Enable Block Data Update in hts221_probe() in order to avoid to reconfigure
it every time the sensor is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>
---
drivers/iio/humidity/hts221_core.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/humidity/hts221_core.c b/drivers/iio/humidity/hts221_core.c
index d2f59626b040..47a29b2da1ce 100644
--- a/drivers/iio/humidity/hts221_core.c
+++ b/drivers/iio/humidity/hts221_core.c
@@ -203,12 +203,6 @@ static int hts221_update_odr(struct hts221_hw *hw, u8 odr)
if (i == ARRAY_SIZE(hts221_odr_table))
return -EINVAL;
- /* enable Block Data Update */
- err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
- HTS221_BDU_MASK, 1);
- if (err < 0)
- return err;
-
err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
HTS221_ODR_MASK, hts221_odr_table[i].val);
if (err < 0)
@@ -644,6 +638,12 @@ int hts221_probe(struct iio_dev *iio_dev)
iio_dev->name = HTS221_DEV_NAME;
iio_dev->info = &hts221_info;
+ /* enable Block Data Update */
+ err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
+ HTS221_BDU_MASK, 1);
+ if (err < 0)
+ return err;
+
/* configure humidity sensor */
err = hts221_parse_rh_caldata(hw);
if (err < 0) {
--
2.13.2
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
