On 04/05/2017 12:04 AM, Heiko Stuebner wrote:
Am Montag, 27. März 2017, 17:40:48 CEST schrieb cl@xxxxxxxxxxxxxx:
From: Liang Chen <cl@xxxxxxxxxxxxxx>
This patch adds core dtsi file for Rockchip RK3328 SoCs.
Signed-off-by: Liang Chen <cl@xxxxxxxxxxxxxx>
applied for 4.12, with the following list of changes:
- reorder some properties to bring them in alphabetical order
- dropped the status-disabled from the power-controller
power-domain control is a quite essential part of the system, so if
boards really want to disable them, they should do it in their board file
Having power-domains on all the time, is also our default in all other
devicetrees.
- removed #dma-cells from spi0 -> this is not a dma controller
- reword the cru assigned-clocks comment a bit
- fixed sdmmc1_bus4 pins, as indicated by Shawn and after looking up the
correct pins in the manual
And a final question, are you sure about SCLK_PDM becoming a child of the
APLL in your cru assigned-clocks, as the APLL will vary later on with cpufreq
active?
the NPLL will vary later on with cpufreq active.
The NPLL is better than APLL, so NPLL is for clk_core,and apll is for pdm.
please see the TRM in CRU:
1.4 Function Description
/........./
To maximize the flexibility, some of clocks can select divider source
from 5 PLLs. (Note: It’s
recommended to use NEW PLL instead of ARM PLL as arm clock source,
because NEW PLL is
near to ARM. And it’s jitter is better than ARM PLL).
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
