Linux IIO Development

• Thread Index

• [PATCH 0/5] dt-bindings: iio: update maintainers
  • From: <alexandru.tachici@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: accel: add MSA311 accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH V4 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH V4 0/6] iio: accel: bmi088: support BMI085 BMI090L
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 6/6] dt-bindings: iio: accel: Add bmi085 and bmi090l bindings
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 4/6] iio: accel: bmi088: Add support for bmi085 accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 2/6] iio: accel: bmi088: Make it possible to config scales
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 5/6] iio: accel: bmi088: Add support for bmi090l accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 3/6] iio: accel: bmi088: modified the device name
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V8 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH V8 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH] iio: srf08: Remove redundant if statement
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v3 0/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio:accel:bma180: rearrange iio trigger get and register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/5] iio:humidity:hts221: rearrange iio trigger get and register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio:chemical:ccs811: rearrange iio trigger get and register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio:accel:mxc4005: rearrange iio trigger get and register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio:accel:kxcjk-1013: rearrange iio trigger get and register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 0/5] iio: treewide: rearrange iio trig get/register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] iio:accel:kxcjk-1013: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] iio:humidity:hts221: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] iio:accel:bma180: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] iio:accel:mxc4005: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] iio:chemical:ccs811: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH] iio: afe: rescale: Fix logic bug
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH] iio: Prefer octal over symbolic permissions.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v1 0/5] iio: treewide: rearrange iio trig get/register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 5/5] iio:humidity:hts221: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH 4/5] proximity: vl53l0x: Handle the reset GPIO
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v5 0/5] Add support for ToF sensor on Yoshino platform
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v1 0/5] iio: treewide: rearrange iio trig get/register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 3/5] iio:accel:mxc4005: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 0/5] iio: treewide: rearrange iio trig get/register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 1/5] iio:accel:bma180: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 4/5] iio:chemical:ccs811: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 2/5] iio:accel:kxcjk-1013: rearrange iio trigger get and register
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: Re: [PATCH] hv_netvsc: Fix potential dereference of NULL pointer
  • From: 刘永志 <lyz_cs@xxxxxxxxxx>
• Re: [PATCH] hv_netvsc: Fix potential dereference of NULL pointer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH] iio: srf08: Remove redundant if statement
  • From: Li Zhengyu <lizhengyu3@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: fsd: Add ADC device tree node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: exynos-adc: Add support for ADC FSD-HW controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: adc: Add FSD-HW variant
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH V8 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V8 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V8 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V8 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V8 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V8 0/5] iio: accel: sca3300: add compatible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] io:health:afe4404: Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4] iio: vadc: Fix potential dereference of NULL pointer
  • From: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
• RE: [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for texas dac121c081 to the dac5571 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: adxl367: do not update FIFO watermark on scan mode update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:magnetometer:mbc150: Make bmc150_magn_remove() return void
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: adc: stm32: Fix ADC IRQ handling on STM32F4
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 0/6] iio: accel: bmi088: support BMI085 BMI090L
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: exynos-adc: Add support for ADC FSD-HW controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: trigger: sysfs: fix use-after-free on remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: vadc: Fix potential dereference of NULL pointer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: ping: fix typo in comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: bme680: fix typo in comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/8] iio: Improve error reporting for problems during .remove for various i2c drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: exynos-adc: Add support for ADC FSD-HW controller
  • From: Tamseel Shams <m.shams@xxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: fsd: Add ADC device tree node
  • From: Tamseel Shams <m.shams@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: adc: Add FSD-HW variant
  • From: Tamseel Shams <m.shams@xxxxxxxxxxx>
• [PATCH v2 0/3] Adds support of ADC for FSD SoC
  • From: Tamseel Shams <m.shams@xxxxxxxxxxx>
• Re: [PATCH V7 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH V7 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V7 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V7 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V7 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V7 0/5] iio: accel: sca3300: add compatible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: chemical: bme680: fix typo in comment
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• [PATCH] iio: proximity: ping: fix typo in comment
