Re: [PATCH v8 2/3] iio: adc: Add rtq6056 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 29 Jul 2022 11:38:44 +0800
ChiYuan Huang <u0084500@xxxxxxxxx> wrote:

> Hi, Jonathan:
> 
> cy_huang <u0084500@xxxxxxxxx> 於 2022年7月19日 週二 晚上10:52寫道:
> >
> > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> >
> > Add Richtek rtq6056 supporting.
> >
> > It can be used for the system to monitor load current and power with 16-bit
> > resolution.
> >
> > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > ---
> > Since v8
> > - Instead of 'integraion_time' for voltage channel, use per channel sampling
> >   frequency to be more generic.  
> For the v8 change, is there still anything need to be refined?

Nothing I can see. I was just on vacation so not reading much email ;)

Applied to the togreg branch of iio.git and pushed out as testing for 0-day to
see if it can find anything we missed. Note I'll be rebasing after rc1 is available
and won't push the togreg branch out for linux-next to pick up until after that.

Thanks,

Jonathan

> >
> > Since v7
> > - Use 'DEFINE_RUNTIME_DEV_PM_OPS' to replace the explicit declaration of pm_ops.
> >
> > Since v6
> > - Remove specific rtq6056 ABI document.
> > - Remove the redundant blank line.
> > - To prevent the race condition for attribute wrtie and shunt resistor write,
> >   use 'iio_device_claim_direct_mode' API.
> > - Refine the order for 'action_reset' and 'pm_runtime'.
> > - Fix text typo in comment like as ohm to Ohm and timea to time.
> >
> > Since v5
> > - Fix kernel version text for ABI.
> >
> > Since v4
> > - Add '__aligned(8)' for timestamp member in buffer_trigger_handler function.
> > - Declare timestamp from 'int64_t' to more unified 's64'.
> >
> > Since v3
> > - Refine pm_runtime API calling order in 'read_channel' API.
> > - Fix vshunt wrong scale for divider.
> > - Refine the comment text.
> > - Use 'devm_add_action_or_reset' to decrease the code usage in probe
> >   function.
> > - Use RUNTIME_PM_OPS to replace SET_RUNTIME_PM_OPS.
> > - minor fix for the comma.
> > - Use pm_ptr to replace the direct assigned pm_ops.
> >
> > Since v2
> > - Rename file from 'rtq6056-adc' to 'rtq6056'.
> > - Refine the ABI, if generic already defined it, remove it and check the channel
> >   report unit.
> > - Add copyright text.
> > - include the correct header.
> > - change the property parsing name.
> > - To use iio_chan_spec address field.
> > - Refine each channel separate and shared_by_all.
> > - Use pm_runtime and pm_runtime_autosuspend.
> > - Remove the shutdown callback. From the HW suggestion, it's not recommended to
> >   use battery as the power supply.
> > - Check all scale unit (voltage->mV, current->mA, power->milliWatt).
> > - Use the read_avail to provide the interface for attribute value list.
> > - Add comma for the last element in the const integer array.
> > - Refine each ADC label text.
> > - In read_label callback, replace snprintf to sysfs_emit.
> > ---
> >  drivers/iio/adc/Kconfig   |  15 ++
> >  drivers/iio/adc/Makefile  |   1 +
> >  drivers/iio/adc/rtq6056.c | 661 ++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 677 insertions(+)
> >  create mode 100644 drivers/iio/adc/rtq6056.c
> >
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index 48ace74..caebd1a 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -908,6 +908,21 @@ config ROCKCHIP_SARADC
> >           To compile this driver as a module, choose M here: the
> >           module will be called rockchip_saradc.
> >
> > +config RICHTEK_RTQ6056
> > +       tristate "Richtek RTQ6056 Current and Power Monitor ADC"
> > +       depends on I2C
> > +       select REGMAP_I2C
> > +       select IIO_BUFFER
> > +       select IIO_TRIGGERED_BUFFER
> > +       help
> > +         Say yes here to enable RQT6056 ADC support.
