Linux IIO Development
[Prev Page][Next Page]
- Re: [PATCH] iio: adc: rockchip_saradc: Explicitly disable ADC on probe
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] iio: adc: rockchip_saradc: Explicitly disable ADC on probe
- From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
- [PATCH] iio: orientation: Add BNO055 9-axis Absolute Orientation Sensor driver
- From: navin patidar <navin.patidar@xxxxxxxxx>
- [PATCH] iio: ad5755: fix off-by-one on devnr limit check
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- [PATCH] iio: chemical: atlas-ph-sensor: fix typo in val assignment
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH] iio: adc: rockchip_saradc: Explicitly disable ADC on probe
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH] iio: adc: rockchip_saradc: Explicitly disable ADC on probe
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2] iio: accel: bma180: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH v2] iio: humidity: hdc100x: add HDC1000 and HDC1008 to Kconfig
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH v4 1/1] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 0/1] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v2 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
- From: Guenter Roeck <groeck@xxxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v2 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd.
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- [PATCH v2 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- [PATCH v2 0/2] Add driver for Domintech DMARD06 accelerometer
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- [PATCH v3 1/1] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v3 0/1] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH] iio: document bindings for mounting matrixes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 2/2 v5] iio: magn: add a driver for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2 v5] iio: magn: DT bindings for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: document bindings for mounting matrixes
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [PATCH] iio: stx104: Store channel output state values as int
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 2/2] staging: iio: vcnl4000: Replace i2c api's with regmap
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- [PATCH v2 1/2] staging: iio: vcnl4000: Add IR current adjust support
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- Re: [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: maxime.ripard@xxxxxxxxxxxxxxxxxx
- Re: [PATCH] iio: document bindings for mounting matrixes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] hwmon: sht3x: set initial jiffies to last_update
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v2 1/4] iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- Re: [RFC v2] regmap: Add regmap_pipe_read API
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: vcnl4000: Replace i2c api's with regmap
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- [PATCH v3 5/9] hwmon: (core) Add power attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 9/9] hwmon: (core) Add basic pwm attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 2/9] hwmon: (core) New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 8/9] hwmon: (core) Document new kernel API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 6/9] hwmon: (core) Add energy and humidity attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 4/9] hwmon: (core) Add current attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 0/9] hwmon: New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 3/9] hwmon: (core) Add voltage attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 7/9] hwmon: (core) Add fan attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 1/9] hwmon: (core) Order include files alphabetically
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 2/9] hwmon: (core) New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] hwmon: sht3x: set initial jiffies to last_update
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v2] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 8/9] hwmon: (core) Document new kernel API
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/9] hwmon: (core) New hwmon registration API
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: document bindings for mounting matrixes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: magn: add a driver for AK8974
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: magn: add a driver for AK8974
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v2] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH v2] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jelle van der Waa <jelle@xxxxxxxx>
- Re: [PATCH v2 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/4] iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: add Kconfig selects needed for triggered buffer compiles
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: stx104: Move the STX104 IIO driver to the ADC directory
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: stx104: Unregister IIO device on remove callback
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: stx104: Add IIO support for the ADC channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: stx104: Store channel output state values as int
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Some advice required for IIO driver (cm3218)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Some advice required for IIO driver (cm3218)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: Add IIO support for the Measurement Computing CIO-DAC family
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: temperature: mcp9808: add Microchip MCP9808 temperature sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: proximity: as3935: set up buffer timestamps for non-zero values
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: humidity: am2315: set up buffer timestamps for non-zero values
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: accel: bma220_spi: set up buffer timestamps for non-zero values
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ad7298: use iio helper function to guarantee direct mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ad7793: use iio helper function to guarantee direct mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: bma180: use iio helper function to guarantee direct mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: resource managed pollfunc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Fwd: [PATCH] iio: accel: kxcjk-1013: add the "KIOX000A" ACPI id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/5] iio: adc: sunxi-gpadc-iio: enable iio_buffers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] mfd: sunxi-gpadc-mfd: add buffer structure
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: vcnl4000: Replace i2c api's with regmap
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: document bindings for mounting matrixes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] staging: iio: vcnl4000: Add IR current adjust support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: ad5933: Return correct value for AD5933_OUT_RANGE.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: magn: add a driver for AK8974
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: dac: ad5380: Fix probe failure when no external reference is supplied
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v4] iio: magn: add a driver for AK8974
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: magn: DT bindings for AK8974
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 2/2 v4] iio: magn: add a driver for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2] iio: magn: DT bindings for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- Re: How to support multiple chips in single driver
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: How to support multiple chips in single driver
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- Re: [PATCH v2] iio: dac: ad5380: Fix probe failure when no external reference is supplied
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: How to support multiple chips in single driver
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- How to support multiple chips in single driver
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- Re: [PATCH -next] iio: pressure: bmp280: fix wrong pointer passed to PTR_ERR()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: ADS1118: hwmon or iio ? [was: Re: [RCF 1/3] hwmon: Add ads1118 driver]
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RCF 1/3] hwmon: Add ads1118 driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: humidity: hdc100x: add triggered buffer support for HDC100X
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- ADS1118: hwmon or iio ? [was: Re: [RCF 1/3] hwmon: Add ads1118 driver]
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/2 v3] iio: magn: add a driver for AK8974
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 2/2 v3] iio: magn: add a driver for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] iio: humidity: hdc100x: add triggered buffer support for HDC100X
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [RCF 1/3] hwmon: Add ads1118 driver
- From: Joshua Clayton <stillcompiling@xxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH -next] iio: pressure: bmp280: fix wrong pointer passed to PTR_ERR()
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2] iio: humidity: hdc100x: add triggered buffer support for HDC100X
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.
