[PATCH v3 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



.read_raw()/.write_raw() could be called asynchronously from user space
or other in kernel drivers. Without locking on st->lock these could be
called asynchronously while there is a conversion in progress. Read will
be harmless but changing registers while conversion is in progress may
lead to inconsistent results. Thus, to avoid this lock st->lock.

Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver")
Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 08d1f806c839..3734ddc82952 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1542,10 +1542,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 		ret = at91_adc_read_position(st, chan->channel,
 					     &tmp_val);
 		*val = tmp_val;
-		mutex_unlock(&st->lock);
-		iio_device_release_direct_mode(indio_dev);
 		if (ret > 0)
 			ret = at91_adc_adjust_val_osr(st, val);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
 
 		return ret;
 	}
@@ -1558,10 +1558,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
 		ret = at91_adc_read_pressure(st, chan->channel,
 					     &tmp_val);
 		*val = tmp_val;
-		mutex_unlock(&st->lock);
-		iio_device_release_direct_mode(indio_dev);
 		if (ret > 0)
 			ret = at91_adc_adjust_val_osr(st, val);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
 
 		return ret;
 	}
@@ -1650,16 +1650,20 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
 		/* if no change, optimize out */
 		if (val == st->oversampling_ratio)
 			return 0;
+		mutex_lock(&st->lock);
 		st->oversampling_ratio = val;
 		/* update ratio */
 		at91_adc_config_emr(st);
+		mutex_unlock(&st->lock);
 		return 0;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		if (val < st->soc_info.min_sample_rate ||
 		    val > st->soc_info.max_sample_rate)
 			return -EINVAL;
 
+		mutex_lock(&st->lock);
 		at91_adc_setup_samp_freq(indio_dev, val);
+		mutex_unlock(&st->lock);
 		return 0;
 	default:
 		return -EINVAL;
-- 
2.34.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux