Modify management of drdy line and status register in order to support
LIS2DW12 device
Changes since v1:
- remove drdy_irq parameter from LPS001WP settings since the sensor
does not support data-ready interrupts
Lorenzo Bianconi (5):
iio: st_sensors: decouple irq1 configuration parameters from the irq2
ones
iio: st_sensors: do not always write enable_axis register
iio: st_sensors: add register mask for status register
iio: accel: add support to LIS2DW12
dt-bindings: iio: accel: add LIS2DW12 sensor device binding
.../devicetree/bindings/iio/st-sensors.txt | 1 +
drivers/iio/accel/st_accel.h | 2 +
drivers/iio/accel/st_accel_core.c | 180 +++++++++++++++++----
drivers/iio/accel/st_accel_i2c.c | 5 +
drivers/iio/accel/st_accel_spi.c | 5 +
drivers/iio/common/st_sensors/st_sensors_core.c | 33 ++--
drivers/iio/common/st_sensors/st_sensors_trigger.c | 16 +-
drivers/iio/gyro/st_gyro_core.c | 33 ++--
drivers/iio/magnetometer/st_magn_core.c | 11 +-
drivers/iio/pressure/st_pressure_core.c | 46 ++++--
include/linux/iio/common/st_sensors.h | 23 ++-
11 files changed, 265 insertions(+), 90 deletions(-)
--
2.14.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
