On 06/29/2017 04:11 PM, Mike Looijmans wrote: > On 29-06-17 15:40, Guenter Roeck wrote: >> On 06/29/2017 05:30 AM, Lars-Peter Clausen wrote: >>> On 06/29/2017 02:13 PM, Mike Looijmans wrote: >>>> The LTC2741 and LTC2473 are single voltage monitoring chips. The LTC2473 >>>> is similar to the LTC2471 but outputs a signed differential value. >>>> >>>> Datasheet: >>>> http://cds.linear.com/docs/en/datasheet/24713fb.pdf >>> >>> This looks more like a general purpose ADC rather than a specialized voltage >>> monitoring chip. In my opinion this driver would be better suited for the >>> IIO framework. But before you start working on that lets try to hear what >>> others think about this. >>> >> >> Agreed (I just replied to that on another thread). > > Took a peek at the IIO drivers, looks simple enough, so I suggest to drop > this patch and I'll create an IIO driver instead. > > The ltc2485 (as suggested by Guenter on that other thread) is pretty similar > indeed, it might be feasible to join the two and have one driver handle them > both. That would be preferred over a separat driver, right? > I think the ltc2485 is close enough. It's even listed in the datasheet as a related part. The main difference seems to be the resolution of the ADC and the extra temperature sensor channel. Although one thing to consider is that their control/mode register is quite different. But the current driver doesn't write it. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html