- From: zhiyong tao <zhiyong.tao@xxxxxxxxxxxx>
- [RFC] iio: imu: mm7150: Add support for MM7150
- From: Lucas Magasweran <lucas.magasweran@xxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd.
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: add triggered buffer support for HDC100X
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH 2/2] iio: accel: Add support for Domintech DMARD06 accelerometer
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- [PATCH 1/2] devicetree: bindings: Add vendor prefix for Domintech Co., Ltd.
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- [PATCH 0/2] Add driver for Domintech DMARD06 accelerometer
- From: Aleksei Mamlin <mamlinav@xxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH] iio: humidity: hdc100x: add triggered buffer support for HDC100X
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH] staging: iio: ad5933: Return correct value for AD5933_OUT_RANGE.
- From: Phil Turnbull <phil.turnbull@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- [PATCH 2/2] staging: iio: vcnl4000: Replace i2c api's with regmap
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- [PATCH 1/2] staging: iio: vcnl4000: Add IR current adjust support
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v5 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v5 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v5 0/3] AUXADC: Mediatek auxadc driver
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v5 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v5 3/3] arm: dts: mt2701: Add auxadc node.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 02/10] mfd: cros_ec: update MOTIONSENSE definitions and commands.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2 v3] iio: magn: add a driver for AK8974
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: How to set Current register in IIO driver from sysfs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/5] hwmon: New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 0/5] hwmon: New hwmon registration API
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/4] iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH v2 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH v2 4/4] platform/chrome: cros_ec_dev - Register cros-ec sensors
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH v2 3/4] platform/chrome: Introduce a new function to check EC features.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH v2 0/4] Add support for cros-ec-sensors
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- Re: [PATCH 3/5] iio: adc: sunxi-gpadc-iio: enable iio_buffers
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] iio: adc: sunxi-gpadc-iio: enable iio_buffers
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 1/5] mfd: sunxi-gpadc-mfd: add TP_UP_PENDING irq
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/5] iio: adc: sunxi-gpadc-iio: enable iio_buffers
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/5] add resistive touchscreen support for new Allwinner SoCs' GPADC's driver
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/5] mfd: sunxi-gpadc-mfd: add buffer structure
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 04/10] iio: cros_ec: Add common functions for cros_ec sensors.
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 04/10] iio: cros_ec: Add common functions for cros_ec sensors.
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- Re: [lkp] [PATCH v2 2/9] hwmon: (core) New hwmon registration API
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- Re: Fwd: [PATCH] iio: accel: kxcjk-1013: add the "KIOX000A" ACPI id
- From: Christophe Chapuis <chris.chapuis@xxxxxxxxx>
- Re: [PATCH v4 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: zhiyong tao <zhiyong.tao@xxxxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: zhiyong tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH] iio: accel: bma180: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 02/10] mfd: cros_ec: update MOTIONSENSE definitions and commands.