> > +         RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
> > +         compatible interface, and the device provides full information for
> > +         system by reading out the load current and power.
> > +
> > +         This driver can also be built as a module. If so, the module will be
> > +         called rtq6056.
> > +
> >  config RZG2L_ADC
> >         tristate "Renesas RZ/G2L ADC driver"
> >         depends on ARCH_RZG2L || COMPILE_TEST
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > index 39d806f..cda7580 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -84,6 +84,7 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
> >  obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
> >  obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
> >  obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
> > +obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o
> >  obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
> >  obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
> >  obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
> > diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c
> > new file mode 100644
> > index 00000000..c1b2e8d
> > --- /dev/null
> > +++ b/drivers/iio/adc/rtq6056.c
> > @@ -0,0 +1,661 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2022 Richtek Technology Corp.
> > + *
> > + * ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/delay.h>
> > +#include <linux/i2c.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/property.h>
> > +#include <linux/regmap.h>
> > +#include <linux/sysfs.h>
> > +#include <linux/types.h>
> > +#include <linux/util_macros.h>
> > +
> > +#include <linux/iio/buffer.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/sysfs.h>
> > +#include <linux/iio/trigger_consumer.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +
> > +#define RTQ6056_REG_CONFIG     0x00
> > +#define RTQ6056_REG_SHUNTVOLT  0x01
> > +#define RTQ6056_REG_BUSVOLT    0x02
> > +#define RTQ6056_REG_POWER      0x03
> > +#define RTQ6056_REG_CURRENT    0x04
> > +#define RTQ6056_REG_CALIBRATION        0x05
> > +#define RTQ6056_REG_MASKENABLE 0x06
> > +#define RTQ6056_REG_ALERTLIMIT 0x07
> > +#define RTQ6056_REG_MANUFACTID 0xFE
> > +#define RTQ6056_REG_DIEID      0xFF
> > +
> > +#define RTQ6056_VENDOR_ID      0x1214
> > +#define RTQ6056_DEFAULT_CONFIG 0x4127
> > +#define RTQ6056_CONT_ALLON     7
> > +
> > +enum {
> > +       RTQ6056_CH_VSHUNT = 0,
> > +       RTQ6056_CH_VBUS,
> > +       RTQ6056_CH_POWER,
> > +       RTQ6056_CH_CURRENT,
> > +       RTQ6056_MAX_CHANNEL
> > +};
> > +
> > +enum {
> > +       F_OPMODE = 0,
> > +       F_VSHUNTCT,
> > +       F_VBUSCT,
> > +       F_AVG,
> > +       F_RESET,
> > +       F_MAX_FIELDS
> > +};
> > +
> > +struct rtq6056_priv {
> > +       struct device *dev;
> > +       struct regmap *regmap;
> > +       struct regmap_field *rm_fields[F_MAX_FIELDS];
> > +       u32 shunt_resistor_uohm;
> > +       int vshuntct_us;
> > +       int vbusct_us;
> > +       int avg_sample;
> > +};
> > +
> > +static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = {
> > +       [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2),
> > +       [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5),
> > +       [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8),
> > +       [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11),
> > +       [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15),
> > +};
> > +
> > +static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = {
> > +       {
> > +               .type = IIO_VOLTAGE,
> > +               .indexed = 1,
> > +               .channel = 0,
> > +               .address = RTQ6056_REG_SHUNTVOLT,
> > +               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                     BIT(IIO_CHAN_INFO_SCALE) |
> > +                                     BIT(IIO_CHAN_INFO_SAMP_FREQ),
> > +               .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> > +               .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .scan_index = 0,
> > +               .scan_type = {
> > +                       .sign = 's',
> > +                       .realbits = 16,
> > +                       .storagebits = 16,
> > +                       .endianness = IIO_CPU,
