On 04/09/2017 10:39 AM, Jonathan Cameron wrote: > On 06/04/17 17:11, Fabrice Gasnier wrote: >> Add support for STMicroelectronics STM32 DAC. It's a 12-bit, voltage >> output digital-to-analog converter. It has two output channels, each >> with its own converter. >> It supports 8 bits or 12bits left/right aligned data format. Only >> 12bits right-aligned is used here. It has built-in noise or >> triangle waveform generator, and supports external triggers for >> conversions. >> Each channel can be used independently, with separate trigger, then >> separate IIO devices are used to handle this. Core driver is intended >> to share common resources such as clock, reset, reference voltage and >> registers. >> >> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx> > A few little bits and pieces from the change to powerdown modes... > > I have also been thinking about whether we can take this prior to sorting > out the DDS side, but worry a little that we may end up wanting to change > the way we define the channels - so that might need sorting to some degree > before we can get the basics in place. Hi Jonathan, Just sent updated v3 with powerdown changes as per your comments. > > Jonathan >> --- >> Changes in v2: >> - Define 'Hi-Z'/'enable' powerdown modes instead of using 'enable' >> attribute normally not used for DACs. >> - use 'reg' instead of 'st,dac-channel' property >> - Use macro to differentiate channels >> - Fix typos, remove leading '&' for functions >> - Add comments on single channel per device >> - Use devm_iio_device_register variant, removes need for .remove >> --- >> drivers/iio/dac/Kconfig | 15 ++ >> drivers/iio/dac/Makefile | 2 + >> drivers/iio/dac/stm32-dac-core.c | 180 ++++++++++++++++++++ >> drivers/iio/dac/stm32-dac-core.h | 51 ++++++ >> drivers/iio/dac/stm32-dac.c | 350 +++++++++++++++++++++++++++++++++++++++ >> 5 files changed, 598 insertions(+) >> create mode 100644 drivers/iio/dac/stm32-dac-core.c >> create mode 100644 drivers/iio/dac/stm32-dac-core.h >> create mode 100644 drivers/iio/dac/stm32-dac.c >> >> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig >> index d3084028..7198648 100644 >> --- a/drivers/iio/dac/Kconfig >> +++ b/drivers/iio/dac/Kconfig >> @@ -274,6 +274,21 @@ config MCP4922 >> To compile this driver as a module, choose M here: the module >> will be called mcp4922. >> >> +config STM32_DAC >> + tristate "STMicroelectronics STM32 DAC" >> + depends on (ARCH_STM32 && OF) || COMPILE_TEST >> + depends on REGULATOR >> + select STM32_DAC_CORE >> + help >> + Say yes here to build support for STMicroelectronics STM32 Digital >> + to Analog Converter (DAC). >> + >> + This driver can also be built as a module. If so, the module >> + will be called stm32-dac. >> + >> +config STM32_DAC_CORE >> + tristate >> + >> config VF610_DAC >> tristate "Vybrid vf610 DAC driver" >> depends on OF >> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile >> index f01bf4a..afe8ae7 100644 >> --- a/drivers/iio/dac/Makefile >> +++ b/drivers/iio/dac/Makefile >> @@ -29,4 +29,6 @@ obj-$(CONFIG_MAX517) += max517.o >> obj-$(CONFIG_MAX5821) += max5821.o >> obj-$(CONFIG_MCP4725) += mcp4725.o >> obj-$(CONFIG_MCP4922) += mcp4922.o >> +obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o >> +obj-$(CONFIG_STM32_DAC) += stm32-dac.o >> obj-$(CONFIG_VF610_DAC) += vf610_dac.o >> diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c >> new file mode 100644 >> index 0000000..75e4878 >> --- /dev/null >> +++ b/drivers/iio/dac/stm32-dac-core.c >> @@ -0,0 +1,180 @@ >> +/* >> + * This file is part of STM32 DAC driver >> + * >> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved >> + * Author: Fabrice Gasnier <fabrice.gasnier@xxxxxx>. >> + * >> + * License type: GPLv2 >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY >> + * or FITNESS FOR A PARTICULAR PURPOSE. >> + * See the GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/delay.h> >> +#include <linux/module.h> >> +#include <linux/of_platform.h> >> +#include <linux/regulator/consumer.h> >> +#include <linux/reset.h> >> + >> +#include "stm32-dac-core.h" >> + >> +/** >> + * struct stm32_dac_priv - stm32 DAC core private data >> + * @pclk: peripheral clock common for all DACs >> + * @rst: peripheral reset control >> + * @vref: regulator reference >> + * @common: Common data for all DAC instances >> + */ >> +struct stm32_dac_priv { >> + struct clk *pclk; >> + struct reset_control *rst; >> + struct regulator *vref; >> + struct stm32_dac_common common; >> +}; >> + >> +static struct stm32_dac_priv *to_stm32_dac_priv(struct stm32_dac_common *com) >> +{ >> + return container_of(com, struct stm32_dac_priv, common); >> +} >> + >> +static const struct regmap_config stm32_dac_regmap_cfg = { >> + .reg_bits = 32, >> + .val_bits = 32, >> + .reg_stride = sizeof(u32), >> + .max_register = 0x3fc, >> +}; >> + >> +static int stm32_dac_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct stm32_dac_priv *priv; >> + struct regmap *regmap; >> + struct resource *res; >> + void __iomem *mmio; >> + int ret; >> + >> + if (!dev->of_node) >> + return -ENODEV; >> + >> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); >> + if (!priv) >> + return -ENOMEM; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + mmio = devm_ioremap_resource(dev, res); >> + if (IS_ERR(mmio)) >> + return PTR_ERR(mmio); >> + >> + regmap = devm_regmap_init_mmio(dev, mmio, &stm32_dac_regmap_cfg); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + priv->common.regmap = regmap; >> + >> + priv->vref = devm_regulator_get(dev, "vref"); >> + if (IS_ERR(priv->vref)) { >> + ret = PTR_ERR(priv->vref); >> + dev_err(dev, "vref get failed, %d\n", ret); >> + return ret; >> + } >> + >> + ret = regulator_enable(priv->vref); >> + if (ret < 0) { >> + dev_err(dev, "vref enable failed\n"); >> + return ret; >> + } >> + >> + ret = regulator_get_voltage(priv->vref); >> + if (ret < 0) { >> + dev_err(dev, "vref get voltage failed, %d\n", ret); >> + goto err_vref; >> + } >> + priv->common.vref_mv = ret / 1000; >> + dev_dbg(dev, "vref+=%dmV\n", priv->common.vref_mv); >> + >> + priv->pclk = devm_clk_get(dev, "pclk"); >> + if (IS_ERR(priv->pclk)) { >> + ret = PTR_ERR(priv->pclk); >> + dev_err(dev, "pclk get failed\n"); >> + goto err_vref; >> + } >> + >> + ret = clk_prepare_enable(priv->pclk); >> + if (ret < 0) { >> + dev_err(dev, "pclk enable failed\n"); >> + goto err_vref; >> + } >> + >> + priv->rst = devm_reset_control_get(dev, NULL); >> + if (!IS_ERR(priv->rst)) { >> + reset_control_assert(priv->rst); >> + udelay(2); >> + reset_control_deassert(priv->rst); >> + } >> + >> + /* When clock speed is higher than 80MHz, set HFSEL */ >> + priv->common.hfsel = (clk_get_rate(priv->pclk) > 80000000UL); >> + ret = regmap_update_bits(regmap, STM32_DAC_CR, STM32H7_DAC_CR_HFSEL, >> + priv->common.hfsel ? STM32H7_DAC_CR_HFSEL : 0); >> + if (ret) >> + goto err_pclk; >> + >> + platform_set_drvdata(pdev, &priv->common); >> + >> + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, dev); >> + if (ret < 0) { >> + dev_err(dev, "failed to populate DT children\n"); >> + goto err_pclk; >> + } >> + >> + return 0; >> + >> +err_pclk: >> + clk_disable_unprepare(priv->pclk); >> +err_vref: >> + regulator_disable(priv->vref); >> + >> + return ret; >> +} >> + >> +static int stm32_dac_remove(struct platform_device *pdev) >> +{ >> + struct stm32_dac_common *common = platform_get_drvdata(pdev); >> + struct stm32_dac_priv *priv = to_stm32_dac_priv(common); >> + >> + of_platform_depopulate(&pdev->dev); >> + clk_disable_unprepare(priv->pclk); >> + regulator_disable(priv->vref); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id stm32_dac_of_match[] = { >> + { .compatible = "st,stm32h7-dac-core", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, stm32_dac_of_match); >> + >> +static struct platform_driver stm32_dac_driver = { >> + .probe = stm32_dac_probe, >> + .remove = stm32_dac_remove, >> + .driver = { >> + .name = "stm32-dac-core", >> + .of_match_table = stm32_dac_of_match, >> + }, >> +}; >> +module_platform_driver(stm32_dac_driver); >> + >> +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@xxxxxx>"); >> +MODULE_DESCRIPTION("STMicroelectronics STM32 DAC core driver"); >> +MODULE_LICENSE("GPL v2"); >> +MODULE_ALIAS("platform:stm32-dac-core"); >> diff --git a/drivers/iio/dac/stm32-dac-core.h b/drivers/iio/dac/stm32-dac-core.h >> new file mode 100644 >> index 0000000..daf0993 >> --- /dev/null >> +++ b/drivers/iio/dac/stm32-dac-core.h >> @@ -0,0 +1,51 @@ >> +/* >> + * This file is part of STM32 DAC driver >> + * >> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved >> + * Author: Fabrice Gasnier <fabrice.gasnier@xxxxxx>. >> + * >> + * License type: GPLv2 >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY >> + * or FITNESS FOR A PARTICULAR PURPOSE. >> + * See the GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#ifndef __STM32_DAC_CORE_H >> +#define __STM32_DAC_CORE_H >> + >> +#include <linux/regmap.h> >> + >> +/* STM32 DAC registers */ >> +#define STM32_DAC_CR 0x00 >> +#define STM32_DAC_DHR12R1 0x08 >> +#define STM32_DAC_DHR12R2 0x14 >> +#define STM32_DAC_DOR1 0x2C >> +#define STM32_DAC_DOR2 0x30 >> + >> +/* STM32_DAC_CR bit fields */ >> +#define STM32_DAC_CR_EN1 BIT(0) >> +#define STM32H7_DAC_CR_HFSEL BIT(15) >> +#define STM32_DAC_CR_EN2 BIT(16) >> + >> +/** >> + * struct stm32_dac_common - stm32 DAC driver common data (for all instances) >> + * @regmap: DAC registers shared via regmap >> + * @vref_mv: reference voltage (mv) >> + * @hfsel: high speed bus clock selected >> + */ >> +struct stm32_dac_common { >> + struct regmap *regmap; >> + int vref_mv; >> + bool hfsel; >> +}; >> + >> +#endif >> diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c >> new file mode 100644 >> index 0000000..c0d993a >> --- /dev/null >> +++ b/drivers/iio/dac/stm32-dac.c >> @@ -0,0 +1,350 @@ >> +/* >> + * This file is part of STM32 DAC driver >> + * >> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved >> + * Authors: Amelie Delaunay <amelie.delaunay@xxxxxx> >> + * Fabrice Gasnier <fabrice.gasnier@xxxxxx> >> + * >> + * License type: GPLv2 >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY >> + * or FITNESS FOR A PARTICULAR PURPOSE. >> + * See the GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#include <linux/bitfield.h> >> +#include <linux/delay.h> >> +#include <linux/iio/iio.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/platform_device.h> >> + >> +#include "stm32-dac-core.h" >> + >> +#define STM32_DAC_CHANNEL_1 1 >> +#define STM32_DAC_CHANNEL_2 2 >> +#define STM32_DAC_IS_CHAN_1(ch) ((ch) & STM32_DAC_CHANNEL_1) >> + >> +/** >> + * struct stm32_dac - private data of DAC driver >> + * @common: reference to DAC common data >> + */ >> +struct stm32_dac { >> + struct stm32_dac_common *common; >> +}; >> + >> +static int stm32_dac_is_enabled(struct iio_dev *indio_dev, int channel) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + u32 en, val; >> + int ret; >> + >> + ret = regmap_read(dac->common->regmap, STM32_DAC_CR, &val); >> + if (ret < 0) >> + return ret; >> + if (STM32_DAC_IS_CHAN_1(channel)) >> + en = FIELD_GET(STM32_DAC_CR_EN1, val); >> + else >> + en = FIELD_GET(STM32_DAC_CR_EN2, val); >> + >> + return !!en; >> +} >> + >> +static int stm32_dac_enable(struct iio_dev *indio_dev, int channel) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + u32 en = STM32_DAC_IS_CHAN_1(channel) ? >> + STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2; >> + int ret; >> + >> + ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, en); >> + if (ret < 0) { >> + dev_err(&indio_dev->dev, "Enable failed\n"); >> + return ret; >> + } >> + >> + /* >> + * When HFSEL is set, it is not allowed to write the DHRx register >> + * during 8 clock cycles after the ENx bit is set. It is not allowed >> + * to make software/hardware trigger during this period