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- [PATCH v2 3/3] iio: stx104: Move the STX104 IIO driver to the ADC directory
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 2/3] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v2 1/3] iio: stx104: Unregister IIO device on remove callback
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH v2 0/3] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: Fwd: [PATCH] iio: accel: kxcjk-1013: add the "KIOX000A" ACPI id
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: Fwd: [PATCH] iio: accel: kxcjk-1013: add the "KIOX000A" ACPI id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- resource managed pollfunc
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Fwd: [PATCH] iio: accel: kxcjk-1013: add the "KIOX000A" ACPI id
- From: Christophe Chapuis <chris.chapuis@xxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2] iio: dac: ad5380: Fix probe failure when no external reference is supplied
- From: Paweł Grudziński <pgrudzinski@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: sun4i_lradc: new driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 04/10] iio: cros_ec: Add common functions for cros_ec sensors.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 05/10] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 06/10] iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity Sensors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 08/10] iio: cros_ec_sensors_ring: add ChromeOS EC Sensors Ring
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 07/10] iio: cros_ec_activity: add ChromeOS EC Activity Sensors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 03/10] iio: core: Add double tap as possible gesture
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 02/10] mfd: cros_ec: update MOTIONSENSE definitions and commands.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 01/10] mfd: cros_ec: add ChromeOS EC sensor platform information.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: add Kconfig selects needed for triggered buffer compiles
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH 2/2] iio: stx104: Move the STX104 IIO driver to the ADC directory
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jelle van der Waa <jelle@xxxxxxxx>
- [PATCH v2] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jelle van der Waa <jelle@xxxxxxxx>
- Re: [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH] iio: adc: ad7793: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH] iio: adc: ad7298: use iio helper function to guarantee direct mode
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH 1/1] iio: vcnl4000: Add IR current adjust support
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- [PATCH 2/2] iio: stx104: Move the STX104 IIO driver to the ADC directory
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH 1/2] iio: stx104: Add IIO support for the ADC channels
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [v2,1/4] hwmon: iio_hwmon: defer probe when no channel is found
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [v2,1/4] hwmon: iio_hwmon: defer probe when no channel is found
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: sun4i_lradc: new driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 04/10] iio: cros_ec: Add common functions for cros_ec sensors.
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 03/10] iio: core: Add double tap as possible gesture
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 04/10] iio: cros_ec: Add common functions for cros_ec sensors.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 02/10] mfd: cros_ec: update MOTIONSENSE definitions and commands.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 05/10] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 08/10] iio: cros_ec_sensors_ring: add ChromeOS EC Sensors Ring
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 09/10] platform/chrome: Introduce a new function to check EC features.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 10/10] platform/chrome: cros_ec_dev - Register cros-ec sensors
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 07/10] iio: cros_ec_activity: add ChromeOS EC Activity Sensors
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 06/10] iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity Sensors
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 01/10] mfd: cros_ec: add ChromeOS EC sensor platform information.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH 00/10] Add support for cros-ec-sensors
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- Re: [PATCH] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v2 9/9] hwmon: (core) Add basic pwm attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 3/9] hwmon: (core) Add voltage attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 7/9] hwmon: (core) Add fan attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 0/9] hwmon: New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 6/9] hwmon: (core) Add energy and humidity attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 2/9] hwmon: (core) New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 8/9] hwmon: (core) Document new kernel API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 5/9] hwmon: (core) Add power attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 1/9] hwmon: (core) Order include files alphabetically
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 4/9] hwmon: (core) Add current attribute support to new API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] input: adc-keys: add DT binding documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
- From: Jelle van der Waa <jelle@xxxxxxxx>
- [PATCH] Add support for the Domintech DMARD09 3-axis accelerometer
- From: Jelle van der Waa <jelle@xxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [v2,1/4] hwmon: iio_hwmon: defer probe when no channel is found
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: humidity: hdc100x: move lock on config updates to single function
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [RCF 1/3] hwmon: Add ads1118 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 2/4] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/4] hwmon: iio_hwmon: defer probe when no channel is found
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/4] mfd: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 4/4] hwmon: iio: add label for channels read by iio_hwmon