> > +               },
> > +       },
> > +       {
> > +               .type = IIO_VOLTAGE,
> > +               .indexed = 1,
> > +               .channel = 1,
> > +               .address = RTQ6056_REG_BUSVOLT,
> > +               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                     BIT(IIO_CHAN_INFO_SCALE) |
> > +                                     BIT(IIO_CHAN_INFO_SAMP_FREQ),
> > +               .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> > +               .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .scan_index = 1,
> > +               .scan_type = {
> > +                       .sign = 'u',
> > +                       .realbits = 16,
> > +                       .storagebits = 16,
> > +                       .endianness = IIO_CPU,
> > +               },
> > +       },
> > +       {
> > +               .type = IIO_POWER,
> > +               .indexed = 1,
> > +               .channel = 2,
> > +               .address = RTQ6056_REG_POWER,
> > +               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                     BIT(IIO_CHAN_INFO_SCALE) |
> > +                                     BIT(IIO_CHAN_INFO_SAMP_FREQ),
> > +               .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .scan_index = 2,
> > +               .scan_type = {
> > +                       .sign = 'u',
> > +                       .realbits = 16,
> > +                       .storagebits = 16,
> > +                       .endianness = IIO_CPU,
> > +               },
> > +       },
> > +       {
> > +               .type = IIO_CURRENT,
> > +               .indexed = 1,
> > +               .channel = 3,
> > +               .address = RTQ6056_REG_CURRENT,
> > +               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                     BIT(IIO_CHAN_INFO_SAMP_FREQ),
> > +               .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> > +               .scan_index = 3,
> > +               .scan_type = {
> > +                       .sign = 's',
> > +                       .realbits = 16,
> > +                       .storagebits = 16,
> > +                       .endianness = IIO_CPU,
> > +               },
> > +       },
> > +       IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL),
> > +};
> > +
> > +static int rtq6056_adc_read_channel(struct rtq6056_priv *priv,
> > +                                   struct iio_chan_spec const *ch,
> > +                                   int *val)
> > +{
> > +       struct device *dev = priv->dev;
> > +       unsigned int addr = ch->address;
> > +       unsigned int regval;
> > +       int ret;
> > +
> > +       pm_runtime_get_sync(dev);
> > +       ret = regmap_read(priv->regmap, addr, &regval);
> > +       pm_runtime_mark_last_busy(dev);
> > +       pm_runtime_put(dev);
> > +       if (ret)
> > +               return ret;
> > +
> > +       /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */
> > +       if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER)
> > +               *val = regval;
> > +       else
> > +               *val = sign_extend32(regval, 16);
> > +
> > +       return IIO_VAL_INT;
> > +}
> > +
> > +static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val,
> > +                                 int *val2)
> > +{
> > +       switch (ch->address) {
> > +       case RTQ6056_REG_SHUNTVOLT:
> > +               /* VSHUNT lsb  2.5uV */
> > +               *val = 2500;
> > +               *val2 = 1000000;
> > +               return IIO_VAL_FRACTIONAL;
> > +       case RTQ6056_REG_BUSVOLT:
> > +               /* VBUS lsb 1.25mV */
> > +               *val = 1250;
> > +               *val2 = 1000;
> > +               return IIO_VAL_FRACTIONAL;
> > +       case RTQ6056_REG_POWER:
> > +               /* Power lsb 25mW */
> > +               *val = 25;
> > +               return IIO_VAL_INT;
> > +       default:
> > +               return -EINVAL;
> > +       }
> > +}
> > +
> > +/*
> > + * Sample frequency for channel VSHUNT and VBUS. The indices correspond
> > + * with the bit value expected by the chip. And it can be found at
> > + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
> > + */
> > +static const int rtq6056_samp_freq_list[] = {
> > +       7194, 4926, 3717, 1904, 964, 485, 243, 122,
> > +};
> > +