either. >> + */ >> + if (dac->common->hfsel) >> + udelay(1); >> + >> + return 0; >> +} >> + >> +static int stm32_dac_disable(struct iio_dev *indio_dev, int channel) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + u32 en = STM32_DAC_IS_CHAN_1(channel) ? >> + STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2; >> + int ret; >> + >> + ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, 0); >> + if (ret) >> + dev_err(&indio_dev->dev, "Disable failed\n"); >> + >> + return ret; >> +} >> + >> +static int stm32_dac_get_value(struct stm32_dac *dac, int channel, int *val) >> +{ >> + int ret; >> + >> + if (STM32_DAC_IS_CHAN_1(channel)) >> + ret = regmap_read(dac->common->regmap, STM32_DAC_DOR1, val); >> + else >> + ret = regmap_read(dac->common->regmap, STM32_DAC_DOR2, val); >> + >> + return ret ? ret : IIO_VAL_INT; >> +} >> + >> +static int stm32_dac_set_value(struct stm32_dac *dac, int channel, int val) >> +{ >> + int ret; >> + >> + if (STM32_DAC_IS_CHAN_1(channel)) >> + ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R1, val); >> + else >> + ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R2, val); >> + >> + return ret; >> +} >> + >> +static int stm32_dac_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + return stm32_dac_get_value(dac, chan->channel, val); >> + case IIO_CHAN_INFO_SCALE: >> + *val = dac->common->vref_mv; >> + *val2 = chan->scan_type.realbits; >> + return IIO_VAL_FRACTIONAL_LOG2; >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int stm32_dac_write_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int val, int val2, long mask) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + return stm32_dac_set_value(dac, chan->channel, val); >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int stm32_dac_debugfs_reg_access(struct iio_dev *indio_dev, >> + unsigned reg, unsigned writeval, >> + unsigned *readval) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + >> + if (!readval) >> + return regmap_write(dac->common->regmap, reg, writeval); >> + else >> + return regmap_read(dac->common->regmap, reg, readval); >> +} >> + >> +static const struct iio_info stm32_dac_iio_info = { >> + .read_raw = stm32_dac_read_raw, >> + .write_raw = stm32_dac_write_raw, >> + .debugfs_reg_access = stm32_dac_debugfs_reg_access, >> + .driver_module = THIS_MODULE, >> +}; >> + >> +static const char * const stm32_dac_powerdown_modes[] = { >> + "Hi-Z", >> + "enable", > I wouldn't expect to see enable in here, that is handled by the power down > attribute. > > Hi-Z is the currently defined threestate I think? > > Documenation/ABI/testing/sysfs-bus-iio Yes, documentation states: "three_state: left floating". Thanks for pointing that out. > > Fine to propose additions to this but they need documenting in that general > file. >> +}; >> + >> +static int stm32_dac_get_powerdown_mode(struct iio_dev *indio_dev, >> + const struct iio_chan_spec *chan) >> +{ >> + return stm32_dac_is_enabled(indio_dev, chan->channel); >> +} >> + >> +static int stm32_dac_set_powerdown_mode(struct iio_dev *indio_dev, >> + const struct iio_chan_spec *chan, >> + unsigned int type) >> +{ >> + if (type) >> + return stm32_dac_enable(indio_dev, chan->channel); >> + else >> + return stm32_dac_disable(indio_dev, chan->channel); >> +} >> + >> +static ssize_t stm32_dac_read_powerdown(struct iio_dev *indio_dev, >> + uintptr_t private, >> + const struct iio_chan_spec *chan, >> + char *buf) >> +{ >> + int ret = stm32_dac_is_enabled(indio_dev, chan->channel); >> + >> + if (ret < 0) >> + return ret; >> + >> + return sprintf(buf, "%d\n", ret); >> +} >> + >> +static ssize_t stm32_dac_write_powerdown(struct iio_dev *indio_dev, >> + uintptr_t private, >> + const struct iio_chan_spec *chan, >> + const char *buf, size_t len) >> +{ >> + unsigned int en; >> + int ret; >> + >> + ret = kstrtouint(buf, 0, &en); > strtobool perhaps? Done in v3. I also reworked a little all around powerdown mode. Thanks, Fabrice >> + if (ret) >> + return ret; >> + >> + ret = stm32_dac_set_powerdown_mode(indio_dev, chan, en); >> + if (ret < 0) >> + return ret; >> + >> + return len; >> +} >> + >> +static const struct iio_enum stm32_dac_powerdown_mode_en = { >> + .items = stm32_dac_powerdown_modes, >> + .num_items = ARRAY_SIZE(stm32_dac_powerdown_modes), >> + .get = stm32_dac_get_powerdown_mode, >> + .set = stm32_dac_set_powerdown_mode, >> +}; >> + >> +static const struct iio_chan_spec_ext_info stm32_dac_ext_info[] = { >> + { >> + .name = "powerdown", >> + .read = stm32_dac_read_powerdown, >> + .write = stm32_dac_write_powerdown, >> + .shared = IIO_SEPARATE, >> + }, >> + IIO_ENUM("powerdown_mode", IIO_SEPARATE, &stm32_dac_powerdown_mode_en), >> + IIO_ENUM_AVAILABLE("powerdown_mode", &stm32_dac_powerdown_mode_en), >> + {}, >> +}; >> + >> +#define STM32_DAC_CHANNEL(chan, name) { \ >> + .type = IIO_VOLTAGE, \ >> + .indexed = 1, \ >> + .output = 1, \ >> + .channel = chan, \ >> + .info_mask_separate = \ >> + BIT(IIO_CHAN_INFO_RAW) | \ >> + BIT(IIO_CHAN_INFO_SCALE), \ >> + /* scan_index is always 0 as num_channels is 1 */ \ >> + .scan_type = { \ >> + .sign = 'u', \ >> + .realbits = 12, \ >> + .storagebits = 16, \ >> + }, \ >> + .datasheet_name = name, \ >> + .ext_info = stm32_dac_ext_info \ >> +} >> + >> +static const struct iio_chan_spec stm32_dac_channels[] = { >> + STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_1, "out1"), >> + STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_2, "out2"), >> +}; >> + >> +static int stm32_dac_chan_of_init(struct iio_dev *indio_dev) >> +{ >> + struct device_node *np = indio_dev->dev.of_node; >> + unsigned int i; >> + u32 channel; >> + int ret; >> + >> + ret = of_property_read_u32(np, "reg", &channel); >> + if (ret) { >> + dev_err(&indio_dev->dev, "Failed to read reg property\n"); >> + return ret; >> + } >> + >> + for (i = 0; i < ARRAY_SIZE(stm32_dac_channels); i++) { >> + if (stm32_dac_channels[i].channel == channel) >> + break; >> + } >> + if (i >= ARRAY_SIZE(stm32_dac_channels)) { >> + dev_err(&indio_dev->dev, "Invalid st,dac-channel\n"); >> + return -EINVAL; >> + } >> + >> + indio_dev->channels = &stm32_dac_channels[i]; >> + /* >> + * Expose only one channel here, as they can be used independently, >> + * with separate trigger. Then separate IIO devices are instantiated >> + * to manage this. >> + */ >> + indio_dev->num_channels = 1; >> + >> + return 0; >> +}; >> + >> +static int stm32_dac_probe(struct platform_device *pdev) >> +{ >> + struct device_node *np = pdev->dev.of_node; >> + struct iio_dev *indio_dev; >> + struct stm32_dac *dac; >> + int ret; >> + >> + if (!np) >> + return -ENODEV; >> + >> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*dac)); >> + if (!indio_dev) >> + return -ENOMEM; >> + platform_set_drvdata(pdev, indio_dev); >> + >> + dac = iio_priv(indio_dev); >> + dac->common = dev_get_drvdata(pdev->dev.parent); >> + indio_dev->name = dev_name(&pdev->dev); >> + indio_dev->dev.parent = &pdev->dev; >> + indio_dev->dev.of_node = pdev->dev.of_node; >> + indio_dev->info = &stm32_dac_iio_info; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + >> + ret = stm32_dac_chan_of_init(indio_dev); >> + if (ret < 0) >> + return ret; >> + >> + return devm_iio_device_register(&pdev->dev, indio_dev); >> +} >> + >> +static const struct of_device_id stm32_dac_of_match[] = { >> + { .compatible = "st,stm32-dac", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, stm32_dac_of_match); >> + >> +static struct platform_driver stm32_dac_driver = { >> + .probe = stm32_dac_probe, >> + .driver = { >> + .name = "stm32-dac", >> + .of_match_table = stm32_dac_of_match, >> + }, >> +}; >> +module_platform_driver(stm32_dac_driver); >> + >> +MODULE_ALIAS("platform:stm32-dac"); >> +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@xxxxxx>"); >> +MODULE_DESCRIPTION("STMicroelectronics STM32 DAC driver"); >> +MODULE_LICENSE("GPL v2"); >> > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