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• Re: kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v3] iio: vadc: Fix potential dereference of NULL pointer
  • From: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
• Re: [PATCH] hv_netvsc: Fix potential dereference of NULL pointer
  • From: 刘永志 <lyz_cs@xxxxxxxxxx>
• [PATCH] hv_netvsc: Fix potential dereference of NULL pointer
  • From: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
• Re: kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• kbuild problem: ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2] iio: vadc: Fix potential dereference of NULL pointer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC 1/2] i2c: core: Add adapter transfer callback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL] 1st set of IIO new device support, features and cleanup for 5.19
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: trigger: sysfs: fix use-after-free on remove
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: trigger: sysfs: fix use-after-free on remove
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2] iio: vadc: Fix potential dereference of NULL pointer
  • From: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
• [RFC 0/2] i2c: core and si7020: Add adapter transfer callback
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [RFC 1/2] i2c: core: Add adapter transfer callback
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [RFC 2/2] iio: humidity: si7020: Use core transfer callback to sleep after reset
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH] iio: vadc: Fix potential dereference of NULL pointer
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH V3 5/6] iio: accel: bmi088: Add support for bmi090l accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 3/6] iio: accel: bmi088: modified the device name
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 4/6] iio: accel: bmi088: Add support for bmi085 accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 0/6] iio: accel: bmi088: support BMI085 BMI090L
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 6/6] dt-bindings: iio: accel: Add bmi085 and bmi090l bindings
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 2/6] iio: accel: bmi088: Make it possible to config scales
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH] iio: vadc: Fix potential dereference of NULL pointer
  • From: Yongzhi Liu <lyz_cs@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi160: Fix the error handling at bmi160_chip_init()
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: stm32: Fix ADCs iteration in irq handler
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  • From: Jialin Zhang <zhangjialin11@xxxxxxxxxx>
• [PATCH] iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  • From: Jialin Zhang <zhangjialin11@xxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: stm32: Fix ADCs iteration in irq handler
  • From: Yannick Brosseau <yannick.brosseau@xxxxxxxxx>
• [PATCH v2 0/2] iio: adc: stm32: Fix ADC IRQ handling on STM32F4
  • From: Yannick Brosseau <yannick.brosseau@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  • From: Yannick Brosseau <yannick.brosseau@xxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: Document ltrf216a light sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v13] arm64: zynqmp: DT: Add Xilinx AMS node
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH] iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH V6 5/5] iio: accel: sca3300: Add inclination channels
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH V6 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH 0/8] iio: Improve error reporting for problems during .remove for various i2c drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Add RZ/G2UL ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: qcom-spmi-adc5: Add missing VCOIN/AMUX_THM3/GPIO# channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: qcom-spmi-adc5: Add missing VCOIN/AMUX_THM3/GPIO# channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/22] iio: replace bitmap_weight with bitmap_weitght_{eq,le} where appropriate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 7/8] iio:light:vcnl4000: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/8] iio:chemical:atlas: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 5/8] iio:light:pa12203001: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/8] iio:adc:ti-ads1015: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 8/8] iio:light:vcnl4035: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/8] iio:adc:ina2xx: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/8] iio:chemical:ccs811: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 6/8] iio:light:us5182d: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 0/8] iio: Improve error reporting for problems during .remove for various i2c drivers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: qcom-spmi-adc5: Add missing VCOIN/AMUX_THM3/GPIO# channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• RE: [PATCH v4 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/2] Add RZ/G2UL ADC support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] iio: accel: adxl367: do not update FIFO watermark on scan mode update
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 05/22] iio: replace bitmap_weight with bitmap_weitght_{eq,le} where appropriate
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH 0/9] iio: Remove duplicated error reporting in .remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: adc: qcom-spmi-adc5: Add missing VCOIN/AMUX_THM3/GPIO# channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/22] iio: replace bitmap_weight with bitmap_weitght_{eq,le} where appropriate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 6/6] dt-bindings: iio: accel: Add bmi085 and bmi090l bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 5/6] iio: accel: bmi088: Add support for bmi090l accel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 4/6] iio: accel: bmi088: Add support for bmi085 accel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 3/6] iio: accel: bmi088: modified the device name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 2/6] iio: accel: bmi088: Make it possible to config scales
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 3/6] iio: accel: bmi088: modified the device name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/8] Utilize iomap interface for PC104 and friends
