[PATCH v10 0/2] Add LTRF216A Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset adds support for ltrf216a Ambient Light Sensor
and documents the DT bindings for the same.

Changes in v10
  - Handle !CONFIG_PM scenario similar to how other IIO drivers
    do it.
  - Fix kernel test robot warning.

Changes in v9
  - Add LTRF216A_MAIN_STATUS register in volatile function.
  - Update the datasheet link.

Changes in v8
  - Add caching mechanism to restore register state after h/w resume.
  - Add callback functions and disable locking in regmap config.
  - Update mutex comment as per it's current scope in the driver.
  - Add Shreeya as author of the driver.
  - Make some minor cleanups.

Changes in v7
  - Add regmap support.
  - Fix runtime power management implementation.
  - Fix the ordering of devm and non-devm functions.
  - Use DEFINE_RUNTIME_DEV_PM_OPS macro
  - Fix the error reported by kernel test robot for bindings.

Changes in v6
  - Fix some errors reported by kernel test robot.
  - Add protocol details for the datasheet link.
  - Remove useless assignments.
  - Add unit details for read data delay macro.
  - Use pm_sleep_ptr().

Changes in v5
  - Add power management support.
  - Add reset functionality.
  - Use readx_poll_timeout() to get data.
  - Cleanup some of the redundant code.
  - Update int_time_fac after I2C write is successful.
  - Rename mutex to lock.
  - Use Reverse Xmas tree pattern for all variable definitions.
  - Improve error handling messages and add error codes.
  - Add one more MODULE_AUTHOR.
  - Remove cleardata which was reading data for infrared light.
  - Remove patch for deprecated vendor prefix [PATCH v4 3/3].
  - Remove deprecated string from DT binding document.

Changes in v4
  - Add more descriptive comment for mutex lock
  - Fix mutex locking in read_raw()
  - Use i2c_smbus_read_i2c_block_data()

Changes in v3
  - Use u16 instead of u8 for int_time_fac
  - Reorder headers in ltrf216a.c file
  - Remove int_time_mapping table and use int_time_available
  - Fix indentation in the bindings file.

Changes in v2
  - Add support for 25ms and 50ms integration time.
  - Rename some of the macros as per names given in datasheet
  - Add a comment for the mutex lock
  - Use read_avail callback instead of attributes and set the
    appropriate _available bit.
  - Use FIELD_PREP() at appropriate places.
  - Add a constant lookup table for integration time and reg val
  - Use BIT() macro for magic numbers.
  - Improve error handling at few places.
  - Use get_unaligned_le24() and div_u64()
  - Use probe_new() callback and devm functions
  - Return errors in probe using dev_err_probe()
  - Use DEFINE_SIMPLE_DEV_PM_OPS()
  - Correct the formula for lux to use 0.45 instead of 0.8
  - Add interrupt and power supply property in DT bindings
  - Add vendor prefix name as per the alphabetical order.


Shreeya Patel (2):
  dt-bindings: Document ltrf216a light sensor bindings
  iio: light: Add support for ltrf216a sensor

 .../bindings/iio/light/liteon,ltrf216a.yaml   |  49 ++
 drivers/iio/light/Kconfig                     |  11 +
 drivers/iio/light/Makefile                    |   1 +
 drivers/iio/light/ltrf216a.c                  | 537 ++++++++++++++++++
 4 files changed, 598 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
 create mode 100644 drivers/iio/light/ltrf216a.c

-- 
2.30.2




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux