Re: [PATCH v3] iio: adc: Add support for DLN2 ADC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please ignore this patch, a stray modification to lsgpio.c got in.

On 27 June 2017 at 14:53, Jack Andersen <jackoalan@xxxxxxxxx> wrote:
> This patch adds support for Diolan DLN2 ADC via IIO's ADC interface.
> ADC is the fourth and final component of the DLN2 for the kernel.
>
> Signed-off-by: Jack Andersen <jackoalan@xxxxxxxxx>
> ---
> Changes in v2:
> - Address Peter's remarks; bringing consistency to C99 syntax, dev_dbg usage,
>   and error handling.
> - Remove probe/remove logging.
> - Utilize stack-allocated buffer for pushing into IIO.
> - Add timestamp channel to IIO spec.
>
> Suggested-by: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
> ---
> Changes in v3:
> - Remove lazy channel enabling; integrating with update_channel_mode instead.
> - Implement memcpy demux table similar to subsystem core.
> - Use iio_triggered_buffer_setup to create buffer.
>
> Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> ---
>  drivers/iio/adc/Kconfig    |   9 +
>  drivers/iio/adc/Makefile   |   1 +
>  drivers/iio/adc/dln2-adc.c | 733 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/mfd/dln2.c         |  12 +
>  tools/gpio/lsgpio.c        |   4 +-
>  5 files changed, 757 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/iio/adc/dln2-adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 401f47b..78d7455 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -239,6 +239,15 @@ config DA9150_GPADC
>           To compile this driver as a module, choose M here: the module will be
>           called berlin2-adc.
>
> +config DLN2_ADC
> +       tristate "Diolan DLN-2 ADC driver support"
> +       depends on MFD_DLN2
> +       help
> +         Say yes here to build support for Diolan DLN-2 ADC.
> +
> +         This driver can also be built as a module. If so, the module will be
> +         called adc_dln2.
> +
>  config ENVELOPE_DETECTOR
>         tristate "Envelope detector using a DAC and a comparator"
>         depends on OF
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 9339bec..378bc65 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
>  obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
>  obj-$(CONFIG_CPCAP_ADC) += cpcap-adc.o
>  obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
> +obj-$(CONFIG_DLN2_ADC) += dln2-adc.o
>  obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
>  obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
>  obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
> diff --git a/drivers/iio/adc/dln2-adc.c b/drivers/iio/adc/dln2-adc.c
> new file mode 100644
> index 0000000..07569d5
> --- /dev/null
> +++ b/drivers/iio/adc/dln2-adc.c
> @@ -0,0 +1,733 @@
> +/*
> + * Driver for the Diolan DLN-2 USB-ADC adapter
> + *
> + * Copyright (c) 2017 Jack Andersen
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation, version 2.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/dln2.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/kfifo_buf.h>
> +
> +#define DLN2_ADC_MOD_NAME "dln2-adc"
> +
> +#define DLN2_ADC_ID             0x06
> +
> +#define DLN2_ADC_GET_CHANNEL_COUNT     DLN2_CMD(0x01, DLN2_ADC_ID)
> +#define DLN2_ADC_ENABLE                        DLN2_CMD(0x02, DLN2_ADC_ID)
> +#define DLN2_ADC_DISABLE               DLN2_CMD(0x03, DLN2_ADC_ID)
> +#define DLN2_ADC_CHANNEL_ENABLE                DLN2_CMD(0x05, DLN2_ADC_ID)
> +#define DLN2_ADC_CHANNEL_DISABLE       DLN2_CMD(0x06, DLN2_ADC_ID)
> +#define DLN2_ADC_SET_RESOLUTION                DLN2_CMD(0x08, DLN2_ADC_ID)
> +#define DLN2_ADC_CHANNEL_GET_VAL       DLN2_CMD(0x0A, DLN2_ADC_ID)
> +#define DLN2_ADC_CHANNEL_GET_ALL_VAL   DLN2_CMD(0x0B, DLN2_ADC_ID)
> +#define DLN2_ADC_CHANNEL_SET_CFG       DLN2_CMD(0x0C, DLN2_ADC_ID)
> +#define DLN2_ADC_CHANNEL_GET_CFG       DLN2_CMD(0x0D, DLN2_ADC_ID)
> +#define DLN2_ADC_CONDITION_MET_EV      DLN2_CMD(0x10, DLN2_ADC_ID)
> +
> +#define DLN2_ADC_EVENT_NONE            0
> +#define DLN2_ADC_EVENT_BELOW           1
> +#define DLN2_ADC_EVENT_LEVEL_ABOVE     2
> +#define DLN2_ADC_EVENT_OUTSIDE         3
> +#define DLN2_ADC_EVENT_INSIDE          4
> +#define DLN2_ADC_EVENT_ALWAYS          5
> +
> +#define DLN2_ADC_MAX_CHANNELS 8
> +#define DLN2_ADC_DATA_BITS 10
> +
> +/*
> + * Plays similar role to iio_demux_table in subsystem core; except allocated
> + * in a fixed 8-element array.
> + */
> +struct dln2_adc_demux_table {
> +       unsigned int from;
> +       unsigned int to;
> +       unsigned int length;
> +};
> +
> +struct dln2_adc {
> +       struct platform_device *pdev;
> +       struct iio_chan_spec iio_channels[DLN2_ADC_MAX_CHANNELS + 1];
> +       int port, trigger_chan;
> +       struct iio_trigger *trig;
> +       struct mutex mutex;
> +       /* Cached sample period in milliseconds */
> +       unsigned int sample_period;
> +       /* Demux table */
> +       unsigned int demux_count;
> +       struct dln2_adc_demux_table demux[DLN2_ADC_MAX_CHANNELS];
> +       /* Precomputed timestamp padding offset and length */
> +       unsigned int ts_pad_offset, ts_pad_length;
> +};
> +
> +struct dln2_adc_port_chan {
> +       u8 port;
> +       u8 chan;
> +};
> +
> +struct dln2_adc_get_all_vals {
> +       __le16 channel_mask;
> +       __le16 values[DLN2_ADC_MAX_CHANNELS];
> +};
> +
> +static void dln2_adc_add_demux(struct dln2_adc *dln2,
> +       unsigned int in_loc, unsigned int out_loc,
> +       unsigned int length)
> +{
> +       struct dln2_adc_demux_table *p = dln2->demux_count ?
> +               &dln2->demux[dln2->demux_count - 1] : NULL;
> +       if (p && p->from + p->length == in_loc &&
> +               p->to + p->length == out_loc) {
> +               p->length += length;
> +       } else if (dln2->demux_count < DLN2_ADC_MAX_CHANNELS) {
> +               p = &dln2->demux[dln2->demux_count++];
> +               p->from = in_loc;
> +               p->to = out_loc;
> +               p->length = length;
> +       }
> +}
> +
> +static void dln2_adc_update_demux(struct dln2_adc *dln2)
> +{
> +       int in_ind = -1, out_ind;
> +       unsigned int in_loc = 0, out_loc = 0;
> +       struct iio_dev *indio_dev = platform_get_drvdata(dln2->pdev);
> +
> +       /* Clear out any old demux */
> +       dln2->demux_count = 0;
> +
> +       /* Optimize all 8-channels case */
> +       if (indio_dev->masklength &&
> +           (*indio_dev->active_scan_mask & 0xff) == 0xff) {
> +               dln2_adc_add_demux(dln2, 0, 0, 16);
> +               dln2->ts_pad_offset = 0;
> +               dln2->ts_pad_length = 0;
> +               return;
> +       }
> +
> +       /* Build demux table from fixed 8-channels to active_scan_mask */
> +       for_each_set_bit(out_ind,
> +                        indio_dev->active_scan_mask,
> +                        indio_dev->masklength) {
> +               /* Handle timestamp separately */
> +               if (out_ind == DLN2_ADC_MAX_CHANNELS)
> +                       break;
> +               for (++in_ind; in_ind != out_ind; ++in_ind)
> +                       in_loc += 2;
> +               dln2_adc_add_demux(dln2, in_loc, out_loc, 2);
> +               out_loc += 2;
> +               in_loc += 2;
> +       }
> +
> +       if (indio_dev->scan_timestamp) {
> +               size_t ts_offset = indio_dev->scan_bytes / sizeof(int64_t) - 1;
> +
> +               dln2->ts_pad_offset = out_loc;
> +               dln2->ts_pad_length = ts_offset * sizeof(int64_t) - out_loc;
> +       } else {
> +               dln2->ts_pad_offset = 0;
> +               dln2->ts_pad_length = 0;
> +       }
> +}
> +
> +static int dln2_adc_get_chan_count(struct dln2_adc *dln2)
> +{
> +       int ret;
> +       u8 port = dln2->port;
> +       u8 count;
> +       int olen = sizeof(count);
> +
> +       ret = dln2_transfer(dln2->pdev, DLN2_ADC_GET_CHANNEL_COUNT,
> +                           &port, sizeof(port), &count, &olen);
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               return ret;
> +       }
> +       if (olen < sizeof(count))
> +               return -EPROTO;
> +
> +       return count;
> +}
> +
> +static int dln2_adc_set_port_resolution(struct dln2_adc *dln2)
> +{
> +       int ret;
> +       struct dln2_adc_port_chan port_chan = {
> +               .port = dln2->port,
> +               .chan = DLN2_ADC_DATA_BITS,
> +       };
> +
> +       ret = dln2_transfer_tx(dln2->pdev, DLN2_ADC_SET_RESOLUTION,
> +                              &port_chan, sizeof(port_chan));
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +static int dln2_adc_set_chan_enabled(struct dln2_adc *dln2,
> +                                    int channel, bool enable)
> +{
> +       int ret;
> +       struct dln2_adc_port_chan port_chan = {
> +               .port = dln2->port,
> +               .chan = channel,
> +       };
> +
> +       u16 cmd = enable ? DLN2_ADC_CHANNEL_ENABLE : DLN2_ADC_CHANNEL_DISABLE;
> +
> +       ret = dln2_transfer_tx(dln2->pdev, cmd, &port_chan, sizeof(port_chan));
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +static int dln2_adc_set_port_enabled(struct dln2_adc *dln2, bool enable,
> +                                    u16 *conflict_out)
> +{
> +       int ret;
> +       u8 port = dln2->port;
> +       __le16 conflict;
> +       int olen = sizeof(conflict);
> +
> +       u16 cmd = enable ? DLN2_ADC_ENABLE : DLN2_ADC_DISABLE;
> +
> +       if (conflict_out)
> +               *conflict_out = 0;
> +
> +       ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port),
> +                           &conflict, &olen);
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s(%d)\n",
> +                       __func__, (int)enable);
> +               if (conflict_out && enable && olen >= sizeof(conflict))
> +                       *conflict_out = le16_to_cpu(conflict);
> +               return ret;
> +       }
> +       if (enable && olen < sizeof(conflict))
> +               return -EPROTO;
> +
> +       return 0;
> +}
> +
> +static int dln2_adc_set_chan_period(struct dln2_adc *dln2,
> +       unsigned int channel, unsigned int period)
> +{
> +       int ret;
> +       struct {
> +               struct dln2_adc_port_chan port_chan;
> +               __u8 type;
> +               __le16 period;
> +               __le16 low;
> +               __le16 high;
> +       } __packed set_cfg = {
> +               .port_chan.port = dln2->port,
> +               .port_chan.chan = channel,
> +               .type = period ? DLN2_ADC_EVENT_ALWAYS : DLN2_ADC_EVENT_NONE,
> +               .period = cpu_to_le16(period)
> +       };
> +
> +       ret = dln2_transfer_tx(dln2->pdev, DLN2_ADC_CHANNEL_SET_CFG,
> +                              &set_cfg, sizeof(set_cfg));
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               return ret;
> +       }
> +       return 0;
> +}
> +
> +static int dln2_adc_read(struct dln2_adc *dln2, unsigned int channel)
> +{
> +       int ret, i;
> +       struct iio_dev *indio_dev = platform_get_drvdata(dln2->pdev);
> +       u16 conflict;
> +
> +       if (iio_buffer_enabled(indio_dev)) {
> +               ret = -EBUSY;
> +               goto out;
> +       }
> +
> +       ret = dln2_adc_set_chan_enabled(dln2, channel, true);
> +       if (ret < 0)
> +               goto out;
> +
> +       ret = dln2_adc_set_port_enabled(dln2, true, &conflict);
> +       if (ret < 0) {
> +               if (conflict) {
> +                       dev_err(&dln2->pdev->dev,
> +                               "ADC pins conflict with mask %04X\n",
> +                               (int)conflict);
> +                       ret = -EBUSY;
> +               }
> +               goto disable_chan;
> +       }
> +
> +       struct dln2_adc_port_chan port_chan = {
> +               .port = dln2->port,
> +               .chan = channel,
> +       };
> +       __le16 value;
> +       int olen = sizeof(value);
> +
> +       /*
> +        * Call GET_VAL twice due to initial zero-return immediately after
> +        * enabling channel.
> +        */
> +       for (i = 0; i < 2; ++i) {
> +               ret = dln2_transfer(dln2->pdev, DLN2_ADC_CHANNEL_GET_VAL,
> +                                   &port_chan, sizeof(port_chan),
> +                                   &value, &olen);
> +               if (ret < 0) {
> +                       dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +                       goto disable_port;
> +               }
> +               if (olen < sizeof(value)) {
> +                       ret = -EPROTO;
> +                       goto disable_port;
> +               }
> +       }
> +
> +       ret = le16_to_cpu(value);
> +
> +disable_port:
> +       dln2_adc_set_port_enabled(dln2, false, NULL);
> +disable_chan:
> +       dln2_adc_set_chan_enabled(dln2, channel, false);
> +out:
> +       return ret;
> +}
> +
> +static int dln2_adc_read_all(struct dln2_adc *dln2,
> +                            struct dln2_adc_get_all_vals *get_all_vals)
> +{
> +       int ret;
> +       __u8 port = dln2->port;
> +       int olen = sizeof(*get_all_vals);
> +
> +       ret = dln2_transfer(dln2->pdev, DLN2_ADC_CHANNEL_GET_ALL_VAL,
> +                           &port, sizeof(port), get_all_vals, &olen);
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               return ret;
> +       }
> +       if (olen < sizeof(*get_all_vals))
> +               return -EPROTO;
> +
> +       return 0;
> +}
> +
> +static int dln2_adc_read_raw(struct iio_dev *indio_dev,
> +                            struct iio_chan_spec const *chan,
> +                            int *val,
> +                            int *val2,
> +                            long mask)
> +{
> +       int ret;
> +       unsigned int microhertz;
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +
> +       switch (mask) {
> +       case IIO_CHAN_INFO_RAW:
> +               mutex_lock(&dln2->mutex);
> +               ret = dln2_adc_read(dln2, chan->channel);
> +               mutex_unlock(&dln2->mutex);
> +
> +               if (ret < 0)
> +                       return ret;
> +
> +               *val = ret;
> +               return IIO_VAL_INT;
> +
> +       case IIO_CHAN_INFO_SCALE:
> +               /*
> +                * Voltage reference is fixed at 3.3v
> +                *  3.3 / (1 << 10) * 1000000000
> +                */
> +               *val = 0;
> +               *val2 = 3222656;
> +               return IIO_VAL_INT_PLUS_NANO;
> +
> +       case IIO_CHAN_INFO_SAMP_FREQ:
> +               if (dln2->sample_period) {
> +                       microhertz = 1000000000 / dln2->sample_period;
> +                       *val = microhertz / 1000000;
> +                       *val2 = microhertz % 1000000;
> +               } else {
> +                       *val = 0;
> +                       *val2 = 0;
> +               }
> +
