On Mon, Jul 25, 2022 at 4:00 PM Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote: > ... > > > +#define MT6370_REG_DEV_INFO 0x100 > > +#define MT6370_REG_CHG_IRQ1 0x1C0 > > +#define MT6370_REG_CHG_MASK1 0x1E0 > > + > > +#define MT6370_VENID_MASK GENMASK(7, 4) > > + > > +#define MT6370_NUM_IRQREGS 16 > > +#define MT6370_USBC_I2CADDR 0x4E > > > +#define MT6370_REG_ADDRLEN 2 > > +#define MT6370_REG_MAXADDR 0x1FF > > These two more logically to have near to other _REG_* definitions above. Hi Andy, Thanks for your review. Do you mean that we should move '#define MT6370_USBC_I2CADDR' and '#define MT6370_REG_MAXADDR' after the line '#define MT6370_REG_CHG_MASK1'? ------------------------------------------------------------------- #define MT6370_REG_DEV_INFO 0x100 #define MT6370_REG_CHG_IRQ1 0x1C0 #define MT6370_REG_CHG_MASK1 0x1E0 #define MT6370_USBC_I2CADDR 0x4E #define MT6370_REG_MAXADDR 0x1FF #define MT6370_VENID_MASK GENMASK(7, 4) #define MT6370_NUM_IRQREGS 16 #define MT6370_REG_ADDRLEN 2 ------------------------------------------------------------------- Like this? > > -- > With Best Regards, > Andy Shevchenko -- Best Regards, ChiaEn Wu