On 2017-05-18 13:07, Andy Shevchenko wrote: > On Wed, May 17, 2017 at 6:28 PM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: >> This is an upstream port of an IIO driver for the TI ADC108S102 and >> ADC128S102. The former can be found on the Intel Galileo Gen2 and the >> Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is >> included. >> >> Due to the lack of regulators under ACPI, we hard-code the voltage >> provided to the VA pin of the ADC to 5 V, the value used on Galileo and >> IOT2000. For DT usage, the regulator "vref-supply" provides this >> information. Note that DT usage has not been tested. >> >> Original author: Bogdan Pricop <bogdan.pricop@xxxxxxxxxx> >> Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel: >> Todor Minchev <todor@xxxxxxxxxxxxx>. >> >> Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> > > It seems you missed my tag. > > FWIW: > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> As the code changed again, I left it out. Thanks for confirming it that it still applies! Jan -- Siemens AG, Corporate Technology, CT RDA ITP SES-DE Corporate Competence Center Embedded Linux -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
