Linux IDE
[Prev Page][Next Page]
- [PATCH 0/4] libata: Support SATA attached via SAS,
Brian King
- libata new EH issue - ATAPI device error not properly reported,
Albert Lee
- [PATCH 2/2] libata-dev: pata_pdc2027x - remove ATA_ENABLE_PATA ifdef,
Albert Lee
- [PATCH 1/2] libata-dev: pata_pdc2027x minor fix for new EH,
Albert Lee
- [PATCHSET] new Power Management for libata, take 3,
Tejun Heo
- [PATCH 3/8] libata: move ata_flush_cache() from libata-core.c to libata-eh.c,
Tejun Heo
- [PATCH 4/8] libata: reimplement controller-wide PM,
Tejun Heo
- [PATCH 1/8] libata: implement PM EH actions,
Tejun Heo
- [PATCH 2/8] libata: reimplement per-dev PM,
Tejun Heo
- [PATCH 8/8] sata_sil24: add suspend/sleep support,
Tejun Heo
- [PATCH 7/8] sata_sil24: separate out sil24_init_controller(),
Tejun Heo
- [PATCH 5/8] sata_sil: separate out sil_init_controller(),
Tejun Heo
- [PATCH 6/8] sata_sil: add suspend/sleep support,
Tejun Heo
- Re: [git-patches] new Power Management for libata, take 3,
Tejun Heo
- Re: [PATCHSET] new Power Management for libata, take 3,
Jeff Garzik
- Bug or HW? ata1: command timeout, stat 0x50 host_stat 0x4,
Jochen Heuer
- [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2,
Borislav Petkov
- [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(),
Borislav Petkov
- [PATCH 2/n] libata-core.c conversion to new debug scheme, part 2 of $N (50% done),
Borislav Petkov
- [DOC] SATA status report updated,
Jeff Garzik
- [git patches] libata update,
Jeff Garzik
- Improving sata_vsc PCI ID usage...,
Jeff Garzik
- [PATCH] ata_piix: add ICH6/7/8 to Kconfig,
Auke Kok
- PATCH: Set err_stops_fifo for newer Promise as well,
Alan Cox
- PATCH: Clean up pdc202xx_old so its more readable (done so I could work on libata ports),
Alan Cox
- PATCH: Housekeeping on IDE drivers,
Alan Cox
- PATCH: Fix error handling for drives which clear the FIFO on error,
Alan Cox
- PATCH: SC1200 debug printk,
Alan Cox
- PATCH: backport piix fixes from libata into the legacy driver,
Alan Cox
- PATCH: Clean up siimage,
Alan Cox
- PATCH: Old IDE, fix SATA detection for cabling,
Alan Cox
- [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static,
Adrian Bunk
- More information on ATI IXP failure in git9,
Andi Kleen
- -git9 breaks SATA on ATI-IXP,
Andi Kleen
- 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef),
Udo van den Heuvel
- regarding ata_msg_*(),
Tejun Heo
- [PATCH] libata: cosmetic updates,
Tejun Heo
- [ANNOUNCE] libata: new EH, NCQ, hotplug and Power Management patches against v2.6.17,
Tejun Heo
- Re: + via-pata-controller-xfer-fixes.patch added to -mm tree,
Jeff Garzik
- Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord,
Andrew Morton
- [sata_sil] kernel 2.6.17(-mm2) test - timeout issue,
Martin Ammermüller
- [PATCHSET] [PATCHSET] new Power Management for libata, take 2,
Tejun Heo
- [PATCH 03/15] libata: clear EH action on device detach,
Tejun Heo
- [PATCH 04/15] libata: move ata_do_simple_cmd() below ata_exec_internal(),
Tejun Heo
- [PATCH 01/15] libata: move ata_eh_clear_action() upward,
Tejun Heo
- [PATCH 02/15] libata: implement and use ata_deh_dev_action(),
Tejun Heo
