10/14] iio: adc: mt6370: Add Mediatek MT6370 support, ChiaEn Wu
- [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support, ChiaEn Wu
- [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support, ChiaEn Wu
- [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support, ChiaEn Wu
- [PATCH v3 13/14] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support, ChiaEn Wu
- Re: (subset) [PATCH v3 00/14] Add Mediatek MT6370 PMIC support, Mark Brown
[PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the',
Jiang Jian
Re: [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the', Jonathan Cameron
[PATCH 00/36] IIO: switch easy cases to new simpler PM related macros.,
Jonathan Cameron
- [PATCH 01/36] iio: accel: bma220: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 02/36] iio: adc: ad799x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 03/36] iio: adc: at91-sam5d2: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 04/36] iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 05/36] iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 06/36] iio: adc: mt6577_auxadc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 07/36] iio: adc: stmpe-adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 08/36] iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 09/36] iio: adc: xilinx-ams: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
- [PATCH 11/36] iio: dac: ds4424: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 10/36] iio: chemical: scd4x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 31/36] iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr(), Jonathan Cameron
[PATCH 24/36] iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 34/36] iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros, Jonathan Cameron
[PATCH 17/36] iio: health: afe4403: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 28/36] iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr(), Jonathan Cameron
[PATCH 23/36] iio: light: cm3605: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 13/36] iio: dac: max517: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 25/36] iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 30/36] iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr(), Jonathan Cameron
[PATCH 26/36] iio: light: us5182: Switch from CONFIG_PM guards to pm_ptr() etc, Jonathan Cameron
[PATCH 20/36] iio: light: al3320a: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 12/36] iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 27/36] iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr(), Jonathan Cameron
[PATCH 19/36] iio: light: al3010: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 16/36] iio: gyro: itg3200: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 21/36] iio: light: as73211: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 18/36] iio: health: afe4404: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 15/36] iio: dac: mcp4725: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 35/36] iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros, Jonathan Cameron
[PATCH 22/36] iio: light: bh1750: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 29/36] iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr(), Jonathan Cameron
[PATCH 33/36] iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros, Jonathan Cameron
[PATCH 14/36] iio: dac: max5821: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(), Jonathan Cameron
[PATCH 36/36] iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros, Jonathan Cameron
[PATCH 32/36] iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros, Jonathan Cameron
Re: [PATCH 00/36] IIO: switch easy cases to new simpler PM related macros., Paul Cercueil
[PATCH] iio: cros: Add cros_ec_sensors_core_register,
Gwendal Grignou
[PATCH] iio:magnetometer:hmc5843: Remove duplicate 'the' in two places.,
Jiang Jian
Questions: IIO type for absorbance and float values in channels?,
Stefan Lengfeld
[PATCH v2 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics,
Andy Shevchenko
[PATCH][next] iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency",
Colin Ian King
[PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line,
Jiang Jian
[PATCH] iio: aligned '*' each line,
Jiang Jian
[PATCH v5 0/2] AD4130,
Cosmin Tanislav
[PATCH 0/2] iio: adc: stm32-adc: add checks on adc state,
Olivier Moysan
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