> > +static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv,
> > +                                    struct iio_chan_spec const *ch, int val)
> > +{
> > +       struct regmap_field *rm_field;
> > +       unsigned int selector;
> > +       int *ct, ret;
> > +
> > +       if (val > 7194 || val < 122)
> > +               return -EINVAL;
> > +
> > +       if (ch->address == RTQ6056_REG_SHUNTVOLT) {
> > +               rm_field = priv->rm_fields[F_VSHUNTCT];
> > +               ct = &priv->vshuntct_us;
> > +       } else if (ch->address == RTQ6056_REG_BUSVOLT) {
> > +               rm_field = priv->rm_fields[F_VBUSCT];
> > +               ct = &priv->vbusct_us;
> > +       } else
> > +               return -EINVAL;
> > +
> > +       selector = find_closest_descending(val, rtq6056_samp_freq_list,
> > +                                          ARRAY_SIZE(rtq6056_samp_freq_list));
> > +
> > +       ret = regmap_field_write(rm_field, selector);
> > +       if (ret)
> > +               return ret;
> > +
> > +       *ct = 1000000 / rtq6056_samp_freq_list[selector];
> > +
> > +       return 0;
> > +}
> > +
> > +/*
> > + * Available averaging rate for rtq6056. The indices correspond with the bit
> > + * value expected by the chip. And it can be found at
> > + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
> > + */
> > +static const int rtq6056_avg_sample_list[] = {
> > +       1, 4, 16, 64, 128, 256, 512, 1024,
> > +};
> > +
> > +static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val)
> > +{
> > +       unsigned int selector;
> > +       int ret;
> > +
> > +       if (val > 1024 || val < 1)
> > +               return -EINVAL;
> > +
> > +       selector = find_closest(val, rtq6056_avg_sample_list,
> > +                               ARRAY_SIZE(rtq6056_avg_sample_list));
> > +
> > +       ret = regmap_field_write(priv->rm_fields[F_AVG], selector);
> > +       if (ret)
> > +               return ret;
> > +
> > +       priv->avg_sample = rtq6056_avg_sample_list[selector];
> > +
> > +       return 0;
> > +}
> > +
> > +static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv,
> > +                                      struct iio_chan_spec const *ch, int *val)
> > +{
> > +       int sample_time;
> > +
> > +       if (ch->address == RTQ6056_REG_SHUNTVOLT)
> > +               sample_time = priv->vshuntct_us;
> > +       else if (ch->address == RTQ6056_REG_BUSVOLT)
> > +               sample_time = priv->vbusct_us;
> > +       else {
> > +               sample_time = priv->vshuntct_us + priv->vbusct_us;
> > +               sample_time *= priv->avg_sample;
> > +       }
> > +
> > +       *val = 1000000 / sample_time;
> > +
> > +       return IIO_VAL_INT;
> > +}
> > +
> > +static int rtq6056_adc_read_raw(struct iio_dev *indio_dev,
> > +                               struct iio_chan_spec const *chan, int *val,
> > +                               int *val2, long mask)
> > +{
> > +       struct rtq6056_priv *priv = iio_priv(indio_dev);
> > +
> > +       switch (mask) {
> > +       case IIO_CHAN_INFO_RAW:
> > +               return rtq6056_adc_read_channel(priv, chan, val);
> > +       case IIO_CHAN_INFO_SCALE:
> > +               return rtq6056_adc_read_scale(chan, val, val2);
> > +       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> > +               *val = priv->avg_sample;
> > +               return IIO_VAL_INT;
> > +       case IIO_CHAN_INFO_SAMP_FREQ:
> > +               return rtq6056_adc_get_sample_freq(priv, chan, val);
> > +       default:
> > +               return -EINVAL;
> > +       }
> > +}
> > +
> > +static int rtq6056_adc_read_avail(struct iio_dev *indio_dev,
> > +                                 struct iio_chan_spec const *chan,
> > +                                 const int **vals, int *type, int *length,
> > +                                 long mask)
> > +{
> > +       switch (mask) {
> > +       case IIO_CHAN_INFO_SAMP_FREQ:
> > +               *vals = rtq6056_samp_freq_list;
> > +               *type = IIO_VAL_INT;
> > +               *length = ARRAY_SIZE(rtq6056_samp_freq_list);
> > +               return IIO_AVAIL_LIST;
> > +       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> > +               *vals = rtq6056_avg_sample_list;
> > +               *type = IIO_VAL_INT;
> > +               *length = ARRAY_SIZE(rtq6056_avg_sample_list);
> > +               return IIO_AVAIL_LIST;
> > +       default:
> > +               return -EINVAL;
> > +       }
> > +}
> > +
> > +static int rtq6056_adc_write_raw(struct iio_dev *indio_dev,
> > +                                struct iio_chan_spec const *chan, int val,
> > +                                int val2, long mask)
> > +{
> > +       struct rtq6056_priv *priv = iio_priv(indio_dev);
> > +       int ret;
> > +
> > +       ret = iio_device_claim_direct_mode(indio_dev);
> > +       if (ret)
> > +               return ret;
> > +
> > +       switch (mask) {
> > +       case IIO_CHAN_INFO_SAMP_FREQ:
> > +               ret = rtq6056_adc_set_samp_freq(priv, chan, val);
> > +               break;
> > +       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> > +               ret = rtq6056_adc_set_average(priv, val);
> > +               break;
> > +       default:
> > +               ret = -EINVAL;
> > +               break;
> > +       }
> > +
> > +       iio_device_release_direct_mode(indio_dev);
> > +
> > +       return ret;
> > +}
> > +
> > +static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = {
> > +       [RTQ6056_CH_VSHUNT] = "Vshunt",
> > +       [RTQ6056_CH_VBUS] = "Vbus",
> > +       [RTQ6056_CH_POWER] = "Power",
> > +       [RTQ6056_CH_CURRENT] = "Current",
> > +};
> > +
> > +static int rtq6056_adc_read_label(struct iio_dev *indio_dev,
> > +                                 struct iio_chan_spec const *chan,
> > +                                 char *label)
> > +{
> > +       return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]);
> > +}
> > +
> > +static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv,
> > +                                     int resistor_uohm)
> > +{
> > +       unsigned int calib_val;
> > +       int ret;
> > +
> > +       if (resistor_uohm <= 0) {
> > +               dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm);
> > +               return -EINVAL;
> > +       }
> > +
> > +       /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */
> > +       calib_val = 5120000 / resistor_uohm;
> > +       ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val);
> > +       if (ret)
> > +               return ret;
> > +
> > +       priv->shunt_resistor_uohm = resistor_uohm;
> > +
> > +       return 0;
> > +}
> > +
> > +static ssize_t shunt_resistor_show(struct device *dev,
> > +                                  struct device_attribute *attr, char *buf)
> > +{
> > +       struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev));
> > +       int vals[2] = { priv->shunt_resistor_uohm, 1000000 };
> > +
> > +       return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals);
> > +}
> > +
> > +static ssize_t shunt_resistor_store(struct device *dev,
> > +                                   struct device_attribute *attr,
> > +                                   const char *buf, size_t len)
> > +{
> > +       struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > +       struct rtq6056_priv *priv = iio_priv(indio_dev);
> > +       int val, val_fract, ret;
> > +
> > +       ret = iio_device_claim_direct_mode(indio_dev);
> > +       if (ret)
> > +               return ret;
> > +
> > +       ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract);
> > +       if (ret)
> > +               goto out_store;
> > +
> > +       ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract);
> > +
> > +out_store:
> > +       iio_device_release_direct_mode(indio_dev);
> > +
> > +       return ret ?: len;
> > +}
> > +
> > +static IIO_DEVICE_ATTR_RW(shunt_resistor, 0);
> > +
> > +static struct attribute *rtq6056_attributes[] = {
> > +       &iio_dev_attr_shunt_resistor.dev_attr.attr,
> > +       NULL
> > +};
> > +
> > +static const struct attribute_group rtq6056_attribute_group = {
> > +       .attrs = rtq6056_attributes,
> > +};
> > +
> > +static const struct iio_info rtq6056_info = {
> > +       .attrs = &rtq6056_attribute_group,
> > +       .read_raw = rtq6056_adc_read_raw,
> > +       .read_avail = rtq6056_adc_read_avail,
> > +       .write_raw = rtq6056_adc_write_raw,
> > +       .read_label = rtq6056_adc_read_label,
> > +};
> > +
> > +static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p)
> > +{
