> > Some intel-ish/hid-sensor-hub IIO devices always report 0 on
> > synchronous read
>
> Try this:
>
> /sys/bus/platform/device/HID-SENSOR-2000e1.*
>
> cd power
>
> echo on > control
>
>
> Thanks,
> Srinivas
# For the HPD
$ cat input-{6,7,8,9,a,b}-*/*-{value,name} power/*
File: input-6-200544/input-6-200544-value
0
File: input-7-200545/input-7-200545-value
0
File: input-8-200546/input-8-200546-value
0
File: input-9-200547/input-9-200547-value
0
File: input-a-200548/input-a-200548-value
0
File: input-b-200549/input-b-200549-value
0
File: input-6-200544/input-6-200544-name
data-field-custom-value_1
File: input-7-200545/input-7-200545-name
data-field-custom-value_2
File: input-8-200546/input-8-200546-name
data-field-custom-value_3
File: input-9-200547/input-9-200547-name
data-field-custom-value_4
File: input-a-200548/input-a-200548-name
data-field-custom-value_5
File: input-b-200549/input-b-200549-name
data-field-custom-value_6
File: power/autosuspend_delay_ms <EMPTY>
File: power/control
on
File: power/runtime_active_time
0
File: power/runtime_status
unsupported
File: power/runtime_suspended_time
0
# For an IIO
$ cat header-filename power/* in_*_raw
File: power/autosuspend_delay_ms <EMPTY>
File: power/control
on
File: power/runtime_active_time
0
File: power/runtime_status
unsupported
File: power/runtime_suspended_time
0
File: in_illuminance_raw
0
File: in_intensity_both_raw
0