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/4] add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH -next] iio: pressure: bmp280: fix wrong pointer passed to PTR_ERR()
- Re: [PATCH] iio: ad5380: Fix probe failure when no external reference is supplied
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PULL] Third round of new device support, features and cleanups for IIO in the 4.8 cycle.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] iio: ad5380: Fix probe failure when no external reference is supplied
- From: Paweł Grudziński <pgrudzinski@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/6] Intel Integrated Sensor Hub Support (ISH)
- From: Atri Bhattacharya <badshah400@xxxxxxx>
- [PATCH] iio: stx104: Store channel output state values as int
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v3 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: sun4i-lradc: Add binding documentation
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] input: add ADC resistor ladder driver
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v4 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 2/2] input: add ADC resistor ladder driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 2/2] input: add ADC resistor ladder driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/2] iio: adc: sun4i_lradc: new driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] iio: sun4i-lradc: Add binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2 v3] iio: magn: add a driver for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2] iio: magn: DT bindings for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2] iio: Add IIO support for the Measurement Computing CIO-DAC family
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: zhiyong tao <zhiyong.tao@xxxxxxxxxxxx>
- Re: [PATCH] iio: temperature: mcp9808: add Microchip MCP9808 temperature sensor
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH] iio: Add IIO support for the Measurement Computing CIO-DAC family
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH] iio: Add IIO support for the Measurement Computing CIO-DAC family
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH] iio: Add IIO support for the Measurement Computing CIO-DAC family
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- RE: [PATCH 2/3] iio: humidity: am2315: set up buffer timestamps for non-zero values
- From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
- RE: [PATCH 1/3] iio: accel: bma220_spi: set up buffer timestamps for non-zero values
- From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
- [PATCH 3/3] iio: proximity: as3935: set up buffer timestamps for non-zero values
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 2/3] iio: humidity: am2315: set up buffer timestamps for non-zero values
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 1/3] iio: accel: bma220_spi: set up buffer timestamps for non-zero values
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 0/3] iio: complete the setup of buffer timestamps
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH] iio: sw-trigger: Fix config group initialization
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH] iio: sw-trigger: Fix config group initialization
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH] iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: How to set Current register in IIO driver from sysfs
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- Re: Some advice required for IIO driver (cm3218)
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: Some advice required for IIO driver (cm3218)
- From: Leigh Brown <leigh@xxxxxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v4 2/3] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v4 0/3] AUXADC: Mediatek auxadc driver
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v4 3/3] arm: dts: mt2701: Add auxadc node.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v3 2/2] iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v3 0/2] AUXADC: Mediatek auxadc driver
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- Re: [PATCH 1/7] hwmon: (core) New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 0/5] hwmon: New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH 2/2] iio: humidity: hdc100x: remove lock on heater configuration read
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 1/2] iio: humidity: hdc100x: move lock on config updates to single function
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- [PATCH 0/2] iio: humidity: hdc100x: update driver locking
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH 0/5] hwmon: New hwmon registration API
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 7/7] hwmon: (core) Document new kernel API
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/7] hwmon: (core) New hwmon registration API
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Some advice required for IIO driver (cm3218)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] input: adc-keys: add DT binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] input: add ADC resistor ladder driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: How to set Current register in IIO driver from sysfs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Intel Integrated Sensor Hub Support (ISH)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2 v2] iio: magn: add a driver for AK8974
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/9] staging: iio: isl29018 and isl29028 cleanup
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6] iio: temperature: add support for Maxim thermocouple chips
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/4] iio: light: vcnl4000: Add missing locking
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: light: vcnl4000: Cleanup read_raw() returns
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/4] iio: light: vcnl4000: Use BIT() macro
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/4] iio: light: vcnl4000: Mention and check support for VCNL4010 and VCNL4020
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6] iio: temperature: add support for Maxim thermocouple chips
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: temperature: mcp9808: add Microchip MCP9808 temperature sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: How to set Current register in IIO driver from sysfs
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- How to set Current register in IIO driver from sysfs
- From: Pratik Prajapati <pratik.prajapati12@xxxxxxxxx>
- [PATCH v2 2/2] input: add ADC resistor ladder driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] hwmon: New hwmon registration API
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 0/5] hwmon: New hwmon registration API
- From: Punit Agrawal <punit.agrawal@xxxxxxx>
- Re: [PATCH v3 0/6] Intel Integrated Sensor Hub Support (ISH)
- From: Atri Bhattacharya <badshah400@xxxxxxx>
- [PATCH v3 6/6] hid: hid-sensor-hub: Add ISH quirk
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH v3 5/6] iio: hid-sensors: use asynchronous resume
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH v3 4/6] hid: intel-ish-hid: ISH HID client driver
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH v3 3/6] hid: intel-ish-hid: ipc layer
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH v3 1/6] Documentation: hid: Intel ISH HID document
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH v3 0/6] Intel Integrated Sensor Hub Support (ISH)
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH v1] drivers:iio:accel:mma8452: removed unwanted return statements
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Some advice required for IIO driver (cm3218)
- From: Leigh Brown <leigh@xxxxxxxxxxxxx>
- IIO: May well be it for the 4.8 merge window.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PULL] Third round of new device support, features and cleanups for IIO in the 4.8 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: adc: max1363: Add device tree binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1] drivers:iio:accel:mma8452: added cleanup provision in case of failure.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1] drivers:iio:accel:mma8452: removed unwanted return statements
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1] drivers:iio:accel:mma8452: added cleanup provision in case of failure.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 2/2] iio: potentiostat: add LMP91000 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 2/2] iio: potentiostat: add LMP91000 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 1/2] iio: adc: ti-adc1x1s: add support for TI 1-channel differential ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 1/2] iio: adc: ti-adc1x1s: add support for TI 1-channel differential ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2 v2] iio: magn: DT bindings for AK8974
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 3/3] ARM:dts-Add dt node for Broadcom iproc-static-adc
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH 1/2] input: adc-keys: add DT binding documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 10/10 v4] iio: pressure: bmp280: read calibration data once
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 7/7] iio:st_pressure: clean useless static channel initializers
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 0/6] Intel Integrated Sensor Hub Support (ISH)
- From: Grant Likely <glikely@xxxxxxxxxxxx>
- [PATCH 7/9] staging: iio: isl29028: Prefix stuff
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 9/9] staging: iio: isl29028: Prefix functions
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 6/9] staging: iio: isl29028: Prefix #defines
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 5/9] staging: iio: isl29018: Prefix remaining functions
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 8/9] staging: iio: isl29028: Expose scale and sample frequency available without comma
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 2/9] staging: iio: isl29018: Remove excessive output messages
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 4/9] staging: iio: isl29018: Cleanup of comments
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 0/9] staging: iio: isl29018 and isl29028 cleanup
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 1/9] staging: iio: isl29018: Prefix #defines
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 3/9] staging: iio: isl29018: Drop newlines
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 0/4] iio: light: vcnl4000: cleanup and fixes
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 1/4] iio: light: vcnl4000: Mention and check support for VCNL4010 and VCNL4020
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 3/4] iio: light: vcnl4000: Cleanup read_raw() returns
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 2/4] iio: light: vcnl4000: Use BIT() macro
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 4/4] iio: light: vcnl4000: Add missing locking
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v2 2/3] auxadc: Add Mediatek auxadc driver for mt2701.
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: auxadc: Add binding document for Mediatek auxadc.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v2 3/3] arm: dts: auxadc: Add auxadc node.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v2 2/3] auxadc: Add Mediatek auxadc driver for mt2701.
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v2 0/3] AUXADC: Mediatek auxadc driver
- From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
- [PATCH v6] iio: temperature: add support for Maxim thermocouple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v5] iio: temperature: add support for Maxim thermocouple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH] iio: Add iio.git tree to MAINTAINERS
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 7/7] iio:st_pressure: clean useless static channel initializers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 6/7] iio:st_pressure:lps22hb: temperature support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 5/7] iio:st_pressure:lps22hb: open drain support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/7] iio:st_pressure: temperature triggered buffering
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/7] iio:st_pressure: align storagebits on power of 2
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/7] iio:st_sensors: align on storagebits boundaries
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 3/3] ARM:dts-Add dt node for Broadcom iproc-static-adc
- From: Scott Branden <scott.branden@xxxxxxxxxxxx>
- Re: [PATCH 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: sun4i_lradc: new driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1] drivers:iio:accel:mma8452: added cleanup provision in case of failure.
