The Allwinner SoCs all have an ADC that can also act as a touchscreen controller and a thermal sensor. The first four channels can be used either for the ADC or the touchscreen and the fifth channel is used for the thermal sensor. We currently have a driver for the two latter functions in drivers/input/touchscreen/sun4i-ts.c but we don't have access to the ADC feature at all. It is meant to replace the current driver by using MFD and subdrivers for existing bindings. The Allwinner A33 only has a thermal sensor present in the GPADC. In addition, there is not an existing DT binding for the GPADC. Thus, we do not need the sun4i-gpadc MFD driver which was made to keep DT compatibility and probe subdrivers without the need to add DT subnodes. This series of patch adds the thermal sensor for the A33 and GPU/CPU thermal throttling. It also adds the cpu-supply property to the CPU node needed by the Sinlinx SinA33 and Olinuxino A33 to adapt their CPU regulator voltage depending on the currently used OPP. The other A33 boards all have their cpu-supply property set. This series also fixes the missing operating-points-v2 property in cpu DT nodes. Finally, it also adds all remaining OPPs which can be found in Allwinner 3.4 linux and fex files of all A33 boards. This series of patch is based on this[1] series of patch. v4: - fixing patch name for DT bindings, v3: - fixed compatible name in DT and in documentation, - fixed DT node name and label, - added explanations in commit logs, - moved frequencies that need overvolting to board DTS instead of A33 DTSI, - fixed a typo in if is_enabled condition, - removed all patches concerning Olimex Olinuxino (no HW to test on), [1] https://lkml.org/lkml/2016/12/13/298 : "[PATCH v9] add support for Allwinner SoCs ADC" Thanks, Quentin Maxime Ripard (1): ARM: sun8i: a33: Add devfreq-based GPU cooling Quentin Schulz (7): dt-bindings: mfd: add A33 GPADC binding dt-bindings: input: touschcreen: remove sun4i documentation iio: adc: sun4i-gpadc-iio: move code used in MFD probing to new function iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor ARM: sun8i: a33: add thermal sensor ARM: sun8i: a33: add CPU thermal throttling ARM: sun8i: sina33: add highest OPP of CPUs .../touchscreen/sun4i.txt => mfd/sun4i-gpadc.txt} | 21 +++ arch/arm/boot/dts/sun8i-a23-a33.dtsi | 1 + arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 14 ++ arch/arm/boot/dts/sun8i-a33.dtsi | 81 ++++++++++ drivers/iio/adc/Kconfig | 2 +- drivers/iio/adc/sun4i-gpadc-iio.c | 170 +++++++++++++++++---- include/linux/mfd/sun4i-gpadc.h | 4 + 7 files changed, 260 insertions(+), 33 deletions(-) rename Documentation/devicetree/bindings/{input/touchscreen/sun4i.txt => mfd/sun4i-gpadc.txt} (64%) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html