On Fri, 21 Jul 2017 00:24:23 +0900
Akinobu Mita <akinobu.mita@xxxxxxxxx> wrote:
> The ti-ads1015 driver has eight iio voltage channels and each iio channel
> can hold own scale information.
>
> The ADS1015 device only have a single config register which contains an
> input multiplexer selection, PGA and data rate settings. So the driver
> should load the correct settings when the input multiplexer selection is
> changed.
>
> However, regardless of which channlel is currently selected, changing any
> iio channel's scale information immediately overwrites the current PGA
> setting in the config register.
>
> It is harmless because the correct PGA settings are reloaded just before
> getting adc result anyway. But it is unnecessary register update and
> should be removed.
>
> Cc: Daniel Baluta <daniel.baluta@xxxxxxxxx>
> Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
> Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/adc/ti-ads1015.c | 18 ++++--------------
> 1 file changed, 4 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
> index 9c501e5..e83cebc 100644
> --- a/drivers/iio/adc/ti-ads1015.c
> +++ b/drivers/iio/adc/ti-ads1015.c
> @@ -312,28 +312,18 @@ static int ads1015_set_scale(struct ads1015_data *data,
> struct iio_chan_spec const *chan,
> int scale, int uscale)
> {
> - int i, ret, rindex = -1;
> + int i;
> int fullscale = div_s64((scale * 1000000LL + uscale) <<
> (chan->scan_type.realbits - 1), 1000000);
>
> for (i = 0; i < ARRAY_SIZE(ads1015_fullscale_range); i++) {
> if (ads1015_fullscale_range[i] == fullscale) {
> - rindex = i;
> - break;
> + data->channel_data[chan->address].pga = i;
> + return 0;
> }
> }
> - if (rindex < 0)
> - return -EINVAL;
> -
> - ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
> - ADS1015_CFG_PGA_MASK,
> - rindex << ADS1015_CFG_PGA_SHIFT);
> - if (ret < 0)
> - return ret;
> -
> - data->channel_data[chan->address].pga = rindex;
>
> - return 0;
> + return -EINVAL;
> }
>
> static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