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v1] drivers:iio:accel:mma8452: removed unwanted return statements
- From: Martin Kepplinger <martink@xxxxxxxxx>
- [PATCH 2/2 v2] iio: magn: add a driver for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2 v2] iio: magn: DT bindings for AK8974
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 0/7] iio:st_pressure: improvements
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Florian Vaussard <florian.vaussard@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: adc: max1363: Add device tree binding documentation
- From: Florian Vaussard <florian.vaussard@xxxxxxxxxx>
- Re: [PATCH v5] iio: temperature: add support for Maxim thermocouple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 1/2] iio: adc: ti-adc1x1s: add support for TI 1-channel differential ADCs
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 2/2] iio: potentiostat: add LMP91000 support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 2/2] iio: potentiostat: add LMP91000 support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 1/2] iio: adc: ti-adc1x1s: add support for TI 1-channel differential ADCs
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] iio: temperature: mcp9808: add Microchip MCP9808 temperature sensor
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] staging:iio:lis3l02dq drop separate driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] staging:iio:lis3l02dq drop separate driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC] iio: accel: st_accel: Add lis3l02dq support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] input: add ADC resistor ladder driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] input: adc-keys: add DT binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 2/2] iio: potentiostat: add LMP91000 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC 1/2] iio: adc: ti-adc1x1s: add support for TI 1-channel differential ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: add missing of_node references to iio_dev
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: sun4i_lradc: new driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/4] iio: potentiometer: Fix typo in Kconfig
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/4] iio: potentiometer: mcp4531: Add device tree binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/4] iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/1] iio:imu:mpu6050: icm20608 initial support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: adc: max1363: Add device tree binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: adc: max1363: Add device tree binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 08/10 v4] iio: pressure: bmp280: add support for BMP085 EOC interrupt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 3/3] ARM:dts-Add dt node for Broadcom iproc-static-adc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: Add driver for Broadcom iproc-static-adc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/3] Documentation: DT: Add iproc-static-adc binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 10/10 v4] iio: pressure: bmp280: read calibration data once
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 09/10 v4] iio: pressure: bmp280: add power management
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 07/10 v4] iio: pressure: bmp280: add SPI interface driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 08/10 v4] iio: pressure: bmp280: add support for BMP085 EOC interrupt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 06/10 v4] iio: pressure: bmp280: split off an I2C Kconfig entry
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 06/10 v4] iio: pressure: bmp280: split off an I2C Kconfig entry
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 05/10 v4] iio: pressure: bmp280: split driver in logical parts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 05/10 v4] iio: pressure: bmp280: split driver in logical parts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 04/10 v4] iio: pressure: bmp280: support supply regulators
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH] iio: imu: add driver for Bosch Sensortec BNO055
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Kernel 4.4 : mma8452 driver bug
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] drivers:iio:light:isl29125: added macros for sensing range
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: Add iio.git tree to MAINTAINERS
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: adc: add missing of_node references to iio_dev
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 2/2] input: add ADC resistor ladder driver
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [RFC 2/2] iio: potentiostat: add LMP91000 support
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [RFC 1/2] iio: adc: ti-adc1x1s: add support for TI 1-channel differential ADCs
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [RFC 0/2] iio: add support for LMP91000EVM potentiostat board
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH 1/2] input: adc-keys: add DT binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] input: add ADC resistor ladder driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] iio: adc: sun4i_lradc: new driver
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] iio: sun4i-lradc: Add binding documentation
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: dac: mcp4725: Remove unneeded conversions to bool
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH] iio: dac: mcp4725: Remove unneeded conversions to bool
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH] iio: dac: mcp4725: Remove unneeded conversions to bool
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v3 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Harald Geyer <harald@xxxxxxxxx>
- Re: [PATCH v3 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Ksenija Stanojević <ksenija.stanojevic@xxxxxxxxx>
- Re: [PATCH v5] iio: temperature: add support for Maxim thermocouple chips
- From: Marek Vasut <marex@xxxxxxx>
- Re: multi-planar buffers
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 0/3] add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v5] iio: temperature: add support for Maxim thermocouple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- [PATCH] iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 2/4] iio: potentiometer: mcp4531: Add device tree binding documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3] iio: temperature: add support for Maxim thermocouple chips
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v9] iio: st_sensors: harden interrupt handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v9] iio: st_sensors: harden interrupt handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/6 v3] iio: magn: ak8975: make sure to power down at remove()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/6 v3] iio: magn: ak8975: allow a delay after enabling regulators
