On 04/02/2017 02:21 PM, Jonathan Cameron wrote:
> On 02/04/17 12:45, Jonathan Cameron wrote:
>> On 31/03/17 12:45, Fabrice Gasnier wrote:
>>> STM32 DAC supports triggers to synchronize conversions. When trigger
>>> occurs, data is transferred from DHR (data holding register) to DOR
>>> (data output register) so output voltage is updated.
>>> Both hardware and software triggers are supported.
>>>
>>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
>> Hmm. This is a somewhat different use of triggered event from normal...
>>
Waveform generator in STM32 DAC requires a trigger to increment /
decrement internal counter in case of triangle generator. Noise
generator is a bit different, but same trigger usage applies. I agree
this is unusual.
Is it acceptable to use event trigger for this use ?
>> What you have here is rather closer to the output buffers stuff that Analog
>> have in their tree which hasn't made it upstream yet.
>> To that end I'll want Lars to have a look at this... I've completely
>> lost track of where they are with this.
>> Perhaps Lars can give us a quick update?
>>
>> If that was in place (or what I have in my head was true anyway),
>> it would look like the reverse of the triggered buffer input devices.
>> You'd be able to write to a software buffer and it would clock them
>> out as the trigger fires (here I think it would have to keep updating
>> the DHR whenever the trigger occurs).
Hmm.. for waveform generator mode, there is no need for data buffer. DAC
generate samples itself, using trigger. But, i agree it would be nice
for playing data samples (write DHR registers, or dma), yes.
>>
>> Even if it's not there, we aren't necessarily looking at terribly big job
>> to implement it in the core and that would make this handling a lot more
>> 'standard' and consistent.
>
> Having tracked down some limited docs (AN3126 - Audio and waveform
> generation using the DAC in STM32 microcontrollers) the fact this
> can also be driven by DMA definitely argues in favour of working with
> Analog on getting the output buffers support upstream.
>
> *crosses fingers people have the time!*
Hopefully this can happen.
For the time being, I'll propose a similar patch in V2. I found out this
patch is missing a clear path to (re-)assign trigger, once set by
userland. Also, driver never gets informed in case trigger gets changed
or removed, without re-enabling it:
e.g. like echo "" > trigger/current_trigger
I'll propose a small change. Hope you agree with this approach.
Thanks,
Fabrice
>>
>> Jonathan
>>
>>> ---
>>> drivers/iio/dac/Kconfig | 3 +
>>> drivers/iio/dac/stm32-dac-core.h | 12 ++++
>>> drivers/iio/dac/stm32-dac.c | 124 ++++++++++++++++++++++++++++++++++++++-
>>> 3 files changed, 136 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
>>> index 7198648..786c38b 100644
>>> --- a/drivers/iio/dac/Kconfig
>>> +++ b/drivers/iio/dac/Kconfig
>>> @@ -278,6 +278,9 @@ config STM32_DAC
>>> tristate "STMicroelectronics STM32 DAC"
>>> depends on (ARCH_STM32 && OF) || COMPILE_TEST
>>> depends on REGULATOR
>>> + select IIO_TRIGGERED_EVENT
>>> + select IIO_STM32_TIMER_TRIGGER
>>> + select MFD_STM32_TIMERS
>>> select STM32_DAC_CORE
>>> help
>>> Say yes here to build support for STMicroelectronics STM32 Digital
>>> diff --git a/drivers/iio/dac/stm32-dac-core.h b/drivers/iio/dac/stm32-dac-core.h
>>> index d3099f7..3bf211c 100644
>>> --- a/drivers/iio/dac/stm32-dac-core.h
>>> +++ b/drivers/iio/dac/stm32-dac-core.h
>>> @@ -26,6 +26,7 @@
>>>
>>> /* STM32 DAC registers */
>>> #define STM32_DAC_CR 0x00
>>> +#define STM32_DAC_SWTRIGR 0x04
>>> #define STM32_DAC_DHR12R1 0x08
>>> #define STM32_DAC_DHR12R2 0x14
>>> #define STM32_DAC_DOR1 0x2C
>>> @@ -33,8 +34,19 @@
>>>
>>> /* STM32_DAC_CR bit fields */
>>> #define STM32_DAC_CR_EN1 BIT(0)
>>> +#define STM32H7_DAC_CR_TEN1 BIT(1)
>>> +#define STM32H7_DAC_CR_TSEL1_SHIFT 2
>>> +#define STM32H7_DAC_CR_TSEL1 GENMASK(5, 2)
>>> +#define STM32_DAC_CR_WAVE1 GENMASK(7, 6)
>>> +#define STM32_DAC_CR_MAMP1 GENMASK(11, 8)
>>> #define STM32H7_DAC_CR_HFSEL BIT(15)
>>> #define STM32_DAC_CR_EN2 BIT(16)
>>> +#define STM32_DAC_CR_WAVE2 GENMASK(23, 22)
>>> +#define STM32_DAC_CR_MAMP2 GENMASK(27, 24)
>>> +
>>> +/* STM32_DAC_SWTRIGR bit fields */
>>> +#define STM32_DAC_SWTRIGR_SWTRIG1 BIT(0)
>>> +#define STM32_DAC_SWTRIGR_SWTRIG2 BIT(1)
>>>
>>> /**
>>> * struct stm32_dac_common - stm32 DAC driver common data (for all instances)
>>> diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c
>>> index ee9711d..62e43e9 100644
>>> --- a/drivers/iio/dac/stm32-dac.c
>>> +++ b/drivers/iio/dac/stm32-dac.c
>>> @@ -23,6 +23,10 @@
>>> #include <linux/bitfield.h>
>>> #include <linux/delay.h>
>>> #include <linux/iio/iio.h>
>>> +#include <linux/iio/timer/stm32-timer-trigger.h>
>>> +#include <linux/iio/trigger.h>
>>> +#include <linux/iio/trigger_consumer.h>
>>> +#include <linux/iio/triggered_event.h>
>>> #include <linux/kernel.h>
>>> #include <linux/module.h>
>>> #include <linux/platform_device.h>
>>> @@ -31,15 +35,112 @@
>>>
>>> #define STM32_DAC_CHANNEL_1 1
>>> #define STM32_DAC_CHANNEL_2 2
>>> +/* channel2 shift */
>>> +#define STM32_DAC_CHAN2_SHIFT 16
>>>
>>> /**
>>> * struct stm32_dac - private data of DAC driver
>>> * @common: reference to DAC common data
>>> + * @swtrig: Using software trigger
>>> */
>>> struct stm32_dac {
>>> struct stm32_dac_common *common;
>>> + bool swtrig;
>>> };
>>>
>>> +/**
>>> + * struct stm32_dac_trig_info - DAC trigger info
>>> + * @name: name of the trigger, corresponding to its source
>>> + * @tsel: trigger selection, value to be configured in DAC_CR.TSELx
>>> + */
>>> +struct stm32_dac_trig_info {
>>> + const char *name;
>>> + u32 tsel;
>>> +};
>>> +
>>> +static const struct stm32_dac_trig_info stm32h7_dac_trinfo[] = {
>>> + { "swtrig", 0 },
>>> + { TIM1_TRGO, 1 },
>>> + { TIM2_TRGO, 2 },
>>> + { TIM4_TRGO, 3 },
>>> + { TIM5_TRGO, 4 },
>>> + { TIM6_TRGO, 5 },
>>> + { TIM7_TRGO, 6 },
>>> + { TIM8_TRGO, 7 },
>>> + {},
>>> +};
>>> +
>>> +static irqreturn_t stm32_dac_trigger_handler(int irq, void *p)
>>> +{
>>> + struct iio_poll_func *pf = p;
>>> + struct iio_dev *indio_dev = pf->indio_dev;
>>> + struct stm32_dac *dac = iio_priv(indio_dev);
>>> + int channel = indio_dev->channels[0].channel;
>>> +
>>> + /* Using software trigger? Then, trigger it now */
>>> + if (dac->swtrig) {
>>> + u32 swtrig;
>>> +
>>> + if (channel == STM32_DAC_CHANNEL_1)
>>> + swtrig = STM32_DAC_SWTRIGR_SWTRIG1;
>>> + else
>>> + swtrig = STM32_DAC_SWTRIGR_SWTRIG2;
>>> + regmap_update_bits(dac->common->regmap, STM32_DAC_SWTRIGR,
>>> + swtrig, swtrig);
>>> + }
>>> +
>>> + iio_trigger_notify_done(indio_dev->trig);
>>> +
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> +static unsigned int stm32_dac_get_trig_tsel(struct stm32_dac *dac,
>>> + struct iio_trigger *trig)
>>> +{
>>> + unsigned int i;
>>> +
>>> + /* skip 1st trigger that should be swtrig */
>>> + for (i = 1; stm32h7_dac_trinfo[i].name; i++) {
>>> + /*
>>> + * Checking both stm32 timer trigger type and trig name
>>> + * should be safe against arbitrary trigger names.
>>> + */
>>> + if (is_stm32_timer_trigger(trig) &&
>>> + !strcmp(stm32h7_dac_trinfo[i].name, trig->name)) {
>>> + return stm32h7_dac_trinfo[i].tsel;
>>> + }
>>> + }
>>> +
>>> + /* When no trigger has been found, default to software trigger */
>>> + dac->swtrig = true;
>>> +
>>> + return stm32h7_dac_trinfo[0].tsel;
>>> +}
>>> +
>>> +static int stm32_dac_set_trig(struct stm32_dac *dac, struct iio_trigger *trig,
>>> + int channel)
>>> +{
>>> + struct iio_dev *indio_dev = iio_priv_to_dev(dac);
>>> + u32 shift = channel == STM32_DAC_CHANNEL_1 ? 0 : STM32_DAC_CHAN2_SHIFT;
>>> + u32 val = 0, tsel;
>>> + u32 msk = (STM32H7_DAC_CR_TEN1 | STM32H7_DAC_CR_TSEL1) << shift;
>>> +
>>> + dac->swtrig = false;
>>> + if (trig) {
>>> + /* select & enable trigger (tsel / ten) */
>>> + tsel = stm32_dac_get_trig_tsel(dac, trig);
>>> + val = tsel << STM32H7_DAC_CR_TSEL1_SHIFT;
>>> + val = (val | STM32H7_DAC_CR_TEN1) << shift;
>>> + }
>>> +
>>> + if (trig)
>>> + dev_dbg(&indio_dev->dev, "enable trigger: %s\n", trig->name);
>>> + else
>>> + dev_dbg(&indio_dev->dev, "disable trigger\n");
>>> +
>>> + return regmap_update_bits(dac->common->regmap, STM32_DAC_CR, msk, val);
>>> +}
>>> +
>>> static int stm32_dac_is_enabled(struct stm32_dac *dac, int channel)
>>> {
>>> u32 en, val;
>>> @@ -63,9 +164,16 @@ static int stm32_dac_enable(struct iio_dev *indio_dev, int channel)
>>> STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2;
>>> int ret;
>>>
>>> + ret = stm32_dac_set_trig(dac, indio_dev->trig, channel);
>>> + if (ret < 0) {
>>> + dev_err(&indio_dev->dev, "Trigger setup failed\n");
>>> + return ret;
>>> + }
>>> +
>>> ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, en);
>>> if (ret < 0) {
>>> dev_err(&indio_dev->dev, "Enable failed\n");
>>> + stm32_dac_set_trig(dac, NULL, channel);
>>> return ret;
>>> }
>>>
>>> @@ -88,10 +196,12 @@ static int stm32_dac_disable(struct iio_dev *indio_dev, int channel)
>>> int ret;
>>>
>>> ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, 0);
>>> - if (ret)
>>> + if (ret) {
>>> dev_err(&indio_dev->dev, "Disable failed\n");
>>> + return ret;
>>> + }
>>>
>>> - return ret;
>>> + return stm32_dac_set_trig(dac, NULL, channel);
>>> }
>>>
>>> static int stm32_dac_get_value(struct stm32_dac *dac, int channel, int *val)
>>> @@ -258,10 +368,17 @@ static int stm32_dac_probe(struct platform_device *pdev)
>>> if (ret < 0)
>>> return ret;
>>>
>>> - ret = iio_device_register(indio_dev);
>>> + ret = iio_triggered_event_setup(indio_dev, NULL,
>>> + stm32_dac_trigger_handler);
>>> if (ret)
>>> return ret;
>>>
>>> + ret = iio_device_register(indio_dev);
>>> + if (ret) {
>>> + iio_triggered_event_cleanup(indio_dev);
>>> + return ret;
>>> + }
>>> +
>>> return 0;
>>> }
>>>
>>> @@ -269,6 +386,7 @@ static int stm32_dac_remove(struct platform_device *pdev)
>>> {
>>> struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>>
>>> + iio_triggered_event_cleanup(indio_dev);
>>> iio_device_unregister(indio_dev);
>>>
>>> return 0;
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
