BMG160 has two interrupt pins to which interrupts can be freely mapped. Correct the schema to express such case and fix warnings like: qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long However the basic issue still persists - the interrupts should come in a defined order. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes since v1: 1. Accept also INT2 as one interrupt (Jonathan). --- .../devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index b6bbc312a7cf..1414ba9977c1 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -24,8 +24,10 @@ properties: interrupts: minItems: 1 + maxItems: 2 description: Should be configured with type IRQ_TYPE_EDGE_RISING. + If two interrupts are provided, expected order is INT1 and INT2. required: - compatible -- 2.34.1