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH V2 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V1 1/5] iio: accel: bmi088: Modified the scale calculate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 0/2] Add RZ/G2UL ADC support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Use generic_handle_domain_irq()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bmi160: Fix the error handling at bmi160_chip_init()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/8] Utilize iomap interface for PC104 and friends
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/9] iio: Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: fix return error variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio:magnetometer:mbc150: Make bmc150_magn_remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] io:health:afe4404: Remove duplicated error reporting in .remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/9] iio: Remove duplicated error reporting in .remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] io:health:afe4404: Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] Utilize iomap interface for PC104 and friends
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 0/8] Utilize iomap interface for PC104 and friends
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH] iio: imu: bmi160: Fix the error handling at bmi160_chip_init()
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: stm32: Fix check for spurious IRQs on STM32F4
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stm32: Iterate through all ADCs in irq handler
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH V6 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V6 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V6 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V6 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V6 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V6 0/5] iio: accel: sca3300: add compatible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V5 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/9] iio: Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V2 3/6] iio: accel: bmi088: modified the device name
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V5 3/5] iio: accel: sca3300: modified to support multi chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V5 3/5] iio: accel: sca3300: modified to support multi chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 0/5] Add support for ToF sensor on Yoshino platform
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v4 4/5] proximity: vl53l0x: Handle the reset GPIO
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH V5 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V5 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 2/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• RE: [PATCH V2 3/6] iio: accel: bmi088: modified the device name
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5 0/5] iio: accel: sca3300: add compatible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for texas dac121c081 to the dac5571 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 4/5] proximity: vl53l0x: Handle the reset GPIO
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 2/5] proximity: vl53l0x: Prefer pre-initialized interrupt flags
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 0/5] Add support for ToF sensor on Yoshino platform
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v3 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• Re: [PATCH v2 2/5] proximity: vl53l0x: Prefer already initialized interrupt flags
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for texas dac121c081 to the dac5571 driver
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH V2 6/6] dt-bindings: iio: accel: Add bmi085 and bmi090l bindings
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V2 3/6] iio: accel: bmi088: modified the device name
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V2 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 4/7] iio: adc: qcom-spmi-adc5: Add missing VCOIN/AMUX_THM3/GPIO# channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 4/5] proximity: vl53l0x: Handle the reset GPIO
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 2/5] proximity: vl53l0x: Prefer already initialized interrupt flags
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH v2 0/5] Add support for ToF sensor on Yoshino platform
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: humidity: Add si7020 bindings
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: Use generic_handle_domain_irq()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v4 0/3] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] Add RZ/G2UL ADC support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add RZ/G2UL ADC support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 4/5] proximity: vl53l0x: Handle the reset GPIO
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 2/5] proximity: vl53l0x: Get interrupt type from DT
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 1/5] dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• [PATCH 0/5] Add support for ToF sensor on Yoshino platform
  • From: Markuss Broks <markuss.broks@xxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 3/8] gpio: 104-idi-48: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 8/8] iio: dac: cio-dac: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 7/8] iio: adc: stx104: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 5/8] gpio: gpio-mm: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 0/8] Utilize iomap interface for PC104 and friends
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 4/8] gpio: 104-idio-16: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 2/8] gpio: 104-dio-48e: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 1/8] counter: 104-quad-8: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 6/8] gpio: ws16c48: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 05/22] iio: replace bitmap_weight with bitmap_weitght_{eq,le} where appropriate
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• [PATCH V2 4/6] iio: accel: bmi088: Add support for bmi085 accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 5/6] iio: accel: bmi088: Add support for bmi090l accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 6/6] dt-bindings: iio: accel: Add bmi085 and bmi090l bindings
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 2/6] iio: accel: bmi088: Make it possible to config scales
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 3/6] iio: accel: bmi088: modified the device name
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 1/6] iio: accel: bmi088: Modified the scale calculate
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 0/6] iio: accel: bmi088: support BMI085 BMI090L
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [PATCH V1 5/5] iio: accel: bmi088: modifed the device name.
