> The LTC2741 and LTC2473 are single voltage ADC chips. The LTC2473 > is similar to the LTC2471 but outputs a signed differential value. comments below > Datasheet: > http://cds.linear.com/docs/en/datasheet/24713fb.pdf > > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> > --- > Note: Moved from "hwmon" subsystem to "iio" as discussed per e-mail, > see also: https://patchwork.kernel.org/patch/9816607/ > Only tested the LTC2741 in real life. > > drivers/iio/adc/Kconfig | 10 +++ > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/ltc2471.c | 163 ++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 174 insertions(+) > create mode 100644 drivers/iio/adc/ltc2471.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 401f47b..fbee44a 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -362,6 +362,16 @@ config LPC32XX_ADC > activate only one via device tree selection. Provides direct access > via sysfs. > > +config LTC2471 > + tristate "Linear Technology LTC2471 and LTC2473 ADC driver" > + depends on I2C > + help > + Say yes here to build support for Linear Technology LTC2471 and > + LTC2473 ADC. > + > + This driver can also be built as a module. If so, the module will > + be called ltc2471. > + > config LTC2485 > tristate "Linear Technology LTC2485 ADC driver" > depends on I2C > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 9339bec..afafe85 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -34,6 +34,7 @@ obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o > obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o > obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o > obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o > +obj-$(CONFIG_LTC2471) += ltc2471.o > obj-$(CONFIG_LTC2485) += ltc2485.o > obj-$(CONFIG_LTC2497) += ltc2497.o > obj-$(CONFIG_MAX1027) += max1027.o > diff --git a/drivers/iio/adc/ltc2471.c b/drivers/iio/adc/ltc2471.c > new file mode 100644 > index 0000000..f26bdad > --- /dev/null > +++ b/drivers/iio/adc/ltc2471.c > @@ -0,0 +1,163 @@ > +/* > + * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors > + * The LTC2473 is identical to the 2471, but reports a differential signal. > + * > + * Copyright (C) 2017 Topic Embedded Products > + * Author: Mike Looijmans <mike.looijmans@xxxxxxxx> > + * > + * License: GPLv2 > + */ > + > +#include <linux/err.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > + > +enum chips { ltc2471_ prefix please > + ltc2471, > + ltc2473 end last line with a comma, so additions can be done with a one-line patch > +}; > + > +struct ltc2471_data { > + struct i2c_client *client; > +}; > + > +/* Reference voltage is 1.25V */ > +#define LTC2471_VREF 1250 > + > +/* Read two bytes from the I2C bus to obtain the ADC result */ > +static int ltc2471_get_value(struct i2c_client *client) > +{ > + int ret; > + __be16 buf; > + > + ret = i2c_master_recv(client, (char *)&buf, 2); sizeof(buf) probably > + if (ret < 0) > + return ret; > + if (ret != 2) sizeof(buf) probably > + return -EIO; > + > + /* MSB first */ > + return be16_to_cpu(buf); > +} > + > +static int ltc2471_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long info) > +{ > + struct ltc2471_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (info) { > + case IIO_CHAN_INFO_RAW: > + ret = ltc2471_get_value(data->client); > + if (ret < 0) > + return ret; > + *val = ret; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SCALE: > + if (chan->differential) > + /* Output ranges from -VREF to +VREF */ > + *val = 2 * LTC2471_VREF; > + else > + /* Output ranges from 0 to VREF */ > + *val = LTC2471_VREF; > + *val2 = 16; /* 16 data bits */ > + return IIO_VAL_FRACTIONAL_LOG2; > + > + case IIO_CHAN_INFO_OFFSET: > + if (chan->differential) > + *val = -LTC2471_VREF; > + else > + *val = 0; the non-differential (single ended) chip has no offset channel anyway according to iio_chan_spec... > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static const struct iio_chan_spec ltc2471_channel[] = { > + { > + .type = IIO_VOLTAGE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), > + .differential = 0, .differential = 0 not needed > + }, > +}; > +static const struct iio_chan_spec ltc2473_channel[] = { > + { > + .type = IIO_VOLTAGE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .differential = 1, > + }, > +}; > + > +static const struct iio_info ltc2471_info = { > + .read_raw = ltc2471_read_raw, > + .driver_module = THIS_MODULE, > +}; > + > +static int ltc2471_i2c_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct iio_dev *indio_dev; > + struct ltc2471_data *data; > + int ret; > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) > + return -EOPNOTSUPP; > + > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + i2c_set_clientdata(client, indio_dev); > + data->client = client; > + > + indio_dev->dev.parent = &client->dev; > + indio_dev->name = id->name; > + indio_dev->info = <c2471_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + if (id->driver_data == ltc2473) > + indio_dev->channels = ltc2473_channel; > + else > + indio_dev->channels = ltc2471_channel; > + indio_dev->num_channels = 1; > + > + /* Trigger once to start conversion and check if chip is there */ > + ret = ltc2471_get_value(client); > + if (ret < 0) { > + dev_err(&client->dev, "Cannot read from device.\n"); > + return ret; > + } > + > + return devm_iio_device_register(&client->dev, indio_dev); > +} > + > +static const struct i2c_device_id ltc2471_i2c_id[] = { > + { "ltc2471", ltc2471 }, > + { "ltc2473", ltc2473 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id); > + > +static struct i2c_driver ltc2471_i2c_driver = { > + .driver = { > + .name = "ltc2471", > + }, > + .probe = ltc2471_i2c_probe, > + .id_table = ltc2471_i2c_id, > +}; > + > +module_i2c_driver(ltc2471_i2c_driver); > + > +MODULE_DESCRIPTION("LTC2471/LTC2473 Sensor Driver"); maybe "ADC driver" > +MODULE_AUTHOR("Topic Embedded Products"); > +MODULE_LICENSE("GPL v2"); > -- Peter Meerwald-Stadler Mobile: +43 664 24 44 418 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