> +               return IIO_VAL_INT_PLUS_MICRO;
> +
> +       default:
> +               return -EINVAL;
> +       }
> +}
> +
> +static int dln2_adc_write_raw(struct iio_dev *indio_dev,
> +                             struct iio_chan_spec const *chan,
> +                             int val,
> +                             int val2,
> +                             long mask)
> +{
> +       int ret;
> +       unsigned int microhertz;
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +
> +       switch (mask) {
> +       case IIO_CHAN_INFO_SAMP_FREQ:
> +               microhertz = 1000000 * val + val2;
> +
> +               mutex_lock(&dln2->mutex);
> +
> +               dln2->sample_period =
> +                       microhertz ? 1000000000 / microhertz : UINT_MAX;
> +               if (dln2->sample_period > 65535) {
> +                       dln2->sample_period = 65535;
> +                       dev_warn(&dln2->pdev->dev,
> +                                "clamping period to 65535ms\n");
> +               }
> +
> +               /*
> +                * The first requested channel is arbitrated as a shared
> +                * trigger source, so only one event is registered with the
> +                * DLN. The event handler will then read all enabled channel
> +                * values using DLN2_ADC_CHANNEL_GET_ALL_VAL to maintain
> +                * synchronization between ADC readings.
> +                */
> +               if (dln2->trigger_chan != -1)
> +                       ret = dln2_adc_set_chan_period(dln2,
> +                               dln2->trigger_chan, dln2->sample_period);
> +               else
> +                       ret = 0;
> +
> +               mutex_unlock(&dln2->mutex);
> +
> +               return ret;
> +
> +       default:
> +               return -EINVAL;
> +       }
> +}
> +
> +static int dln2_update_scan_mode(struct iio_dev *indio_dev,
> +                                const unsigned long *scan_mask)
> +{
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +       int chan_count = indio_dev->num_channels - 1;
> +       int ret, i, j;
> +
> +       mutex_lock(&dln2->mutex);
> +
> +       for (i = 0; i < chan_count; ++i) {
> +               ret = dln2_adc_set_chan_enabled(dln2, i,
> +                                               test_bit(i, scan_mask));
> +               if (ret < 0) {
> +                       for (j = 0; j < i; ++j)
> +                               dln2_adc_set_chan_enabled(dln2, j, false);
> +                       mutex_unlock(&dln2->mutex);
> +                       dev_err(&dln2->pdev->dev,
> +                               "Unable to enable ADC channel %d\n", i);
> +                       return -EBUSY;
> +               }
> +       }
> +
> +       dln2_adc_update_demux(dln2);
> +
> +       mutex_unlock(&dln2->mutex);
> +
> +       return 0;
> +}
> +
> +#define DLN2_ADC_CHAN(idx) {                                   \
> +       .type = IIO_VOLTAGE,                                    \
> +       .channel = idx,                                         \
> +       .indexed = 1,                                           \
> +       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
> +       .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) |   \
> +                                  BIT(IIO_CHAN_INFO_SAMP_FREQ),\
> +       .scan_index = idx,                                      \
> +       .scan_type = {                                          \
> +               .sign = 'u',                                    \
> +               .realbits = DLN2_ADC_DATA_BITS,                 \
> +               .storagebits = 16,                              \
> +               .endianness = IIO_LE,                           \
> +       }                                                       \
> +}
> +
> +static const struct iio_info dln2_adc_info = {
> +       .read_raw = dln2_adc_read_raw,
> +       .write_raw = dln2_adc_write_raw,
> +       .update_scan_mode = dln2_update_scan_mode,
> +       .driver_module = THIS_MODULE,
> +};
> +
> +static irqreturn_t dln2_adc_trigger_h(int irq, void *p)
> +{
> +       struct iio_poll_func *pf = p;
> +       struct iio_dev *indio_dev = pf->indio_dev;
> +       struct {
> +               __le16 values[DLN2_ADC_MAX_CHANNELS];
> +               int64_t timestamp_space;
> +       } data;
> +       struct dln2_adc_get_all_vals dev_data;
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +       const struct dln2_adc_demux_table *t;
> +       int ret, i;
> +
> +       mutex_lock(&dln2->mutex);
> +       ret = dln2_adc_read_all(dln2, &dev_data);
> +       mutex_unlock(&dln2->mutex);
> +       if (ret < 0)
> +               goto done;
> +
> +       /* Demux operation */
> +       for (i = 0; i < dln2->demux_count; ++i) {
> +               t = &dln2->demux[i];
> +               memcpy((void *)data.values + t->to,
> +                      (void *)dev_data.values + t->from, t->length);
> +       }
> +
> +       /* Zero padding space between values and timestamp */
> +       if (dln2->ts_pad_length)
> +               memset((void *)data.values + dln2->ts_pad_offset,
> +                      0, dln2->ts_pad_length);
> +
> +       iio_push_to_buffers_with_timestamp(indio_dev, &data,
> +                                          iio_get_time_ns(indio_dev));
> +
> +done:
> +       iio_trigger_notify_done(indio_dev->trig);
> +       return IRQ_HANDLED;
> +}
> +
> +static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
> +{
> +       int ret;
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +       u16 conflict;
> +
> +       mutex_lock(&dln2->mutex);
> +
> +       /* Enable ADC */
> +       ret = dln2_adc_set_port_enabled(dln2, true, &conflict);
> +       if (ret < 0) {
> +               mutex_unlock(&dln2->mutex);
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               if (conflict) {
> +                       dev_err(&dln2->pdev->dev,
> +                               "ADC pins conflict with mask %04X\n",
> +                               (int)conflict);
> +                       ret = -EBUSY;
> +               }
> +               return ret;
> +       }
> +
> +       /* Assign trigger channel based on first enabled channel */
> +       unsigned int trigger_chan =
> +               find_first_bit(indio_dev->active_scan_mask,
> +                              indio_dev->masklength);
> +       if (trigger_chan < DLN2_ADC_MAX_CHANNELS) {
> +               dln2->trigger_chan = trigger_chan;
> +               ret = dln2_adc_set_chan_period(dln2, dln2->trigger_chan,
> +                                              dln2->sample_period);
> +               mutex_unlock(&dln2->mutex);
> +               if (ret < 0) {
> +                       dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +                       return ret;
> +               }
> +       } else {
> +               dln2->trigger_chan = -1;
> +               mutex_unlock(&dln2->mutex);
> +       }
> +
> +       return iio_triggered_buffer_postenable(indio_dev);
> +}
> +
> +static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
> +{
> +       int ret;
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +
> +       mutex_lock(&dln2->mutex);
> +
> +       /* Disable trigger channel */
> +       if (dln2->trigger_chan != -1) {
> +               dln2_adc_set_chan_period(dln2, dln2->trigger_chan, 0);
> +               dln2->trigger_chan = -1;
