On Fri, 2017-04-28 at 08:52 -0500, Rob Herring wrote: > On Fri, Apr 21, 2017 at 04:58:23PM +0200, Mårten Lindahl wrote: > > From: Mårten Lindahl <martenli@xxxxxxxx> > > > > This adds support for the Texas Instruments ADC084S021 ADC chip. > > > > Signed-off-by: Mårten Lindahl <martenli@xxxxxxxx> > > --- > > .../devicetree/bindings/iio/adc/ti-adc084s021.txt | 25 ++ > > It's preferred to put bindings in a separate patch. I am sorry for that. I split this into its own patch in v2. > > > drivers/iio/adc/Kconfig | 12 + > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/ti-adc084s021.c | 342 +++++++++++++++++++++ > > 4 files changed, 380 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt > > create mode 100644 drivers/iio/adc/ti-adc084s021.c > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt > > new file mode 100644 > > index 0000000..921eb46 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt > > @@ -0,0 +1,25 @@ > > +* Texas Instruments' ADC084S021 > > + > > +Required properties: > > + - compatible : Must be "ti,adc084s021" > > + - reg : SPI chip select number for the device > > + - vref-supply : The regulator supply for ADC reference voltage > > + - spi-max-frequency : Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt > > + > > +Optional properties: > > + - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings > > + - spi-cpha : SPI shifted clock phase (CPHA), as per spi-bus bindings > > + - spi-cs-high : SPI chip select active high, as per spi-bus bindings > > How are these optional? A given device should have specific properties > required here. No, they are not optional. I removed this section in v2 and updated the required properties section. > > Also, no need to define them, "per spi-bus bindings" is enough. Fixed in v2. > > Rob Thanks, Mårten -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
