The serial interface can be reset by writing 32 consecutive 1s to the device.
The value of 'ret' is overwritten when ad7793_check_platform_data() is called,
so it should be initialized to -1 only before doing the spi_write().
Fixes: commit 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799")
Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
---
drivers/iio/adc/ad7793.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index e6706a09e100..8680abf72dd2 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -257,7 +257,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
unsigned int vref_mv)
{
struct ad7793_state *st = iio_priv(indio_dev);
- int i, ret = -1;
+ int i, ret;
unsigned long long scale_uv;
u32 id;
@@ -266,6 +266,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
return ret;
/* reset the serial interface */
+ ret = -1;
ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
if (ret < 0)
goto out;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