> +       }
> +
> +       /* Disable ADC */
> +       ret = dln2_adc_set_port_enabled(dln2, false, NULL);
> +
> +       mutex_unlock(&dln2->mutex);
> +       if (ret < 0) {
> +               dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> +               return ret;
> +       }
> +
> +       return iio_triggered_buffer_predisable(indio_dev);
> +}
> +
> +static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = {
> +       .postenable = dln2_adc_triggered_buffer_postenable,
> +       .predisable = dln2_adc_triggered_buffer_predisable,
> +};
> +
> +static void dln2_adc_event(struct platform_device *pdev, u16 echo,
> +                          const void *data, int len)
> +{
> +       struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +
> +       /* Called via URB completion handler */
> +       iio_trigger_poll(dln2->trig);
> +}
> +
> +static const struct iio_trigger_ops dln2_adc_trigger_ops = {
> +       .owner = THIS_MODULE,
> +};
> +
> +static int dln2_adc_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct dln2_adc *dln2;
> +       struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
> +       struct iio_dev *indio_dev;
> +       int i, ret, chans;
> +
> +       indio_dev = devm_iio_device_alloc(dev, sizeof(*dln2));
> +       if (!indio_dev) {
> +               dev_err(dev, "failed allocating iio device\n");
> +               return -ENOMEM;
> +       }
> +
> +       dln2 = iio_priv(indio_dev);
> +       dln2->pdev = pdev;
> +       dln2->port = pdata->port;
> +       dln2->trigger_chan = -1;
> +       mutex_init(&dln2->mutex);
> +       dln2->sample_period = 0;
> +       dln2->demux_count = 0;
> +
> +       platform_set_drvdata(pdev, indio_dev);
> +
> +       ret = dln2_adc_set_port_resolution(dln2);
> +       if (ret < 0) {
> +               dev_err(dev, "failed to set ADC resolution to 10 bits\n");
> +               goto dealloc_dev;
> +       }
> +
> +       chans = dln2_adc_get_chan_count(dln2);
> +       if (chans < 0) {
> +               dev_err(dev, "failed to get channel count: %d\n", chans);
> +               ret = chans;
> +               goto dealloc_dev;
> +       }
> +       if (chans > DLN2_ADC_MAX_CHANNELS) {
> +               chans = DLN2_ADC_MAX_CHANNELS;
> +               dev_warn(dev, "clamping channels to %d\n",
> +                        DLN2_ADC_MAX_CHANNELS);
> +       }
> +
> +       for (i = 0; i < chans; ++i) {
> +               struct iio_chan_spec chan_spec = DLN2_ADC_CHAN(i);
> +               dln2->iio_channels[i] = chan_spec;
> +       }
> +       struct iio_chan_spec timestamp_spec = IIO_CHAN_SOFT_TIMESTAMP(i);
> +       dln2->iio_channels[i] = timestamp_spec;
> +
> +       indio_dev->name = DLN2_ADC_MOD_NAME;
> +       indio_dev->dev.parent = dev;
> +       indio_dev->info = &dln2_adc_info;
> +       indio_dev->modes = INDIO_DIRECT_MODE;
> +       indio_dev->channels = dln2->iio_channels;
> +       indio_dev->num_channels = chans + 1;
> +       indio_dev->setup_ops = &dln2_adc_buffer_setup_ops;
> +
> +       dln2->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
> +                                           indio_dev->name, indio_dev->id);
> +       if (!dln2->trig) {
> +               dev_err(dev, "failed to allocate trigger\n");
> +               ret = -ENOMEM;
> +               goto dealloc_dev;
> +       }
> +       dln2->trig->ops = &dln2_adc_trigger_ops;
> +       iio_trigger_set_drvdata(dln2->trig, dln2);
> +       iio_trigger_register(dln2->trig);
> +       iio_trigger_set_immutable(indio_dev, dln2->trig);
> +
> +       ret = iio_triggered_buffer_setup(indio_dev, NULL, dln2_adc_trigger_h,
> +                                        &dln2_adc_buffer_setup_ops);
> +       if (ret) {
> +               dev_err(dev, "failed to allocate triggered buffer: %d\n", ret);
> +               goto dealloc_trigger;
> +       }
> +
> +       ret = dln2_register_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV,
> +                                    dln2_adc_event);
> +       if (ret) {
> +               dev_err(dev, "failed to register event cb: %d\n", ret);
> +               goto dealloc_pollfunc;
> +       }
> +
> +       ret = iio_device_register(indio_dev);
> +       if (ret) {
> +               dev_err(dev, "failed to register iio device: %d\n", ret);
> +               goto dealloc_pollfunc;
> +       }
> +
> +       return 0;
> +
> +dealloc_pollfunc:
> +       iio_triggered_buffer_cleanup(indio_dev);
> +dealloc_trigger:
> +       iio_trigger_unregister(dln2->trig);
> +dealloc_dev:
> +
> +       return ret;
> +}
> +
> +static int dln2_adc_remove(struct platform_device *pdev)
> +{
> +       struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +       struct dln2_adc *dln2 = iio_priv(indio_dev);
> +
> +       iio_device_unregister(indio_dev);
> +       dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV);
> +       iio_trigger_unregister(dln2->trig);
> +       iio_triggered_buffer_cleanup(indio_dev);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver dln2_adc_driver = {
> +       .driver.name    = DLN2_ADC_MOD_NAME,
> +       .probe          = dln2_adc_probe,
> +       .remove         = dln2_adc_remove,
> +};
> +
> +module_platform_driver(dln2_adc_driver);
> +
> +MODULE_AUTHOR("Jack Andersen <jackoalan@xxxxxxxxx");
> +MODULE_DESCRIPTION("Driver for the Diolan DLN2 ADC interface");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:dln2-adc");
> diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
> index 704e189..a22ab8c 100644
> --- a/drivers/mfd/dln2.c
> +++ b/drivers/mfd/dln2.c
> @@ -53,6 +53,7 @@ enum dln2_handle {
>         DLN2_HANDLE_GPIO,
>         DLN2_HANDLE_I2C,
>         DLN2_HANDLE_SPI,
> +       DLN2_HANDLE_ADC,
>         DLN2_HANDLES
>  };
>
> @@ -663,6 +664,12 @@ static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
>         .port = 0,
>  };
>
> +/* Only one ADC port supported */
> +static struct dln2_platform_data dln2_pdata_adc = {
> +       .handle = DLN2_HANDLE_ADC,
> +       .port = 0,
> +};
> +
>  static const struct mfd_cell dln2_devs[] = {
>         {
>                 .name = "dln2-gpio",
> @@ -679,6 +686,11 @@ static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp)
>                 .platform_data = &dln2_pdata_spi,
>                 .pdata_size = sizeof(struct dln2_platform_data),
>         },
> +       {
> +               .name = "dln2-adc",
> +               .platform_data = &dln2_pdata_adc,
> +               .pdata_size = sizeof(struct dln2_platform_data),
> +       },
>  };
>
>  static void dln2_stop(struct dln2_dev *dln2)
> diff --git a/tools/gpio/lsgpio.c b/tools/gpio/lsgpio.c
> index eb3f56e..58ef924 100644
> --- a/tools/gpio/lsgpio.c
> +++ b/tools/gpio/lsgpio.c
> @@ -77,7 +77,7 @@ int list_device(const char *device_name)
>         int ret;
>         int i;
>
> -       ret = asprintf(&chrdev_name, "/dev/%s", device_name);
> +       ret = asprintf(&chrdev_name, "/sys/class/gpio/%s", device_name);
>         if (ret < 0)
>                 return -ENOMEM;
>
> @@ -169,7 +169,7 @@ int main(int argc, char **argv)
>                 DIR *dp;
>
>                 /* List all GPIO devices one at a time */
> -               dp = opendir("/dev");
> +               dp = opendir("/sys/class/gpio");
>                 if (!dp) {
>                         ret = -errno;
>                         goto error_out;
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux