Re: [PATCH v8 3/5] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 19 Aug 2022 00:18:13 +0200
Robert Marko <robimarko@xxxxxxxxx> wrote:

> Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list.
> This channel measures the VADC reference LDO output.
> 
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

I've changed my mind on this, mostly because we've reached a new
cycle and I'd rather not see a v9 series + Lee is (I think)
keen to only take stuff through MFD if there is a build time
dependency.

Applied this patch directly to the togreg branch of iio.git
and pushed that out as testing for 0-day to play with it.
> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index e96da2ef1964..821fee60a765 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -597,6 +597,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
>  					SCALE_HW_CALIB_DEFAULT)
> +	[ADC5_VREF_VADC]	= ADC5_CHAN_VOLT("vref_vadc", 0,
> +					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux