If the ADC vref regulator returns an error, for example, if CONFIG_REGULATOR is not set, the error will be used as a reference voltage. Introduce a guard for negative return values instead of unconditionally casting it to u32. --- drivers/iio/adc/imx8qxp-adc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index 901dd8e1b32f..8a786d73ae8e 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -201,7 +201,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, struct imx8qxp_adc *adc = iio_priv(indio_dev); struct device *dev = adc->dev; - u32 ctrl, vref_uv; + u32 ctrl; long ret; switch (mask) { @@ -244,8 +244,10 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - vref_uv = regulator_get_voltage(adc->vref); - *val = vref_uv / 1000; + ret = regulator_get_voltage(adc->vref); + if (ret < 0) + return ret; + *val = ret / 1000; *val2 = 12; return IIO_VAL_FRACTIONAL_LOG2; -- 2.36.1