> > +       struct iio_poll_func *pf = p;
> > +       struct iio_dev *indio_dev = pf->indio_dev;
> > +       struct rtq6056_priv *priv = iio_priv(indio_dev);
> > +       struct device *dev = priv->dev;
> > +       struct {
> > +               u16 vals[RTQ6056_MAX_CHANNEL];
> > +               s64 timestamp __aligned(8);
> > +       } data;
> > +       unsigned int raw;
> > +       int i = 0, bit, ret;
> > +
> > +       memset(&data, 0, sizeof(data));
> > +
> > +       pm_runtime_get_sync(dev);
> > +
> > +       for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
> > +               unsigned int addr = rtq6056_channels[bit].address;
> > +
> > +               ret = regmap_read(priv->regmap, addr, &raw);
> > +               if (ret)
> > +                       goto out;
> > +
> > +               data.vals[i++] = raw;
> > +       }
> > +
> > +       iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev));
> > +
> > +out:
> > +       pm_runtime_mark_last_busy(dev);
> > +       pm_runtime_put(dev);
> > +
> > +       iio_trigger_notify_done(indio_dev->trig);
> > +
> > +       return IRQ_HANDLED;
> > +}
> > +
> > +static void rtq6056_enter_shutdown_state(void *dev)
> > +{
> > +       struct rtq6056_priv *priv = dev_get_drvdata(dev);
> > +
> > +       /* Enter shutdown state */
> > +       regmap_field_write(priv->rm_fields[F_OPMODE], 0);
> > +}
> > +
> > +static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg)
> > +{
> > +       switch (reg) {
> > +       case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT:
> > +       case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID:
> > +               return true;
> > +       default:
> > +               return false;
> > +       }
> > +}
> > +
> > +static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg)
> > +{
> > +       switch (reg) {
> > +       case RTQ6056_REG_CONFIG:
> > +       case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT:
> > +               return true;
> > +       default:
> > +               return false;
> > +       }
> > +}
> > +
> > +static const struct regmap_config rtq6056_regmap_config = {
> > +       .reg_bits = 8,
> > +       .val_bits = 16,
> > +       .val_format_endian = REGMAP_ENDIAN_BIG,
> > +       .max_register = RTQ6056_REG_DIEID,
> > +       .readable_reg = rtq6056_is_readable_reg,
> > +       .writeable_reg = rtq6056_is_writeable_reg,
> > +};
> > +
> > +static int rtq6056_probe(struct i2c_client *i2c)
> > +{
> > +       struct iio_dev *indio_dev;
> > +       struct rtq6056_priv *priv;
> > +       struct device *dev = &i2c->dev;
> > +       struct regmap *regmap;
> > +       unsigned int vendor_id, shunt_resistor_uohm;
> > +       int ret;
> > +
> > +       if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA))
> > +               return -EOPNOTSUPP;
> > +
> > +       indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
> > +       if (!indio_dev)
> > +               return -ENOMEM;
> > +
> > +       priv = iio_priv(indio_dev);
> > +       priv->dev = dev;
> > +       priv->vshuntct_us = priv->vbusct_us = 1037;
> > +       priv->avg_sample = 1;
> > +       i2c_set_clientdata(i2c, priv);
> > +
> > +       regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config);
> > +       if (IS_ERR(regmap))
> > +               return dev_err_probe(dev, PTR_ERR(regmap),
> > +                                    "Failed to init regmap\n");
> > +
> > +       priv->regmap = regmap;
> > +
> > +       ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id);
> > +       if (ret)
> > +               return dev_err_probe(dev, ret,
> > +                                    "Failed to get manufacturer info\n");
> > +
> > +       if (vendor_id != RTQ6056_VENDOR_ID)
> > +               return dev_err_probe(dev, -ENODEV,
> > +                                    "Invalid vendor id 0x%04x\n", vendor_id);
> > +
> > +       ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields,
> > +                                          rtq6056_reg_fields, F_MAX_FIELDS);
> > +       if (ret)
> > +               return dev_err_probe(dev, ret, "Failed to init regmap field\n");
> > +
> > +       /*
> > +        * By default, configure average sample as 1, bus and shunt conversion
> > +        * time as 1037 microsecond, and operating mode to all on.
