The Linear Technology LTC2631, LTC2633 and LTC2635 are very similar
to the AD5064 device, in particular the LTC2627.
This patch adds support for those devices. Only the LTC2633 has been
tested, which is the 2-channel variant. The LTC2631 is the 1-channel,
and the LTC2635 the 4-channel version. The actual DAC resolution depends
on the exact chip type and can be 12, 10 or 8 bits, using the upper bits
so this has no effect on the register map. The internal reference is set
to 2.5V on "L" versions, and it's 4.096V for "H" versions.
Datasheets:
LTC2631: http://www.linear.com/docs/26553
LTC2633: http://www.linear.com/docs/39529
LTC2635: http://www.linear.com/docs/28754
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
drivers/iio/dac/Kconfig | 3 ++-
drivers/iio/dac/ad5064.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 58 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index d3084028..31ffb67 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -13,7 +13,8 @@ config AD5064
AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R,
AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, AD5666,
AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616,
- LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to Analog Converter.
+ LTC2617, LTC2619, LTC2626, LTC2627, LTC2629, LTC2631, LTC2633, LTC2635
+ Digital to Analog Converter.
To compile this driver as a module, choose M here: the
module will be called ad5064.
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index 6803e4a..b440180 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -2,8 +2,8 @@
* AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R,
* AD5627, AD5627R, AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R,
* AD5666, AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616,
- * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to analog converters
- * driver
+ * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629, LTC2631, LTC2633, LTC2635
+ * Digital to analog converters driver
*
* Copyright 2011 Analog Devices Inc.
*
@@ -168,6 +168,12 @@ enum ad5064_type {
ID_LTC2626,
ID_LTC2627,
ID_LTC2629,
+ ID_LTC2631_L,
+ ID_LTC2631_H,
+ ID_LTC2633_L,
+ ID_LTC2633_H,
+ ID_LTC2635_L,
+ ID_LTC2635_H,
};
static int ad5064_write(struct ad5064_state *st, unsigned int cmd,
@@ -724,6 +730,48 @@ static int ad5064_write_raw(struct iio_dev *indio_dev,
.num_channels = 4,
.regmap_type = AD5064_REGMAP_LTC,
},
+ [ID_LTC2631_L] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ltc2627_channels,
+ .num_channels = 1,
+ .regmap_type = AD5064_REGMAP_LTC,
+ },
+ [ID_LTC2631_H] = {
+ .shared_vref = true,
+ .internal_vref = 4096000,
+ .channels = ltc2627_channels,
+ .num_channels = 1,
+ .regmap_type = AD5064_REGMAP_LTC,
+ },
+ [ID_LTC2633_L] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ltc2627_channels,
+ .num_channels = 2,
+ .regmap_type = AD5064_REGMAP_LTC,
+ },
+ [ID_LTC2633_H] = {
+ .shared_vref = true,
+ .internal_vref = 4096000,
+ .channels = ltc2627_channels,
+ .num_channels = 2,
+ .regmap_type = AD5064_REGMAP_LTC,
+ },
+ [ID_LTC2635_L] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ltc2627_channels,
+ .num_channels = 4,
+ .regmap_type = AD5064_REGMAP_LTC,
+ },
+ [ID_LTC2635_H] = {
+ .shared_vref = true,
+ .internal_vref = 4096000,
+ .channels = ltc2627_channels,
+ .num_channels = 4,
+ .regmap_type = AD5064_REGMAP_LTC,
+ },
};
static inline unsigned int ad5064_num_vref(struct ad5064_state *st)
@@ -982,6 +1030,12 @@ static int ad5064_i2c_remove(struct i2c_client *i2c)
{"ltc2626", ID_LTC2626},
{"ltc2627", ID_LTC2627},
{"ltc2629", ID_LTC2629},
+ {"ltc2631-l", ID_LTC2631_L},
+ {"ltc2631-h", ID_LTC2631_H},
+ {"ltc2633-l", ID_LTC2633_L},
+ {"ltc2633-h", ID_LTC2633_H},
+ {"ltc2635-l", ID_LTC2635_L},
+ {"ltc2635-h", ID_LTC2635_H},
{}
};
MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
