On Wed, 30 Aug 2017 13:50:38 +0200
Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx> wrote:
> Modify management of drdy line and status register in order to support
> LIS2DW12 device
>
> Changes since v2:
> - swap status register patch (3rd in v2) with irq{1,2} definition one
> (1st in v2)
> - patchset rebased onto 'fix drdy line configuration for LIS3MDL' patch
> Changes since v1:
> - remove drdy_irq parameter from LPS001WP settings since the sensor
> does not support data-ready interrupts
>
> Lorenzo Bianconi (5):
> iio: st_sensors: add register mask for status register
> iio: st_sensors: decouple irq1 configuration parameters from the irq2
> ones
> iio: st_sensors: do not always write enable_axis register
> iio: accel: add support to LIS2DW12
> dt-bindings: iio: accel: add LIS2DW12 sensor device binding
>
> .../devicetree/bindings/iio/st-sensors.txt | 1 +
> drivers/iio/accel/st_accel.h | 2 +
> drivers/iio/accel/st_accel_core.c | 180 +++++++++++++++++----
> drivers/iio/accel/st_accel_i2c.c | 5 +
> drivers/iio/accel/st_accel_spi.c | 5 +
> drivers/iio/common/st_sensors/st_sensors_core.c | 35 ++--
> drivers/iio/common/st_sensors/st_sensors_trigger.c | 16 +-
> drivers/iio/gyro/st_gyro_core.c | 33 ++--
> drivers/iio/magnetometer/st_magn_core.c | 16 +-
> drivers/iio/pressure/st_pressure_core.c | 46 ++++--
> include/linux/iio/common/st_sensors.h | 23 ++-
> 11 files changed, 270 insertions(+), 92 deletions(-)
>
I'm happy with the whole series, however it doesn't currently apply
due to various fixes working their way through the fixes branches
of the iio git tree. I'll try to pick it up once those have unwound.
There is too much going on with this code at the moment to do this
cleanly now.
Give me a bump if I look like I have forgotten it once it will
apply cleanly to the togreg branch of iio.git.
If I was being really fussy this should have had a dependency list
for everything it was dependant on that wasn't currently in mainline.
Jonathan
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
