On Mon, 22 May 2017 21:26:12 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
Hi Greg,
Just a quick bump, at least partly as I've changed my emails setup and
this may well not have gotten to you! I have a few bits waiting on stuff
from the recent merge windows, so looking forward to bringing my tree up
to date post this set.
Thanks,
Jonathan
> The following changes since commit e44adf05b85e5a9d1d224f5ecde1c1c5e5371e36:
>
> staging/android: Update Ion TODO list (2017-04-18 20:43:14 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.13a
>
> for you to fetch changes up to 7e87d11c9bda75816ced8d0895e8d24e5c52833a:
>
> iio: adc: Add support for TI ADC108S102 and ADC128S102 (2017-05-21 15:11:14 +0100)
>
> ----------------------------------------------------------------
> First set of new device support, features and cleanups for IIO in the 4.13 cycle
>
> Two entirely new drivers in here plus the usual range of cleanups and features.
>
> New device support
> * ad5064
> - add ltc2631, ltc2633 and ltc2635 support.
> * bma180
> - trivial support for bma250e (new id)
> * hid-sensor-rotation
> - add relative orientation and geometric orientation support.
> * isl29028
> - add isl29030 support (its effectively the same part from a driver point of
> view)
> * maxim_thermocouple
> - add max31856 id.
> * meson-saradc
> - add meson8b SoC adc support.
> * ti-adc084s021
> - new driver and bindings.
> * ti-adc108s102
> - new driver and bindings.
>
> Staging graduations
> * isl29028
>
> Features
> * bma180
> - ACPI enumeration for BMA250E which is used in various x86 tablets.
> * hi8453
> - add raw access rather than only events.
> * hid-sensor-hub
> - Implement batch mode in which we can set a threshold on the amount of time
> between data coming from the fifos. This is the first device to do this
> rather than use a watershed on the number of samples.
> * hts221
> - power management support
> * lsm6dsx
> - add system power management support.
> * rpr0521
> - sampling frequency read / write
> * stm32-trigger
> - add support for TRG02 triggers.
> * tsl2583
> - runtime power management support.
>
> Cleanups
> * core
> - inkern: fix a double unlock in iio_read_available_channel_raw when raw
> value doesn't appear to be raw (error path).
> - fixup accidental sizeof pointer in iio_device_add_mask_type.
> * docs
> - fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
> * tools
> - use local include/uapi headers to ensure always up to date.
> - increase length of allowed trigger names.
> * ad9834
> - symbolic to octal permissions.
> * ade7753
> - symbolic to octal permissions.
> - fix indentation
> * ade7754
> - symbolic to octal permissions.
> * ade7758
> - symbolic to octal permissions.
> - ade7854
> - symbolic to octal permissions.
> * as3935
> - move out of storm check to given consistent results for raw and processed
> values.
> * bmp280
> - fix bme280 naming in Kconfig help.
> * hi8435
> - avoid garbage on event after enable.
> - add missing in_voltage_sensing_mode_available to list possible enum options.
> - handle the reset gpio with the obvious polarity rather than relying on
> DT to provide it correctly.
> * hid-sensors
> - fix a wrong error path scrubbing of return values.
> * hid-sensors-accel
> - drop static on a local variable
> * hid-sensors-rotation
> - Add missing scale and offset property parsing support.
> * ina2xx
> - Fix a bad use of GENMASK and some typos and whitespace issues.
> * isl29018
> - only declare the ACPI table when ACPI is enabled.
> * isl29028
> - fix proximity sleep times.
> * lsm6dsx
> - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
> dealing with the various PM config variables.
> * meson-saradc
> - mark meson_sar_adc_data static and const.
> * rcar-gyroadc
> - derive the interface clock speed from the fck clock on the basis they are
> the same actual clock.
> - drop the now unused if clock from the bindings.
> * rpr0521
> - disable sensor when marked as such rather than always enabling it.
> - poweroff if probe fails and we can talk to device.
> - make sure device powered off when it doesn't need to be on.
> - use sizeof rather than hardcoded size on value read.
> - whitespace fixup.
> - reorder channel numbers ready for buffered support which didn't quite
> make this pull request.
> * st-accel
> - fix platform data initialization to allow remove and reprobe.
> * st-pressure
> - fix platform data initialization to allow remove and reprobe.
> * tsl2x7x
> - S_IRUGO, S_IWUSR to octal values
> - rename driver for consistency with more recent drivers
> - drop FSF mailing address
> - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
> relevant function renames.
> * zpa2326
> - report an error for consistency with other error paths.
>
> ----------------------------------------------------------------
> Brian Masney (4):
> staging: iio: isl29028: correct proximity sleep times
> staging: iio: isl29028: move out of staging
> staging: iio: tsl2x7x: rename driver for consistency with other IIO light drivers
> iio: tsl2583: add runtime power management support
>
> Colin Ian King (1):
> iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value
>
> Enric Balletbo i Serra (1):
> tsl2x7x: remove paragraph about writing to the FSF's mailing address
>
> Eugen Hristev (1):
> iio: tools: generic_buffer: increase trigger length
>
> Fabrice Gasnier (1):
> iio: stm32 trigger: Add support for TRGO2 triggers
>
> Hans de Goede (2):
> iio: accel: bma180: Add support for BMA250E
> iio: accel: bma180: Add ACPI enumeration support for BMA250E
>
> Harinath Nampally (1):
> staging: iio: meter: Fix the identations for proper alignments.
>
> Jan Kiszka (1):
> iio: adc: Add support for TI ADC108S102 and ADC128S102
>
> Julia Lawall (1):
> iio: hid-sensor-accel-3d: Drop unnecessary static
>
> Lorenzo Bianconi (4):
> iio: imu: st_lsm6dsx: modify st_lsm6dsx_flush_fifo and st_lsm6dsx_set_fifo_mode scope
> iio: imu: st_lsm6dsx: add system power management support
> iio: humidity: hts221: add power management support
> iio: imu: st_lsm6dsx: substitute ifdef CONFIG_PM with __maybe_unused macro
>
> Marek Vasut (2):
> iio: adc: rcar-gyroadc: Derive interface clock speed from fck clock
> iio: adc: rcar-gyroadc: Drop if clock from Renesas GyroADC bindings
>
> Martin Blumenstingl (3):
> iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
> dt-bindings: iio: adc: add Meson8 and Meson8b support
> iio: adc: meson-saradc: add Meson8b SoC compatibility
>
> Matt Ranostay (2):
> iio: proximity: as3935: move storm out of range check
> iio: temperature: maxim_thermocouple: add MAX31856 part
>
> Matthias Kaehlcke (1):
> iio: light: isl29018: Only declare ACPI table when ACPI is enabled
>
> Mike Looijmans (1):
> iio:ad5064: Add support for ltc2633 and similar devices
>
> Mikko Koivunen (8):
> iio: light: rpr0521 disable sensor -bugfix
> iio: light: rpr0521 poweroff for probe fails
> iio: light: rpr0521 on-off sequence change for CONFIG_PM
> iio: light: rpr0521 magic number to sizeof() on value read
> iio: light: rpr0521 whitespace fixes
> iio: light: rpr0521 sample_frequency read/write
> iio: light: rpr0521 proximity offset read/write
> iio: light: rpr0521 channel numbers reordered
>
> Mårten Lindahl (2):
> dt-bindings: iio: adc: add driver for the ti-adc084s021 chip
> iio: adc: add driver for the ti-adc084s021 chip
>
> Nicholas Mc Guire (1):
> iio: pressure: zpa2326: report interrupted case as failure
>
> Nikita Yushchenko (4):
> iio: hi8435: add raw access
> iio: hi8435: avoid garbage event at first enable
> iio: hi8435: make in_voltage_sensing_mode_available visible
> iio: hi8435: cleanup reset gpio
>
> Orson Zhai (1):
> iio: core: Fix suspicious sizeof usage
>
> Paolo Cretaro (1):
> staging: iio: tsl2x7x: Replace deprecated macros (S_IRUGO, S_IWUSR)
>
> Peter Meerwald-Stadler (1):
> iio: pressure: Fix name of BME280 part in Kconfig
>
> Peter Rosin (1):
> iio: inkern: fix a static checker error
>
> Quentin Swain (5):
> iio: ad9834 convert symbolic permissions to octal
> iio: ade7753 Convert: symbolic permissions to octal
> iio: ade7754: Convert symbolic permissions to octal
> iio: ade7758: Convert symbolic permissions to octal
> iio: ade7854: Convert symbolic permissions to octal
>
> Sebastian Reichel (1):
> iio: isl29028: add isl29030 support
>
> Sekhar Nori (1):
> tools/iio: Use include/uapi with __EXPORTED_HEADERS__
>
> Shrirang Bagul (1):
> iio: st_pressure: st_accel: Initialise sensor platform data properly
>
> Song Hongyan (3):
> iio: hid-sensor-rotation: Add relative orientation sensor hid support
> iio: hid-sensor-rotation: Add geomagnetic orientation sensor hid support.
> iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support
>
> Srinivas Pandruvada (1):
> iio: hid-sensor-hub: Implement batch mode
>
> Stefan Brüns (2):
> iio: Documentation: sysfs-bus-iio-meas-spec: Remove (partially) duplicate line
> iio: adc: Fix bad GENMASK use, typos, whitespace
>
> Surender Polsani (1):
> staging: iio: light: Replace symbolic permissions as per coding style
>
> Documentation/ABI/testing/sysfs-bus-iio | 11 +
> Documentation/ABI/testing/sysfs-bus-iio-meas-spec | 1 -
> .../ABI/testing/sysfs-bus-iio-timer-stm32 | 48 +++
> .../devicetree/bindings/i2c/trivial-devices.txt | 1 +
> .../bindings/iio/adc/amlogic,meson-saradc.txt | 2 +
> .../bindings/iio/adc/renesas,gyroadc.txt | 7 +-
> .../devicetree/bindings/iio/adc/ti-adc084s021.txt | 19 ++
> .../devicetree/bindings/iio/adc/ti-adc108s102.txt | 18 ++
> drivers/iio/accel/bma180.c | 45 ++-
> drivers/iio/accel/hid-sensor-accel-3d.c | 2 +-
> drivers/iio/accel/st_accel_core.c | 7 +-
> drivers/iio/adc/Kconfig | 24 ++
> drivers/iio/adc/Makefile | 2 +
> drivers/iio/adc/hi8435.c | 50 ++-
> drivers/iio/adc/ina2xx-adc.c | 12 +-
> drivers/iio/adc/meson_saradc.c | 86 +++--
> drivers/iio/adc/rcar-gyroadc.c | 16 +-
> drivers/iio/adc/ti-adc084s021.c | 275 ++++++++++++++++
> drivers/iio/adc/ti-adc108s102.c | 348 +++++++++++++++++++++
> .../iio/common/hid-sensors/hid-sensor-attributes.c | 54 +++-
> .../iio/common/hid-sensors/hid-sensor-trigger.c | 80 +++++
> drivers/iio/dac/Kconfig | 3 +-
> drivers/iio/dac/ad5064.c | 71 ++++-
> drivers/iio/humidity/hts221.h | 3 +
> drivers/iio/humidity/hts221_core.c | 54 +++-
> drivers/iio/humidity/hts221_i2c.c | 1 +
> drivers/iio/humidity/hts221_spi.c | 1 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 6 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 52 +++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 1 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 1 +
> drivers/iio/industrialio-core.c | 4 +-
> drivers/iio/inkern.c | 4 +-
> drivers/iio/light/Kconfig | 10 +
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/isl29018.c | 2 +
> drivers/{staging => }/iio/light/isl29028.c | 76 +++--
> drivers/iio/light/rpr0521.c | 307 +++++++++++++++---
> drivers/iio/light/tsl2583.c | 106 +++++--
> drivers/iio/orientation/hid-sensor-rotation.c | 55 +++-
> drivers/iio/pressure/Kconfig | 2 +-
> drivers/iio/pressure/st_pressure_core.c | 8 +-
> drivers/iio/pressure/zpa2326.c | 18 +-
> drivers/iio/proximity/as3935.c | 6 +-
> drivers/iio/temperature/maxim_thermocouple.c | 1 +
> drivers/iio/trigger/stm32-timer-trigger.c | 113 ++++++-
> drivers/staging/iio/frequency/ad9834.c | 22 +-
> drivers/staging/iio/frequency/dds.h | 2 +-
> drivers/staging/iio/light/Kconfig | 10 -
> drivers/staging/iio/light/Makefile | 3 +-
> .../iio/light/{tsl2x7x_core.c => tsl2x7x.c} | 66 ++--
> drivers/staging/iio/meter/ade7753.c | 101 +++---
> drivers/staging/iio/meter/ade7754.c | 56 ++--
> drivers/staging/iio/meter/ade7758_core.c | 50 +--
> drivers/staging/iio/meter/ade7854.c | 88 +++---
> include/linux/hid-sensor-hub.h | 5 +
> include/linux/hid-sensor-ids.h | 5 +
> include/linux/iio/timer/stm32-timer-trigger.h | 2 +
> include/linux/mfd/stm32-timers.h | 2 +
> tools/iio/Makefile | 2 +-
> tools/iio/iio_utils.h | 2 +-
> 62 files changed, 2010 insertions(+), 425 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
> create mode 100644 drivers/iio/adc/ti-adc084s021.c
> create mode 100644 drivers/iio/adc/ti-adc108s102.c
> rename drivers/{staging => }/iio/light/isl29028.c (89%)
> rename drivers/staging/iio/light/{tsl2x7x_core.c => tsl2x7x.c} (95%)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
