On Fri, 30 Jun 2017 19:42:54 +0200
Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> Inheriting the ADC BIAS current settings from the BIOS instead of
> hardcoding then causes the AXP288 to disable charging (I think it
> mis-detects an overheated battery) on at least one model tablet.
>
> So lets go back to hard coding the values, this reverts
> commit fa2849e9649b ("iio: adc: axp288: Drop bogus
> AXP288_ADC_TS_PIN_CTRL register modifications"), fixing charging not
> working on the model tablet in question.
Given the original patch description, I'm a little worried we are
changing too much by doing a straight forward revert.
Should we be addressing just the relevant bit related to the
thermal sensor instead?
I suppose the revert is the low risk option, but I would really
like a slightly better understanding of what is going on here if
possible.
Given the timing, we aren't going to get a fix in before the merge
window - so chances are we are looking at rc1 to rc2 timescales
and have a bit of time to perhaps pin down what is happening here
a little better.
Jonathan
>
> Cc: stable@xxxxxxxxxxxxxxx
> Reported-by: Umberto Ixxo <sfumato1977@xxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> drivers/iio/adc/axp288_adc.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
> index 64799ad7ebad..7fd24949c0c1 100644
> --- a/drivers/iio/adc/axp288_adc.c
> +++ b/drivers/iio/adc/axp288_adc.c
> @@ -28,6 +28,8 @@
> #include <linux/iio/driver.h>
>
> #define AXP288_ADC_EN_MASK 0xF1
> +#define AXP288_ADC_TS_PIN_GPADC 0xF2
> +#define AXP288_ADC_TS_PIN_ON 0xF3
>
> enum axp288_adc_id {
> AXP288_ADC_TS,
> @@ -121,6 +123,16 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
> return IIO_VAL_INT;
> }
>
> +static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
> + unsigned long address)
> +{
> + /* channels other than GPADC do not need to switch TS pin */
> + if (address != AXP288_GP_ADC_H)
> + return 0;
> +
> + return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
> +}
> +
> static int axp288_adc_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> @@ -131,7 +143,16 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
> mutex_lock(&indio_dev->mlock);
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
> + chan->address)) {
> + dev_err(&indio_dev->dev, "GPADC mode\n");
> + ret = -EINVAL;
> + break;
> + }
> ret = axp288_adc_read_channel(val, chan->address, info->regmap);
> + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
> + chan->address))
> + dev_err(&indio_dev->dev, "TS pin restore\n");
> break;
> default:
> ret = -EINVAL;
> @@ -141,6 +162,15 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
> return ret;
> }
>
> +static int axp288_adc_set_state(struct regmap *regmap)
> +{
> + /* ADC should be always enabled for internal FG to function */
> + if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
> + return -EIO;
> +
> + return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
> +}
> +
> static const struct iio_info axp288_adc_iio_info = {
> .read_raw = &axp288_adc_read_raw,
> .driver_module = THIS_MODULE,
> @@ -169,7 +199,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
> * Set ADC to enabled state at all time, including system suspend.
> * otherwise internal fuel gauge functionality may be affected.
> */
> - ret = regmap_write(info->regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
> + ret = axp288_adc_set_state(axp20x->regmap);
> if (ret) {
> dev_err(&pdev->dev, "unable to enable ADC device\n");
> return ret;
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
