Re: [PATCH 2/5] iio: Add support for LMP92001 ADC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 18 Aug 2017 14:42:59 +0700
Abhisit Sangjan <s.abhisit@xxxxxxxxx> wrote:

> Hi Jmondi,
> 
> After I removed those cases, I got warnings "no handled in switch".
> 
> On Fri, Aug 18, 2017 at 10:15 AM, Abhisit Sangjan <s.abhisit@xxxxxxxxx>
> wrote:
> 
> > Hi Jmondi,
> >
> > On Fri, Aug 18, 2017 at 9:58 AM, jmondi <jacopo@xxxxxxxxxx> wrote:
> >  
> >> Hi Abhisit,
> >>
> >> On Fri, Aug 18, 2017 at 09:34:16AM +0700, Abhisit Sangjan wrote:  
> >> > Hi Jmondi,
> >> >
> >> > Thank you for your recommend, I am testing the code will be send the new
> >> > patch in soon.  
> >>
> >> [snip]
> >>  
> >> > > > > +
> >> > > > > +        switch (mask)
> >> > > > > +        {
> >> > > > > +        case IIO_CHAN_INFO_RAW:
> >> > > > > +                switch (channel->type) {
> >> > > > > +                case IIO_VOLTAGE:
> >> > > > > +                case IIO_TEMP:
> >> > > > > +                        *val = code;
> >> > > > > +                        return IIO_VAL_INT;
> >> > > > > +                default:
> >> > > > > +                        break;
> >> > > > > +                }
> >> > > > > +                break;
> >> > > > > +        default:
> >> > > > > +                break;  
> >> > >
> >> > > You can remove these default cases or return -EINVAL here.
> >> > >  
> >> >
> >> > Abhisit: Okay, I will remove it.
> >> >              Could you tell me in detail. Sorry, I do not understand the
> >> > Technical.  
> >>
> >> This can potentially be reduced to
> >>
> >>         switch (mask) {
> >>         case IIO_CHAN_INFO_RAW:
> >>                 switch (channel->type) {
> >>                 case IIO_VOLTAGE:
> >>                 case IIO_TEMP:
> >>                         *val = code;
> >>                         return IIO_VAL_INT;
> >>                 }
            default:
	         return -EINVAL;
> >>          }
> >>
get rid of the below.
> >>          return -EINVAL;

Sorry, had forgotten about that warning!

Jonathan

> >>
> >>
> >> But that's definitely not a big deal, there are no optimization in
> >> this code change, just less typing and less default: and break; here
> >> and there
> >>  
> >
> > Abhisit: Thank you so much.
> >  
> 
> Abhisit: If I remove those default cases, I got the warning. How do I would
> do next to fix warning?  Should I leave this code as it?
> 
> # What have I changed.
> diff --git a/drivers/iio/adc/lmp92001-adc.c b/drivers/iio/adc/lmp92001-adc.c
> index 68f7a6c..ebc6423 100644
> --- a/drivers/iio/adc/lmp92001-adc.c
> +++ b/drivers/iio/adc/lmp92001-adc.c
> @@ -92,12 +92,7 @@ static int lmp92001_read_raw(struct iio_dev *indio_dev,
>                 case IIO_TEMP:
>                         *val = code;
>                         return IIO_VAL_INT;
> -               default:
> -                       break;
>                 }
> -               break;
> -       default:
> -               break;
>         }
> 
>         return -EINVAL;
> 
> # Compilation.
>   CC      drivers/iio/adc/lmp92001-adc.o
> drivers/iio/adc/lmp92001-adc.c: In function ‘lmp92001_read_raw’:
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_CURRENT’ not handled in switch [-Wswitch]
>    switch (channel->type) {
>    ^
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_POWER’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_ACCEL’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_ANGL_VEL’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_MAGN’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_LIGHT’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_INTENSITY’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_PROXIMITY’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_INCLI’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_ROT’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_ANGL’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_TIMESTAMP’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_CAPACITANCE’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_ALTVOLTAGE’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_CCT’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_PRESSURE’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_HUMIDITYRELATIVE’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_ACTIVITY’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_STEPS’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_ENERGY’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_DISTANCE’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_VELOCITY’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_CONCENTRATION’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_RESISTANCE’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_PH’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_UVINDEX’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_ELECTRICALCONDUCTIVITY’ not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_COUNT’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value ‘IIO_INDEX’
> not handled in switch [-Wswitch]
> drivers/iio/adc/lmp92001-adc.c:90:3: warning: enumeration value
> ‘IIO_GRAVITY’ not handled in switch [-Wswitch]
> 
> 
> >
> >
> >  

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux