Hi Greg, A polite nudge. I'd normally just assume this was buried in your inbox, but as we are rather tight on the possible earliest date for the merge window to open, I just wanted to check this wasn't buried too deep. I've been rather snowed under with travel this cycle, so been running a bit late with everything. Sorry about that! Thanks, Jonathan On Tue, 20 Jun 2017 17:12:17 +0100 Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > The following changes since commit 57d14635f976404fac165047389ff0dbe83bcd5b: > > staging: vchiq_core: Replace remaining BUG_ON with WARN_ON (2017-05-29 17:04:13 +0200) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.13b > > for you to fetch changes up to 881b556f6cf22d37be9340f293f2db10ce7ae8bf: > > iio: imu: inv_mpu6050: test whoami first and against all known values (2017-06-13 21:18:17 +0100) > > ---------------------------------------------------------------- > Second set of IIO new device support, features and cleanups for the 4.13 cycle. > > A few reverts here. One was a general failure to notice a device was already > supported by another driver. The second is due to a review comment pointing > out that the original patch was a bad idea and would break existing systems. > > Reverts > * bma180 > - Revert addition of support for the BMA250E it is already supported by > the bmc150-accel and better supported at that. Oops. > * hi8435 > - The fix for cleanup of the reset gpio stuff isn't a good way to go. It > breaks systems where an inverting level convertor is used. The right fix > is to make the original devicetree correct - even if it involves patching > the devicetree in kernel. > > New Device Support > * stm32-adc > - STM32H7 support and bindings. > > Features > * core > - add a hardware triggered operating mode for systems in which the actual > trigger is never seen by the kernel. This is typically only used when > a device 'can' use other triggers, but if a particular magic one is > enabled the interrupt is effectively handled in hardware and we never see > it. > * st-lsm6dsx > - support active low interrupts. > * stm32-adc > - Make the core adc clock optional as not all hardware supported requires it. > - Make the bus clock optional in the per instance driver as it may be shared > by all instances of the ADC and is handled by the core. > - Rework to have a data structure representing the device type specific > elements. > * stm32-trigger (and counter) > - Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate. > - Add an attribute to configure device modes for quadrature counting etc. > > Clean ups and minor fixes > * IIO core. > - use __sysfs_match_string() helper rather than open coding the same. > * ad7791 > - use sysfs_match_string() helper rather than open coding the same. > * aspeed-adc > - handle return value of clk_prepare_enable > * cpcap > - Fix default register values and ensure the battery thermistor is enabled > correctly. > - Fix the reported die temperature where we can - docs are lacking. > - Remove the hung interrupt quirk as no longer happens due to fix in the > mfd driver. > * hi8435 > - Remove &s from hi8435_info definition as unneeded and inconsistent. > * hid-sensor-trgger > - Add kconfig depends on IIO_BUFFER (fixes patch in previous series) > * ina2xx > - Make the use of iio_info_mask* elements consistent for all channels. > This doesn't have any visible effect, but acts as clear documentation of > which channels various resulting attributes apply to. > * lpc32xx > - handle the return value of clk_prepare_enable. > * meson-saradc > - NULL instead of 0 for pointer. > * mma9551 > - use NULL for GPIO connection ID to aid implementation fo ACPI support. > Here the connection ID doesn't actually tell us anything and it is much > easier to deal with the driver if it's not there. > * mpu6050 > - Fix lock issues through use of a local mux. > - Replace sprintf with scnprintf as appropriate. > - Check whoami against all known values. This allows for a small number of > boards where we are really fishing for the part not being present at all. > It is unfortunately common to have undescribed changes to use newer chips. > We paper over this but just emitting a warning for those cases as long as > we know about. > * mxs-lradc > - Fix some non static warnings. > * rcar-adc > - Part of making the naming for this part consistent across the kernel. > * st_accel > - drop some spi_device_id entries for variants with no SPI support > * st_magn > - drop some spi_device_id entries for variants with no SPI support. > * sx9500 > - Use devm_gpiod_get instead of indexed value with an index of 0 on all > occasions. > * twl4030 > - Drop unused twl4030_get_madc_conversion as callers removed now throughout > kernel. > - Unexport twl4030_madc_conversion() as no used only within this driver. > - Drop twl4030_madc_user_params as not used now. > - Drop twl4030_madc_request.func_cb as not used now. > - Fold the twl4030-madc.h header into the driver as no longer used anywhere > else in the kernel. > * xilinx > - Handle the return value of clk_prepare_enable > > ---------------------------------------------------------------- > Alexander Wuerstlein (1): > iio hid-sensor-trigger: add Kconfig depends on IIO_BUFFER > > Andy Shevchenko (4): > iio: proximity: sx9500: Use devm_gpiod_get() > iio: core: Use __sysfs_match_string() helper > iio: adc: ad7791: Use sysfs_match_string() helper > iio: accel: mma9551: use NULL for GPIO connection ID > > Arvind Yadav (3): > iio: adc: xilinx: Handle return value of clk_prepare_enable > iio:adc:lpc32xx Handle return value of clk_prepare_enable > iio: Aspeed ADC - Handle return value of clk_prepare_enable > > Benjamin Gaignard (2): > iio: add hardware triggered operating mode > iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode > > Fabrice Gasnier (5): > dt-bindings: iio: stm32-adc: add support for STM32H7 > iio: adc: stm32: make core adc clock optional by default > iio: adc: stm32: introduce compatible data cfg > iio: adc: stm32: make per instance bus clock optional > iio: adc: stm32: add support for STM32H7 > > Hans de Goede (2): > Revert "iio: accel: bma180: Add ACPI enumeration support for BMA250E" > Revert "iio: accel: bma180: Add support for BMA250E" > > Jean-Baptiste Maneyrol (3): > iio: imu: inv_mpu6050: fix lock issues by using our own mutex > iio: imu: inv_mpu6050: replace sprintf with scnprintf > iio: imu: inv_mpu6050: test whoami first and against all known values > > Jonathan Cameron (1): > Revert "iio: hi8435: cleanup reset gpio" > > Lorenzo Bianconi (4): > iio: imu: st_lsm6dsx: support active-low interrupts > dt-bindings: iio: imu: st_lsm6dsx: support active-low interrupts > iio: accel: st_accel_spi: fix spi_device_id table > iio: magnetometer: st_magn_spi: fix spi_device_id table > > Nikita Yushchenko (1): > iio: hi8435: remote ampersands from hi8435_info definition > > Paolo Cretaro (2): > iio: adc: mxs-lradc: fix non-static symbol warnings > iio: adc: meson-saradc: use NULL instead of 0 for pointer > > Sebastian Reichel (5): > iio: adc: twl4030: Drop twl4030_get_madc_conversion() > iio: adc: twl4030: Unexport twl4030_madc_conversion() > iio: adc: twl4030: Drop struct twl4030_madc_user_parms > iio: adc: twl4030: Remove twl4030_madc_request.func_cb > iio: adc: twl4030: Fold twl4030-madc.h into driver > > Stefan Brüns (2): > iio: adc: ina2xx: Make use of attribute flags consistent on all channels > iio: adc: Fix integration time/averaging for INA219/220 > > Tony Lindgren (3): > iio: adc: cpcap: Fix default register values and battery temperature > iio: adc: cpcap: Fix die temperature > iio: adc: cpcap: Remove hung interrupt quirk > > Wolfram Sang (1): > iio: use proper name for the R-Car SoC > > .../ABI/testing/sysfs-bus-iio-timer-stm32 | 15 + > .../bindings/iio/adc/renesas,gyroadc.txt | 2 +- > .../devicetree/bindings/iio/adc/st,stm32-adc.txt | 28 +- > .../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 3 +- > drivers/iio/accel/bma180.c | 45 +- > drivers/iio/accel/mma9551.c | 4 +- > drivers/iio/accel/st_accel_spi.c | 4 - > drivers/iio/adc/ad7791.c | 8 +- > drivers/iio/adc/aspeed_adc.c | 6 +- > drivers/iio/adc/cpcap-adc.c | 108 ++- > drivers/iio/adc/hi8435.c | 20 +- > drivers/iio/adc/ina2xx-adc.c | 206 +++++- > drivers/iio/adc/lpc32xx_adc.c | 8 +- > drivers/iio/adc/meson_saradc.c | 2 +- > drivers/iio/adc/mxs-lradc-adc.c | 32 +- > drivers/iio/adc/stm32-adc-core.c | 269 +++++++- > drivers/iio/adc/stm32-adc-core.h | 2 + > drivers/iio/adc/stm32-adc.c | 762 +++++++++++++++++++-- > drivers/iio/adc/twl4030-madc.c | 209 +++--- > drivers/iio/adc/xilinx-xadc-core.c | 5 +- > drivers/iio/common/hid-sensors/Kconfig | 2 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 183 +++-- > drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 8 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 5 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 6 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 11 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 14 + > drivers/iio/industrialio-core.c | 17 +- > drivers/iio/magnetometer/st_magn_spi.c | 2 - > drivers/iio/proximity/sx9500.c | 3 +- > drivers/iio/trigger/stm32-timer-trigger.c | 61 ++ > include/linux/i2c/twl4030-madc.h | 147 ---- > include/linux/iio/iio.h | 6 + > 33 files changed, 1631 insertions(+), 572 deletions(-) > delete mode 100644 include/linux/i2c/twl4030-madc.h > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
