The DPS310 is a temperature and pressure sensor. It can be accessed over
i2c and SPI.
This driver supports polled measurement of temperature over i2c only.
Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
drivers/iio/pressure/Kconfig | 11 ++
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/dps310.c | 401 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 413 insertions(+)
create mode 100644 drivers/iio/pressure/dps310.c
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index bd8d96b96771..50caefc0cd7d 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -42,6 +42,17 @@ config BMP280_SPI
depends on SPI_MASTER
select REGMAP
+config DPS310
+ tristate "Infineon DPS310 pressure and temperature sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Support for the Infineon DPS310 digital barometric pressure sensor.
+ This driver measures temperature only.
+
+ This driver can also be built as a module. If so, the module will be
+ called dps310.
+
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index de3dbc81dc5a..997bbaebfa34 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_BMP280) += bmp280.o
bmp280-objs := bmp280-core.o bmp280-regmap.o
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
+obj-$(CONFIG_DPS310) += dps310.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_HP03) += hp03.o
obj-$(CONFIG_MPL115) += mpl115.o
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
new file mode 100644
index 000000000000..5e8f91a5662b
--- /dev/null
+++ b/drivers/iio/pressure/dps310.c
@@ -0,0 +1,401 @@
+/*
+ * Copyright 2017 IBM Corporation
+ *
+ * Joel Stanley <joel@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * The DPS310 is a barometric pressure and temperature sensor.
+ * Currently only reading a single temperature is supported by
+ * this driver.
+ *
+ * TODO:
+ * - Pressure sensor readings
+ * - Optionally support the FIFO
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define PRS_BASE 0x00
+#define TMP_BASE 0x03
+#define PRS_CFG 0x06
+#define TMP_CFG 0x07
+#define TMP_RATE_BITS GENMASK(6, 4)
+#define TMP_PRC_BITS GENMASK(3, 0)
+#define TMP_EXT BIT(7)
+#define MEAS_CFG 0x08
+#define MEAS_CTRL_BITS GENMASK(2, 0)
+#define PRESSURE_EN BIT(0)
+#define TEMP_EN BIT(1)
+#define BACKGROUND BIT(2)
+#define PRS_RDY BIT(4)
+#define TMP_RDY BIT(5)
+#define SENSOR_RDY BIT(6)
+#define COEF_RDY BIT(7)
+#define CFG_REG 0x09
+#define INT_HL BIT(7)
+#define TMP_SHIFT_EN BIT(3)
+#define PRS_SHIFT_EN BIT(4)
+#define FIFO_EN BIT(5)
+#define SPI_EN BIT(6)
+#define RESET 0x0c
+#define RESET_MAGIC (BIT(0) | BIT(3))
+#define COEF_BASE 0x10
+
+#define TMP_RATE(_n) ilog2(_n)
+#define TMP_PRC(_n) ilog2(_n)
+
+#define MCELSIUS_PER_CELSIUS 1000
+
+const int scale_factor[] = {
+ 524288,
+ 1572864,
+ 3670016,
+ 7864320,
+ 253952,
+ 516096,
+ 1040384,
+ 2088960,
+};
+
+struct dps310_data {
+ struct i2c_client *client;
+ struct regmap *regmap;
+
+ s32 c0, c1;
+ s32 temp_raw;
+};
+
+static const struct iio_chan_spec dps310_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_RAW),
+ },
+};
+
+static s32 dps310_twos_compliment(u32 raw, size_t num_bits)
+{
+ s32 out = raw;
+
+ if (raw & BIT(num_bits - 1))
+ out = raw - BIT(num_bits);
+
+ return out;
+}
+
+static int dps310_get_temp_coef(struct dps310_data *data)
+{
+ struct regmap *regmap = data->regmap;
+ uint8_t coef[3] = {0};
+ int ready, r;
+ u32 c0, c1;
+
+ r = regmap_read(regmap, MEAS_CFG, &ready);
+ if (r < 0)
+ return r;
+
+ if (!(ready & COEF_RDY))
+ return -EAGAIN;
+
+ /*
+ * Read temperature calibration coefficients c0 and c1 from the
+ * COEF register. The numbers are 12-bit 2's compliment numbers
+ */
+ r = regmap_bulk_read(regmap, COEF_BASE, coef, 3);
+ if (r < 0)
+ return r;
+
+ c0 = (coef[0] << 4) | (coef[1] >> 4);
+ data->c0 = dps310_twos_compliment(c0, 12);
+
+ c1 = ((coef[1] & GENMASK(3, 0)) << 8) | coef[2];
+ data->c1 = dps310_twos_compliment(c1, 12);
+
+ return 0;
+}
+
+static int dps310_get_temp_precision(struct dps310_data *data)
+{
+ int val, r;
+
+ r = regmap_read(data->regmap, TMP_CFG, &val);
+ if (r < 0)
+ return r;
+
+ /*
+ * Scale factor is bottom 4 bits of the register, but 1111 is
+ * reserved so just grab bottom three
+ */
+ return BIT(val & GENMASK(2, 0));
+}
+
+static int dps310_set_temp_precision(struct dps310_data *data, int val)
+{
+ int ret;
+ u8 shift_en;
+
+ if (val < 0 || val > 128)
+ return -EINVAL;
+
+ shift_en = val >= 16 ? TMP_SHIFT_EN : 0;
+ ret = regmap_write_bits(data->regmap, CFG_REG, TMP_SHIFT_EN, shift_en);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(data->regmap, TMP_CFG, TMP_PRC_BITS,
+ TMP_PRC(val));
+}
+
+static int dps310_set_temp_samp_freq(struct dps310_data *data, int freq)
+{
+ uint8_t val;
+
+ if (freq < 0 || freq > 128)
+ return -EINVAL;
+
+ val = ilog2(freq) << 4;
+
+ return regmap_update_bits(data->regmap, TMP_CFG, TMP_RATE_BITS, val);
+}
+
+static int dps310_get_temp_samp_freq(struct dps310_data *data)
+{
+ int val, r;
+
+ r = regmap_read(data->regmap, TMP_CFG, &val);
+ if (r < 0)
+ return r;
+
+ return BIT((val & TMP_RATE_BITS) >> 4);
+}
+
+static int dps310_get_temp_k(struct dps310_data *data)
+{
+ int index = ilog2(dps310_get_temp_precision(data));
+
+ return scale_factor[index];
+}
+
+static int dps310_read_temp(struct dps310_data *data)
+{
+ struct device *dev = &data->client->dev;
+ struct regmap *regmap = data->regmap;
+ uint8_t val[3] = {0};
+ int r, ready;
+ int T_raw;
+
+ r = regmap_read(regmap, MEAS_CFG, &ready);
+ if (r < 0)
+ return r;
+ if (!(ready & TMP_RDY)) {
+ dev_dbg(dev, "temperature not ready\n");
+ return -EAGAIN;
+ }
+
+ r = regmap_bulk_read(regmap, TMP_BASE, val, 3);
+ if (r < 0)
+ return r;
+
+ T_raw = (val[0] << 16) | (val[1] << 8) | val[2];
+ data->temp_raw = dps310_twos_compliment(T_raw, 24);
+
+ return 0;
+}
+
+static bool dps310_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case PRS_CFG:
+ case TMP_CFG:
+ case MEAS_CFG:
+ case CFG_REG:
+ case RESET:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool dps310_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case PRS_BASE ... (PRS_BASE + 2):
+ case TMP_BASE ... (TMP_BASE + 2):
+ case MEAS_CFG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int dps310_write_raw(struct iio_dev *iio,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct dps310_data *data = iio_priv(iio);
+
+ if (chan->type != IIO_TEMP)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return dps310_set_temp_samp_freq(data, val);
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return dps310_set_temp_precision(data, val);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int dps310_read_raw(struct iio_dev *iio,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct dps310_data *data = iio_priv(iio);
+ int ret;
+
+ /* c0 * 0.5 + c1 * T_raw / kT °C */
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = dps310_get_temp_samp_freq(data);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_RAW:
+ ret = dps310_read_temp(data);
+ if (ret)
+ return ret;
+
+ *val = data->temp_raw * data->c1;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_OFFSET:
+ *val = (data->c0 >> 1) * dps310_get_temp_k(data);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = MCELSIUS_PER_CELSIUS;
+ *val2 = dps310_get_temp_k(data);
+ return IIO_VAL_FRACTIONAL;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = dps310_get_temp_precision(data);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static const struct regmap_config dps310_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .writeable_reg = dps310_is_writeable_reg,
+ .volatile_reg = dps310_is_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = 0x29,
+};
+
+static const struct iio_info dps310_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = dps310_read_raw,
+ .write_raw = dps310_write_raw,
+};
+
+static int dps310_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct dps310_data *data;
+ struct iio_dev *iio;
+ int r;
+
+ iio = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!iio)
+ return -ENOMEM;
+
+ data = iio_priv(iio);
+ data->client = client;
+
+ iio->dev.parent = &client->dev;
+ iio->name = id->name;
+ iio->channels = dps310_channels;
+ iio->num_channels = ARRAY_SIZE(dps310_channels);
+ iio->info = &dps310_info;
+ iio->modes = INDIO_DIRECT_MODE;
+
+ data->regmap = devm_regmap_init_i2c(client, &dps310_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ r = regmap_write(data->regmap, TMP_CFG, TMP_EXT | TMP_PRC(1));
+ if (r < 0)
+ return r;
+ r = regmap_write_bits(data->regmap, CFG_REG, TMP_SHIFT_EN, 0);
+ if (r < 0)
+ return r;
+
+ /* Turn on temperature measurement in the background */
+ r = regmap_write_bits(data->regmap, MEAS_CFG, MEAS_CTRL_BITS,
+ TEMP_EN | BACKGROUND);
+ if (r < 0)
+ return r;
+
+ /*
+ * Calibration coefficients required for reporting temperature.
+ * They are availalbe 40ms after the device has started
+ */
+ r = dps310_get_temp_coef(data);
+ if (r == -EAGAIN)
+ return -EPROBE_DEFER;
+ if (r < 0)
+ return r;
+
+ r = devm_iio_device_register(&client->dev, iio);
+ if (r)
+ return r;
+
+ i2c_set_clientdata(client, iio);
+
+ dev_info(&client->dev, "%s: sensor '%s'\n", dev_name(&iio->dev),
+ client->name);
+
+ return 0;
+}
+
+static const struct i2c_device_id dps310_id[] = {
+ { "dps310", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, dps310_id);
+
+static const unsigned short normal_i2c[] = {
+ 0x77, 0x76, I2C_CLIENT_END
+};
+
+static struct i2c_driver dps310_driver = {
+ .driver = {
+ .name = "dps310",
+ },
+ .probe = dps310_probe,
+ .address_list = normal_i2c,
+ .id_table = dps310_id,
+};
+module_i2c_driver(dps310_driver);
+
+MODULE_AUTHOR("Joel Stanley <joel@xxxxxxxxx>");
+MODULE_DESCRIPTION("Infineon DPS310 pressure and temperature sensor");
+MODULE_LICENSE("GPL");
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