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V1 4/5] iio: accel: bmi088: Make it possible to config scales.
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V1 3/5] iio: accel: bmi088: Add support for bmi090l accel
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V1 2/5] iio: accel: bmi088: Add support for bmi085 accel.
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH V1 1/5] iio: accel: bmi088: Modified the scale calculate
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 07/10] dt-bindings: iio: sx9324: Add input analog gain
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V1 4/5] iio: accel: bmi088: Make it possible to config scales.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V1 4/5] iio: accel: bmi088: Make it possible to config scales.
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH V1 5/5] iio: accel: bmi088: modifed the device name.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V1 4/5] iio: accel: bmi088: Make it possible to config scales.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V1 3/5] iio: accel: bmi088: Add support for bmi090l accel
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V1 2/5] iio: accel: bmi088: Add support for bmi085 accel.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V1 1/5] iio: accel: bmi088: Modified the scale calculate
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V1 0/5] iio: accel: bmi088: support BMI085 BMI090L
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v14 05/10] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH V4 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 29/92] iio: adc: ti-adc084s021: Fix alignment for DMA safety
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH] iio: adc: fix return error variable
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH] iio: adc: fix return error variable
  • From: cgel.zte@xxxxxxxxx
• [PATCH V4 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 0/5] iio: accel: sca3300: add compatible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V4 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/10] iio: Add channel for tap and new modifiers for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v2 60/92] iio: dac: mcp4922: Fix alignment for DMA safety
  • From: Michael Welling <mwelling@xxxxxxxx>
• [PATCH v2 02/92] iio: accel: adxl313: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 76/92] iio: imu: fxos8700: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 34/92] iio: adc: ti-ads124s08: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 70/92] iio: frequency: admv4420: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 15/92] iio: adc: ad7766: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 33/92] iio: adc: ti-adc161s626: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 71/92] iio: frequency: adrf6780: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 45/92] iio: dac: ad5421: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] chrome: Remove Custom ABI |location| attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 56/92] iio: dac: ad7293: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 83/92] iio: potentiometer: mcp41010: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 73/92] iio: gyro: adis16130: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 55/92] iio: dac: ad5791: Fix alignment for DMA saftey
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 48/92] iio: dac: ad5592r: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 32/92] iio: adc: ti-adc128s052: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 60/92] iio: dac: mcp4922: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 06/92] iio: accel: bmi088: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 37/92] iio: adc: ti-ads8344: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 19/92] iio: adc: ad7949: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 04/92] iio: accel: adxl367: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 13/92] iio: adc: ad7476: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 23/92] iio: adc: max1027: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 20/92] iio: adc: hi8435: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 36/92] iio: adc: ti-ads7950: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 38/92] iio: adc: ti-ads8688: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 40/92] iio: addac: ad74413r: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 61/92] iio: dac: ti-dac082s085: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 80/92] iio: potentiometer: ad5110: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 21/92] iio: adc: ltc2496: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 44/92] iio: dac: ad5360: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 67/92] iio: frequency: adf4371: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 92/92] iio: temp: maxim_thermocouple: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 26/92] iio: adc: max1241: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 87/92] iio: proximity: vcnl3020: Drop unnecessary alignment requirement for i2c device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 57/92] iio: dac: ad7303: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 78/92] iio: imu: inv_icm42600: Fix alignment for DMA safety in buffer code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 47/92] iio: dac: ad5504: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 65/92] iio: frequency: ad9523: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 09/92] iio: adc: ad7266: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 91/92] iio: temp: max31865: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 52/92] iio: dac: ad5764: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 66/92] iio: frequency: adf4350: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 72/92] iio: gyro: adis16080: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 22/92] iio: adc: ltc2497: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 90/92] iio: temp: ltc2983: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 75/92] iio: gyro: fxas210002c: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 82/92] iio: potentiometer: max5481: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 64/92] iio: dac: ti-dac7612: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 77/92] iio: imu: inv_icm42600: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 11/92] iio: adc: ad7292: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 69/92] iio: frequency: admv1014: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 84/92] iio: potentiometer: mcp4131: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 01/92] iio: core: Fix IIO_ALIGN and rename as it was not sufficiently large