> > +        */
> > +       ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG);
> > +       if (ret)
> > +               return dev_err_probe(dev, ret,
> > +                                    "Failed to enable continuous sensing\n");
> > +
> > +       ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev);
> > +       if (ret)
> > +               return ret;
> > +
> > +       pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
> > +       pm_runtime_use_autosuspend(dev);
> > +       pm_runtime_set_active(dev);
> > +       pm_runtime_mark_last_busy(dev);
> > +       ret = devm_pm_runtime_enable(dev);
> > +       if (ret)
> > +               return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n");
> > +
> > +       /* By default, use 2000 micro-Ohm resistor */
> > +       shunt_resistor_uohm = 2000;
> > +       device_property_read_u32(dev, "shunt-resistor-micro-ohms",
> > +                                &shunt_resistor_uohm);
> > +
> > +       ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm);
> > +       if (ret)
> > +               return dev_err_probe(dev, ret,
> > +                                    "Failed to init shunt resistor\n");
> > +
> > +       indio_dev->name = "rtq6056";
> > +       indio_dev->modes = INDIO_DIRECT_MODE;
> > +       indio_dev->channels = rtq6056_channels;
> > +       indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels);
> > +       indio_dev->info = &rtq6056_info;
> > +
> > +       ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> > +                                             rtq6056_buffer_trigger_handler,
> > +                                             NULL);
> > +       if (ret)
> > +               return dev_err_probe(dev, ret,
> > +                                    "Failed to allocate iio trigger buffer\n");
> > +
> > +       return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> > +static int rtq6056_runtime_suspend(struct device *dev)
> > +{
> > +       struct rtq6056_priv *priv = dev_get_drvdata(dev);
> > +
> > +       /* Configure to shutdown mode */
> > +       return regmap_field_write(priv->rm_fields[F_OPMODE], 0);
> > +}
> > +
> > +static int rtq6056_runtime_resume(struct device *dev)
> > +{
> > +       struct rtq6056_priv *priv = dev_get_drvdata(dev);
> > +       int sample_rdy_time_us, ret;
> > +
> > +       ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON);
> > +       if (ret)
> > +               return ret;
> > +
> > +       sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us;
> > +       sample_rdy_time_us *= priv->avg_sample;
> > +
> > +       usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100);
> > +
> > +       return 0;
> > +}
> > +
> > +static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend,
> > +                                rtq6056_runtime_resume, NULL);
> > +
> > +static const struct of_device_id rtq6056_device_match[] = {
> > +       { .compatible = "richtek,rtq6056" },
> > +       {}
> > +};
> > +MODULE_DEVICE_TABLE(of, rtq6056_device_match);
> > +
> > +static struct i2c_driver rtq6056_driver = {
> > +       .driver = {
> > +               .name = "rtq6056",
> > +               .of_match_table = rtq6056_device_match,
> > +               .pm = pm_ptr(&rtq6056_pm_ops),
> > +       },
> > +       .probe_new = rtq6056_probe,
> > +};
> > +module_i2c_driver(rtq6056_driver);
> > +
> > +MODULE_AUTHOR("ChiYuan Huang <cy_huang@xxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Richtek RTQ6056 Driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.7.4
> >  





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux