Hello Jonathan, We are using private GitHub repository and review our projects during Pull Request. We reviewed the MAX11410 Linux driver based on the general correctness, best practices, Linux coding style and IIO Driver implementation. The repository also contains test scripts that we can review the test coverage as well. Best Regards, Nurettin Bolucu Senior MTS, Software - Istanbul Software Design Center Eski Buyukdere Cad. Maslak No.1 6th Floor 34485 Sariyer Istanbul TR Office 90 (212) 952-5168 Mobile 90 (506) 992-7486 Web analog.com -----Original Message----- From: Jonathan Cameron <jic23@xxxxxxxxxx> Sent: Sunday, August 14, 2022 18:56 To: Tilki, Ibrahim <Ibrahim.Tilki@xxxxxxxxxx> Cc: linux-iio@xxxxxxxxxxxxxxx; Sa, Nuno <Nuno.Sa@xxxxxxxxxx>; Bolucu, Nurettin <Nurettin.Bolucu@xxxxxxxxxx> Subject: Re: [PATCH v3 2/2] dt-bindings: iio: adc: add adi,max11410.yaml [External] On Thu, 11 Aug 2022 13:42:43 +0000 Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx> wrote: > Adding devicetree binding documentation for max11410 adc. > > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx> > Reviewed-by: Nurettin Bolucu <Nurettin.Bolucu@xxxxxxxxxx> As a general rule, prefer to see review on list. Whilst Analog folk are usually good at doing reviews properly some other companies have been known to add reviewed-by tags without doing a proper job of review. Hence we prefer to hear from the reviewer on the public list if possible, even if it's a quick note to say what sort of review they have done (general correctness / check against datasheet / detailed subsystem interaction review etc) as that reduces the focus others may put on the same areas. I regularly do this wrong in Huawei code btw as we still do more review before posting than we perhaps should :) A few comments inline. Biggest is the interrupts description needing to be more general to avoid us having problems if we extend it in future to cover the other possible pin. > --- > .../bindings/iio/adc/adi,max11410.yaml | 165 ++++++++++++++++++ > 1 file changed, 165 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml > > diff --git > a/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml > b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml > new file mode 100644 > index 000000000..a782bfcaf > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml > @@ -0,0 +1,165 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2022 > +Analog Devices Inc. > +%YAML 1.2 > +--- > +$id: > +https://urldefense.com/v3/__http://devicetree.org/schemas/iio/adc/adi > +,max11410.yaml*__;Iw!!A3Ni8CS0y2Y!7sok_RjOsQmX2sw37vgNw48j1VkwrSqKY0l > +gDlIAlxYUTh6-mbuZqS6ysSEQcFSTmpRIinW_-cwEpcG7BSg$ > +$schema: > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.y > +aml*__;Iw!!A3Ni8CS0y2Y!7sok_RjOsQmX2sw37vgNw48j1VkwrSqKY0lgDlIAlxYUTh > +6-mbuZqS6ysSEQcFSTmpRIinW_-cwEqTILbNA$ > + > +title: Analog Devices MAX11410 ADC device driver > + > +maintainers: > + - Ibrahim Tilki <ibrahim.tilki@xxxxxxxxxx> > + > +description: | > + Bindings for the Analog Devices MAX11410 ADC device. Datasheet can > +be > + found here: > + https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf > + > +properties: > + compatible: > + enum: > + - adi,max11410 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 There are at least two possible pins, so this binding needs to take into account which one / ones are wired. Hence you need interrupt-names and the driver needs to route things appropriately or at very least give a clear 'I don't support GPIO0 usage' error message. > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + avdd-supply: > + description: Necessarry avdd supply. Used as reference when no explicit reference supplied. > + > + vref0p-supply: > + description: vref0p supply can be used as reference for conversion. > + > + vref1p-supply: > + description: vref1p supply can be used as reference for conversion. > + > + vref2p-supply: > + description: vref2p supply can be used as reference for conversion. > + > + vref0n-supply: > + description: vref0n supply can be used as reference for conversion. > + > + vref1n-supply: > + description: vref1n supply can be used as reference for conversion. > + > + vref2n-supply: > + description: vref2n supply can be used as reference for conversion. > + > + spi-max-frequency: > + maximum: 8000000 > + > +required: > + - compatible > + - reg > + - avdd-supply > + > +patternProperties: > + "^channel(@[0-9a-f]+)?$": > + $ref: "adc.yaml" > + type: object > + description: Represents the external channels which are connected to the ADC. > + > + properties: > + reg: > + description: The channel number in single-ended mode. > + minimum: 0 > + maximum: 10 the @ address seems to allow more than 0 to 10. Perhaps need to bring those inline and make them both hex? Curious. What's the 11th channel if max isn't 9? > + > + adi,reference: > + description: | > + Select the reference source to use when converting on > + the specific channel. Valid values are: > + 0: VREF0P/VREF0N > + 1: VREF1P/VREF1N > + 2: VREF2P/VREF2N > + 3: AVDD/AGND > + 4: VREF0P/AGND > + 5: VREF1P/AGND > + 6: VREF2P/AGND > + If this field is left empty, AVDD/AGND is selected. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2, 3, 4, 5, 6] > + default: 3 > + > + adi,input-mode: > + description: | > + Select signal path of input channels. When PGA path is selected, > + hardwaregain property is enabled for channel. Valid values are: A binding should not mention details of what the linux driver is doing, so drop that bit about hardwaregain. Whilst bindings exist in the Linux tree they are used by various other bits of software. > + 0: Buffered, low-power, unity-gain path (default) > + 1: Bypass path > + 2: PGA path > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2] > + default: 0 > + > + diff-channels: true > + > + bipolar: true > + > + settling-time-us: true > + > + adi,buffered-vrefp: > + description: Enable buffered mode for positive reference. > + type: boolean > + > + adi,buffered-vrefn: > + description: Enable buffered mode for negative reference. > + type: boolean > + > + required: > + - reg > + > + additionalProperties: false > + > +additionalProperties: false > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,max11410"; > + reg = <0>; > + spi-max-frequency = <8000000>; > + interrupts = <25 2>; > + interrupt-parent = <&gpio>; > + > + avdd-supply = <&adc_avdd>; > + > + vref1p-supply = <&adc_vref1p>; > + vref1n-supply = <&adc_vref1n>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { > + reg = <0>; > + }; > + > + channel@1 { > + reg = <1>; > + diff-channels = <2 3>; > + adi,reference = <1>; > + bipolar; > + settling-time-us = <100000>; > + }; > + > + channel@2 { > + reg = <2>; > + diff-channels = <7 9>; > + adi,reference = <5>; > + adi,input-mode = <2>; > + settling-time-us = <50000>; > + }; > + }; > + };