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/6 v3] iio: magn: ak8975: refactor regulator handlers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/6 v3] iio: magn: ak8975: add Vid regulator
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/6 v3] iio: magn: ak8975: fix regulator usage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 04/10 v4] iio: pressure: bmp280: support supply regulators
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 03/10 v4] iio: pressure: bmp280: add reset GPIO line handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 02/10 v4] iio: pressure: bmp280: support device tree initialization
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 01/10 v4] iio: pressure: bmp280: augment DT bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PULL] Second set of new device, new features and cleanups for IIO in the 4.8 cycle
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio:core: timestamping clock selection support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v1 1/1] iio:imu:mpu6050: icm20608 initial support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Florian Vaussard <florian.vaussard@xxxxxxxxxx>
- Re: [PATCH v3 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v3 2/2] iio: adc: max1363: Add device tree binding
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 1/2] iio: adc: max1363: Add device tree binding documentation
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 0/2] iio: adc: max1363: Add device tree support
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 2/4] iio: potentiometer: mcp4531: Add device tree binding documentation
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 4/4] iio: potentiometer: Fix typo in Kconfig
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 1/4] iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- [PATCH v3 0/4] iio: potentiometer: mcp4531: New parts, DT and typo
- From: Florian Vaussard <florian.vaussard@xxxxxxxxx>
- Re: [3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH 10/10 v4] iio: pressure: bmp280: read calibration data once
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 09/10 v4] iio: pressure: bmp280: add power management
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 08/10 v4] iio: pressure: bmp280: add support for BMP085 EOC interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 07/10 v4] iio: pressure: bmp280: add SPI interface driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 06/10 v4] iio: pressure: bmp280: split off an I2C Kconfig entry
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 05/10 v4] iio: pressure: bmp280: split driver in logical parts
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 04/10 v4] iio: pressure: bmp280: support supply regulators
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 03/10 v4] iio: pressure: bmp280: add reset GPIO line handling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 02/10 v4] iio: pressure: bmp280: support device tree initialization
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 01/10 v4] iio: pressure: bmp280: augment DT bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 00/10] Improve the BMP280 driver v4
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PULL] Second set of new device, new features and cleanups for IIO in the 4.8 cycle
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PULL] Third set of fixes for IIO in the 4.7 cycle.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 03/10 v3] iio: pressure: bmp280: add reset GPIO line handling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PULL] Second set of new device, new features and cleanups for IIO in the 4.8 cycle
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 03/10 v3] iio: pressure: bmp280: add reset GPIO line handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PULL] Third set of fixes for IIO in the 4.7 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PULL] Second set of new device, new features and cleanups for IIO in the 4.8 cycle
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/6 v3] iio: magn: ak8975: deploy runtime and system PM
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 5/6 v3] iio: magn: ak8975: make sure to power down at remove()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: bmg160: add callbacks for the filter frequency
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH 07/10 v3] iio: pressure: bmp280: add SPI interface driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v8] iio: st_sensors: harden interrupt handling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v9] iio: st_sensors: harden interrupt handling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 6/6 v3] iio: magn: ak8975: deploy runtime and system PM
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 5/6 v3] iio: magn: ak8975: make sure to power down at remove()
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 4/6 v3] iio: magn: ak8975: allow a delay after enabling regulators
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 3/6 v3] iio: magn: ak8975: refactor regulator handlers
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 2/6 v3] iio: magn: ak8975: add Vid regulator
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/6 v3] iio: magn: ak8975: fix regulator usage
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 0/7] Fix regulators and PM for AK8975 v3
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/3] add support for Allwinner SoCs ADC
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: Question on shared attributes
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] Documentation: DT: Add iproc-static-adc binding
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH] iio: Fix missing unlock on duplicate trigger
- From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 05/10 v3] iio: pressure: bmp280: split driver in logical parts
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: Question on shared attributes
- From: "Cercueil, Paul" <Paul.Cercueil@xxxxxxxxxx>
- Re: [PATCH 9/9 v2] iio: pressure: bmp280: read calibration data once
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- multi-planar buffers
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Question on shared attributes
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
- From: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/3] add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
- From: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] iio: adc: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] hwmon: iio_hwmon: defer probe when no channel is found
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] mfd: add support for Allwinner SoCs ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 1/3] Documentation: DT: Add iproc-static-adc binding
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- [PATCH v4 3/3] ARM:dts-Add dt node for Broadcom iproc-static-adc
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- [PATCH v4 2/3] iio: Add driver for Broadcom iproc-static-adc