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 53/92] iio: dac: ad5766: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 62/92] iio: dac: ti-dac5571: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 43/92] iio: dac: ad5064: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 42/92] iio: common: ssp: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 51/92] iio: dac: ad5761: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 03/92] iio: accel: adxl355: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 89/92] iio: resolver: ad2s90: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 81/92] iio: potentiometer: ad5272: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 31/92] iio: adc: ti-adc12138: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 68/92] iio: frequency: admv1013: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 39/92] iio: adc: ti-tlc4541: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 46/92] iio: dac: ad5449: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 41/92] iio: amplifiers: ad8366: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 08/92] iio: accel: sca3300: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 16/92] iio: adc: ad7768-1: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 35/92] iio: adc: ti-ads131e08: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 79/92] iio: imu: mpu6050: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 50/92] iio: dac: ad5755: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 85/92] iio: pressure: dlhl60d: Drop unnecessary alignment forcing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: st_lsm6dsx: Switch from of headers to mod_devicetable.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 49/92] iio: dac: ad5686: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 63/92] iio: dac: ti-dac7311: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 10/92] iio: adc: ad7280a: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 88/92] iio: resolver: ad2s1200: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 59/92] iio: dac: ltc2688: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 86/92] iio: proximity: as3935: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 27/92] iio: adc: mcp320x: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 18/92] iio: adc: ad7923: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 30/92] iio: adc: ti-adc108s102: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 14/92] iio: adc: ad7606: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 74/92] iio: gyro: adxrs450: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 07/92] iio: accel: sca3000: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 28/92] iio: adc: ti-adc0832: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 54/92] iio: dac: ad5770r: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 12/92] iio: adc: ad7298: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 17/92] iio: adc: ad7887: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 25/92] iio: adc: max1118: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 24/92] iio: adc: max11100: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 58/92] iio: dac: ad8801: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 00/92] IIO: Fix alignment of buffers for DMA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 29/92] iio: adc: ti-adc084s021: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 05/92] iio: accel: bma220: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/92] iio: core: Fix IIO_ALIGN as it was not sufficiently large on some platforms.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v1 1/1] iio: imu: st_lsm6dsx: Switch from of headers to mod_devicetable.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: Add support for ltrf216a sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 11/92] iio: adc: ad7292: Fix alignment for DMA safety
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: Add support for ltrf216a sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/10] iio: Add channel for tap and new modifiers for single and double tap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 08/10] iio: accel: bma400: Add support for activity and inactivity events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 05/10] iio: accel: bma400: Add separate channel for step counter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/9] iio: accel: bma400: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 5/5] iio: accel: sca3300: Add inclination channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/9] iio: Remove duplicated error reporting in .remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: yas530: Fix memchr_inv() misuse
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: proximity: srf04: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp288: Override TS pin bias current for some models
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: stm32: Fix check for spurious IRQs on STM32F4
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: adc: stm32: Fix ADC IRQ handling on STM32F4
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• RE: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: adc: stm32: Fix ADC IRQ handling on STM32F4
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: stm32: Iterate through all ADCs in irq handler
  • From: Yannick Brosseau <yannick.brosseau@xxxxxxxxx>
• [PATCH 2/2] iio: adc: stm32: Fix check for spurious IRQs on STM32F4
  • From: Yannick Brosseau <yannick.brosseau@xxxxxxxxx>
• [PATCH 0/2] iio: adc: stm32: Fix ADC IRQ handling on STM32F4
  • From: Yannick Brosseau <yannick.brosseau@xxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Melin Tomas <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Melin Tomas <tomas.melin@xxxxxxxxxxx>
• [PATCH] iio: adc: axp288: Override TS pin bias current for some models
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: rzg2l_adc: Remove unnecessary channel check from rzg2l_adc_read_label()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add RZ/G2UL support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 10/10] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 09/10] iio: Add channel for tap and new modifiers for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 08/10] iio: accel: bma400: Add support for activity and inactivity events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 03/10] iio: accel: bma400: conversion to device-managed function
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 07/10] iio: accel: bma400: Add activity recognition support
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 05/10] iio: accel: bma400: Add separate channel for step counter
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 01/10] iio: accel: bma400: Fix the scale min and max macro values
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 00/10] iio: accel: bma400: Add buffer, step and activity/inactivity
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 04/10] iio: accel: bma400: Add triggered buffer support
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 02/10] iio: accel: bma400: Reordering of header files
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v5 06/10] iio: accel: bma400: Add step change event
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v13] arm64: zynqmp: DT: Add Xilinx AMS node
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/92] IIO: Fix alignment of buffers for DMA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/9] iio:light:stk3310: Remove duplicated error reporting in .remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: trigger: stm32-lptimer-trigger: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO new device support, features and cleanup for 5.19
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH V3 5/5] iio: accel: sca3300: Add inclination channels
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH V3 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 4/5] iio: accel: sca3300: Add support for SCL3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 2/5] iio: accel: sca3300: add define for temp channel for reuse.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 3/5] iio: accel: sca3300: modified to support multi chips
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 1/5] dt-bindings: iio: accel: sca3300: Document murata,scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3 0/5] iio: accel: sca3300: add compitible for scl3300
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 00/92] IIO: Fix alignment of buffers for DMA
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v1 1/1] iio: proximity: srf04: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 29/92] iio: adc: ti-adc084s021: Fix alignment for DMA safety
  • From: Marten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 81/92] iio: potentiometer: ad5272: Fix alignment for DMA safety
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 36/92] iio: adc: ti-ads7950: Fix alignment for DMA safety
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: sx9324: Add setting for CS idle mode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v2 0/2] iio: sx9324: Support CS idle mode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v5 08/10] iio: sx9324: Add Setting for internal analog gain
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v5 07/10] dt-bindings: iio: sx9324: Add input analog gain
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 09/10] dt-bindings: iio: sx9360: Add precharge resistor setting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 07/10] dt-bindings: iio: sx9324: Add input analog gain
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/92] iio: accel: adxl313: Fix alignment for DMA safety
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 01/92] iio: core: Fix IIO_ALIGN as it was not sufficiently large on some platforms.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add 'ltr' as deprecated vendor prefix
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v3 0/3] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH 26/92] iio: adc: max1241: Fix alignment for DMA safety
  • From: Alexandru Lazar <alazar@xxxxxxxxxxxxx>
• Re: [PATCH 01/92] iio: core: Fix IIO_ALIGN as it was not sufficiently large on some platforms.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [v5 12/14] iio: imu: add BNO055 serdev driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [v5 12/14] iio: imu: add BNO055 serdev driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• Re: [PATCH 02/92] iio: accel: adxl313: Fix alignment for DMA safety
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 24/92] iio: adc: max11100: Fix alignment for DMA safety
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: trigger: stm32-lptimer-trigger: Make use of device properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 75/92] iio: gyro: fxas210002c: Fix alignment for DMA safety
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• Re: [PATCH 79/92] iio: imu: mpu6050: Fix alignment for DMA safety
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 78/92] iio: imu: icm42600: Fix alignment for DMA safety in buffer code.
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 77/92] iio: imu_icm42600: Fix alignment for DMA safety
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 64/92] iio: dac: ti-dac7612: Fix alignment for DMA safety
  • From: Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx>
• Re: [PATCH 51/92] iio: dac: ad5761: Fix alignment for DMA safety
  • From: Ricardo Ribalda Delgado <ribalda@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: trigger: stm32-lptimer-trigger: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/92] iio: accel: sca3000: Fix alignment for DMA safety
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• [PATCH 92/92] iio: temp: maxim_thermocouple: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 91/92] iio: temp: max31865: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 90/92] iio: temp: ltc2983: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 89/92] iio: resolver: ad2s90: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 88/92] iio: resolver: ad2s1200: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 87/92] iio: proximity: vcnl3020: Drop unnecessary alignment requirement for i2c device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 86/92] iio: proximity: as3935: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 85/92] iio: pressure: dlhl60d: Drop unnecessary alignment forcing.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 84/92] iio: potentiometer: mcp4131: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 83/92] iio: potentiometer: mcp41010: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 82/92] iio: potentiometer: max5481: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 81/92] iio: potentiometer: ad5272: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 80/92] iio: potentiometer: ad5110: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 79/92] iio: imu: mpu6050: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 78/92] iio: imu: icm42600: Fix alignment for DMA safety in buffer code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 77/92] iio: imu_icm42600: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 76/92] iio: imu: fxos8700: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 75/92] iio: gyro: fxas210002c: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 74/92] iio: gyro: adxrs450: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 73/92] iio: gyro: adis16130: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 72/92] iio: gyro: adis16080: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 71/92] iio: frequency: adrf6780: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 70/92] iio: frequency: admv4420: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 69/92] iio: frequency: admv1014: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 68/92] iio: frequency: admv1013: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 66/92] iio: frequency: adf4350: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 67/92] iio: frequency: adf4371: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 65/92] iio: frequency: ad9523: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 64/92] iio: dac: ti-dac7612: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 63/92] iio: dac: ti-dac7311: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 62/92] iio: dac: ti-dac5571: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 57/92] iio: dac: ad7303: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 60/92] iio: dac: mcp3922: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 56/92] iio: dac: ad7293: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 59/92] iio: dac: ltc2688: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 61/92] iio: dac: ti-dac082s085: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 58/92] iio: dac: ad8801: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 55/92] iio: dac: ad5791: Fix alignment for DMA saftey
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 50/92] iio: dac: ad5755: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 54/92] iio: dac: ad5770r: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 53/92] iio: dac: ad5766: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 51/92] iio: dac: ad5761: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 52/92] iio: dac: ad5764: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 49/92] iio: dac: ad5686: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 48/92] iio: dac: ad5592r: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 45/92] iio: dac: ad5421: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 43/92] iio: dac: ad5064: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 46/92] iio: dac: ad5449: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 44/92] iio: dac: ad5360: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 47/92] iio: dac: ad5504: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 42/92] iio: common: ssp: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 41/92] iio: amplifiers: ad8366: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 40/92] iio: addac: ad74413r: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 36/92] iio: adc: ti-ads7950: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 39/92] iio: adc: ti-tlc4541: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 37/92] iio: adc: ti-ads8344: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 38/92] iio: adc: ti-ads8688: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 35/92] iio: adc: ti-ads131e08: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 34/92] iio: adc: ti-ads124s08: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 33/92] iio: adc: ti-adc161s626: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 32/92] iio: adc: ti-adc128s052: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 31/92] iio: adc: ti-adc12138: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 30/92] iio: adc: ti-adc108s102: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 29/92] iio: adc: ti-adc084s021: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 28/92] iio: adc: ti-adc0832: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 26/92] iio: adc: max1241: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 27/92] iio: adc: mcp320x: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 25/92] iio: adc: max1118: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 24/92] iio: adc: max11100: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 23/92] iio: adc: max1027: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 22/92] iio: adc: ltc2497: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 21/92] iio: adc: ltc2496: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>