On 31.07.2022 23:11, Jonathan Cameron wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Tue, 28 Jun 2022 18:16:31 +0300 > Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> wrote: > >> Add runtime PM support by disabling/enabling ADC's peripheral clock. >> On simple conversion the ADC's clock is kept enabled just while the >> conversion is in progress. This includes also temperature conversion. >> For triggered buffers and touch conversions the ADC clock is kept enabled >> while the triggered buffers or touch are enabled. Along with it removed >> the __maybe_unused on suspend() and resume() ops as the dev_pm_ops >> object members are now filled with SYSTEM_SLEEP_PM_OPS(). >> >> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > > Hi Claudia, > > This patch crossed with a mass conversion series taking lots of drivers > over to the new PM ops macros. That covered some of the changes in here. > I've hand applied this but please check I didn't mess it up. Hi, Jonathan, I've tested it on a SAMA5D2 and it was good. Thank you for taking care of it. Claudiu Beznea > > Thanks, > > Jonathan