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- [PATCH v4 0/3] Add Broadcom iproc-static-adc controller driver
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- Re: [PATCH 9/9 v2] iio: pressure: bmp280: read calibration data once
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- RE: [PATCH v3 2/3] iio: Add driver for Broadcom iproc-static-adc
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- [PATCH v3 1/3] toshiba_acpi: Add IIO interface for accelerometer axis data
- From: Azael Avalos <coproscefalo@xxxxxxxxx>
- Re: [PATCH v2 1/3] toshiba_acpi: Add IIO interface for accelerometer axis data
- From: Azael Avalos <coproscefalo@xxxxxxxxx>
- Re: [PATCH v2 1/3] toshiba_acpi: Add IIO interface for accelerometer axis data
- From: Darren Hart <dvhart@xxxxxxxxxxxxx>
- Re: [PATCH v3] iio: temperature: add support for Maxim thermocouple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: MCP9808 iio or hwmon
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v6 2/2] iio: ad5755: Add DT binding documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/1] iio: buffer-dma: Use ARRAY_SIZE in for loop range
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: MCP9808 iio or hwmon
- From: Alison Schofield <amsfield22@xxxxxxxxx>
- Re: [PATCH v3 2/3] iio: Add driver for Broadcom iproc-static-adc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/6] Documentation: hid: Intel ISH HID document
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH 9/9 v2] iio: pressure: bmp280: read calibration data once
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/9 v2] iio: pressure: bmp280: split driver in logical parts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 9/9 v2] iio: pressure: bmp280: read calibration data once
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH] iio: imu: add driver for Bosch Sensortec BNO055
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 10/10 v3] iio: pressure: bmp280: add power management
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 07/10 v3] iio: pressure: bmp280: add SPI interface driver
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 03/10 v3] iio: pressure: bmp280: add reset GPIO line handling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 09/10 v3] iio: pressure: bmp280: read calibration data once
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 04/10 v3] iio: pressure: bmp280: support supply regulators
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 03/10 v3] iio: pressure: bmp280: add reset GPIO line handling
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 10/10 v3] iio: pressure: bmp280: add power management
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 09/10 v3] iio: pressure: bmp280: read calibration data once
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 06/10 v3] iio: pressure: bmp280: split off an I2C Kconfig entry
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 08/10 v3] iio: pressure: bmp280: add support for BMP085 EOC interrupt
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 07/10 v3] iio: pressure: bmp280: add SPI interface driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 04/10 v3] iio: pressure: bmp280: support supply regulators
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 05/10 v3] iio: pressure: bmp280: split driver in logical parts
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 02/10 v3] iio: pressure: bmp280: support device tree initialization
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 00/10] Improve the BMP280 driver v3
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 03/10 v3] iio: pressure: bmp280: add reset GPIO line handling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 01/10 v3] iio: pressure: bmp280: augment DT bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 1/6] Documentation: hid: Intel ISH HID document
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] drivers:iio:light:isl29125: added macros for sensing range
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [RFC PATCH] iio: imu: add driver for Bosch Sensortec BNO055
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [PATCH 9/9 v2] iio: pressure: bmp280: read calibration data once
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] iio: temperature: add support for Maxim thermocouple chips
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 5/9 v2] iio: pressure: bmp280: split driver in logical parts
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 7/7] iio:st_pressure: clean useless static channel initializers
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 6/7] iio:st_pressure:lps22hb: temperature support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 5/7] iio:st_pressure:lps22hb: open drain support
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 4/7] iio:st_pressure: temperature triggered buffering
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 3/7] iio:st_pressure: document sampling gains
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 2/7] iio:st_pressure: align storagebits on power of 2
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 1/7] iio:st_sensors: align on storagebits boundaries
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- [PATCH v2 0/7] iio:st_pressure: improvements
- From: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
- Re: [RFC PATCH] iio: imu: add driver for Bosch Sensortec BNO055
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [PATCH 1/4] iio: pressure: bmp280: augment DT bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v6 2/2] iio: ad5755: Add DT binding documentation
- From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
- [PATCH v6 1/2] iio: ad5755: add support for dt bindings
- From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
- Re: [PATCH 3/3] iio:ad7266: Fix probe deferral for vref
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 9/9 v2] iio: pressure: bmp280: read calibration data once
- From: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
- Re: [PATCH 1/1] iio: buffer-dma: Use ARRAY_SIZE in for loop range
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH v3] iio: temperature: add support for Maxim thermocouple chips
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v3 1/3] Documentation: DT: Add iproc-static-adc binding
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: Add driver for Broadcom iproc-static-adc
- From: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
- Re: [PATCH v2 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Florian Vaussard <florian.vaussard@xxxxxxxxxx>
- Re: [PATCH v2 2/4] iio: potentiometer: mcp4531: Add device tree binding documentation
- From: Florian Vaussard <florian.vaussard@xxxxxxxxxx>
- [PATCH 1/1] iio: buffer-dma: Use ARRAY_SIZE in for loop range
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] iio: potentiometer: mcp4531: Add device tree binding
- From: Peter Rosin <peda@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Scanners]
[Yosemite Forum]