This series adds initial support for the PM6125 PMIC, and its power key handling and thermal monitoring capabilities are configured for Sony's PDX201 (Xperia 10II). One patch for pm660 is included to fix a node address mismatch with its reg field. Note that this series has been based on top of: https://lore.kernel.org/linux-arm-msm/20220508100336.127176-1-marijn.suijten@xxxxxxxxxxxxxx/T/#u To prevent conflicts with the moving around of sdc2 nodes, presuming that series is applied first. All dts patches are expected to go through the QCOM DTS tree, whereas the sole iio patch goes through the IIO tree. Changes since v1: - Dropped both pinctrl patches that have already been applied; - Add -us suffix to qcom,hw-settle-time properties on ADC TM5 nodes (this suffix is not present on regular ADC5/VADC nodes); - Add -state suffix to pm6125_gpio pinctrl nodes; - Use PMIC_GPIO_FUNC_NORMAL instead of the string-literal "normal"; - Removed #address-cells and #size-cells from empty pmic@1 node; - Removed ADC5_AMUX_THM3 / ADC5_GPIO2_100K_PU channels from the ADC5 patch, these are unused on my board and hence untested. v1: https://lore.kernel.org/phone-devel/20220511220613.1015472-1-marijn.suijten@xxxxxxxxxxxxxx/T/#u Marijn Suijten (5): arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels arm64: dts: qcom: Add PM6125 PMIC arm64: dts: qcom: sm6125-seine: Include PM6125 and configure PON arm64: dts: qcom: sm6125-seine: Configure additional trinket thermistors arch/arm64/boot/dts/qcom/pm6125.dtsi | 154 +++++++++++++++++ arch/arm64/boot/dts/qcom/pm660.dtsi | 2 +- .../qcom/sm6125-sony-xperia-seine-pdx201.dts | 162 +++++++++++++++++- drivers/iio/adc/qcom-spmi-adc5.c | 8 + 4 files changed, 324 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/pm6125.dtsi -- 2.37.1