- [PATCH 05/15] libata: update ata_do_simple_cmd(),
Tejun Heo
- [PATCH 07/15] libata: implement ata_port_max_devices(),
Tejun Heo
- [PATCH 08/15] libata: implement PM EH actions,
Tejun Heo
- [PATCH 06/15] libata: make two functions global,
Tejun Heo
- [PATCH 10/15] libata: move ata_flush_cache() from libata-core.c to libata-eh.c,
Tejun Heo
- [PATCH 09/15] libata: reimplement per-dev PM,
Tejun Heo
- [PATCH 13/15] sata_sil: add suspend/sleep support,
Tejun Heo
- [PATCH 14/15] sata_sil24: separate out sil24_init_controller(),
Tejun Heo
- [PATCH 12/15] sata_sil: separate out sil_init_controller(),
Tejun Heo
- [PATCH 15/15] sata_sil24: add suspend/sleep support,
Tejun Heo
- [PATCH 11/15] libata: reimplement controller-wide PM,
Tejun Heo
- Re: [git-patch] new Power Management for libata, take 2,
Tejun Heo
- Re: [PATCHSET] [PATCHSET] new Power Management for libata, take 2,
zhao, forrest
- [git patches] major libata update,
Jeff Garzik
- SATA150 TX4 very slow writing,
Bernardo Innocenti
- [PATCH 2/3] The definition of all SATA-ACPI-related functions.,
zhao, forrest
- [PATCH 0/3]ACPI support for SATA/PATA,
zhao, forrest
- [PATCH 3/3] Update users of ACPI-SATA/PATA functions,
zhao, forrest
- [PATCH 1/3] Makefile/Kconfig/doc/definition of noacpi,
zhao, forrest
- Re: [PATCH] Add MCP65 support for sata_nv driver,
Jeff Garzik
- Re: [PATCH] Add MCP65 support for ahci driver,
Jeff Garzik
- Parking hard disk head from drivers,
Michael Hanselmann
- sata_vsc problems with libata-dev.git#upstream,
Martin Hicks
- [PATCH 1/1] libata-dev: move the CDB-intr DMA blacklisting,
Albert Lee
- [-mm patch] make drivers/scsi/pata_pcmcia.c:pcmcia_remove_one() static,
Adrian Bunk
- [-mm patch] drivers/ide/legacy/ide-cs.c: make 2 functions static,
Adrian Bunk
- [PATCH -mm 2/6] cpu_relax(): ide_wait_stat(),
Andreas Mohr
- ATIIXP patch,
Velu Erwan
- Hotplug drives on vt8251 with ahci module,
Aalderd Bouwman
- [Ubuntu PATCH] add some NVIDIA chipset IDs,
Randy Dunlap
- [PATCH 1/1] libata: minor patch for ATA_DFLAG_PIO,
Albert Lee
- LibPATA/ATA Errors Continue - Will there be a fix for this?,
Justin Piszcz
- [PATCH] ide: disable dma for transcend CF,
Kirill Smelkov
- [PATCH] ide: fix revision comparison in ide_in_drive_list,
Kirill Smelkov
- [PATCH 2/2] libata: replace ap->hard_port_no with ap->port_no , take #2,
Unicorn Chang
- [PATCH 1/2] libata: make both legacy ports share one host_set , take #2,
Unicorn Chang
- [PATCH 0/2] libata: legacy mode fixes , take #2,
Unicorn Chang
- Status of SAS ability to attach SATA devices,
Ilia Sotnikov
- [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[],
Tejun Heo
- ICH7 fails to wakeup drive sata drive on ACPI resume,
Milosz Tanski
- 2.6.17-rc6-mm2 VIA PATA fails on some ATAPI drives,
matthieu castet
- PM works with SiI3124 + SiI3726,
kadowaki
- [patch] pdc202xx_old depends on CONFIG_BLK_DEV_IDEDMA,
Tobias Oed
- Sometimes ata_piix fails to detect second SATA disk,
Niccolo Rigacci
- BUG() with MV88SX6081 and other problems,
Tom Wirschell
- regarding conversion to new EH,
Tejun Heo
- [PATCH, RFC] pdc_adma: convert to new EH,
Tejun Heo
- [PATCH, RFC] sata_qstor: convert to new EH,
Tejun Heo
- [PATCHSET] sata_nv: convert to new EH and add hotplug support, take 2,
Tejun Heo
- 2.6.16.20 fails to boot on SATA system but works on IDE,
Barry Scott
- [PATCH 2.6.16-rc5 1/2] ahci: add another JMicron pci id,
justin
- Re: SATA: Marvell 88SE6141 support?,
Mark Lord
- [PATCHSET] sata_nv: convert to new EH and add hotplug support,
Tejun Heo
- [PATCH] libata: convert several bmdma-style controllers to new EH,
Tejun Heo
- [PATCH] sata_via: convert to new EH,
Tejun Heo
- [PATCH 1/n] libata-core.c conversion to new dbg scheme, v0.2 - part 1 (25% done),
Borislav Petkov
- [PATCH 2/n] libata.h redo dbg messages level order v0.2,
Borislav Petkov
- Fwd: 2.6.16-rc6-mm2,
Michal Piotrowski
- [PATCH 5/6] libata: Add support for SATA attachment to SAS adapters,
Brian King
- [PATCH 6/6] libata: Check per device max cdb length for SAS,
Brian King
- [PATCH 4/6] libata: Conditionally set host->max_cmd_len,
Brian King
- [PATCH 3/6] libata: Add ata_host_flags,
Brian King
- [PATCH 2/6] libata: Add ata_scsi_dev_disabled,
Brian King
- [PATCH 1/6] libata: Add host lock to struct ata_port,
Brian King
- kernel module sata_via,
Trilobit
- [PATCHSET] new Power Management for libata,
Tejun Heo
- [PATCH 01/10] libata: power down controller only on PMSG_SUSPEND,
Tejun Heo
- [PATCH 03/10] libata: move ata_do_simple_cmd() right below ata_exec_internal(),
Tejun Heo
- [PATCH 02/10] libata: kill per-device PM,
Tejun Heo
- [PATCH 09/10] sata_sil24: separate out sil24_init_controller(),
Tejun Heo
- [PATCH 10/10] sata_sil24: add suspend/sleep support,
Tejun Heo
- [PATCH 04/10] libata: update ata_do_simple_cmd(),
Tejun Heo
- [PATCH 06/10] libata: implement new Power Management framework,
Tejun Heo
- [PATCH 07/10] sata_sil: separate out sil_init_controller(),
Tejun Heo
- [PATCH 05/10] libata: implement new EH action ATA_EH_SPINUP,
Tejun Heo
- [PATCH 08/10] sata_sil: add suspend/sleep support,
Tejun Heo
- Re: [PATCHSET] new Power Management for libata,
Tejun Heo
- Re: [PATCHSET] new Power Management for libata,
zhao, forrest
- rolled up patch for new Power Management for libata,
Tejun Heo
- Re: [PATCHSET] new Power Management for libata,
Jeff Garzik
- [PATCH 1/2] libata: kill ATA_FLAG_SRST,
Tejun Heo
- [PATCH] libata: fix oops caused rescanning NULL sdev,
Tejun Heo
- AHCI suspend/resume patch can't work with latest #upstream,
zhao, forrest
- [git-patch] 6 misc patches just posted,
Tejun Heo
- [PATCH] sata_sil: add controller unplug detection in sil_interrupt(),
Tejun Heo
- [PATCH] sata_sil: update device hotplug handling,
Tejun Heo
- [PATCH] libata: add host_set->next for legacy two host sets case,
Tejun Heo
- [PATCH] libata: fast exit from EH while unloading,
Tejun Heo
- [PATCH] libata: fix ATA_EH_REVALIDATE clearing,
Tejun Heo
- [PATCH] libata: fix comment above ata_exec_internal(),
Tejun Heo
- Maybe a corrupted BIOS?,
zhao, forrest
- [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5),
zhao, forrest
- [PATCH v5] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command,
zhao, forrest
- DMADIR+AHCI slows boot a lot,
Jeff Garzik
- libata-tj-stable success report, with minor patch,
Jim Paris
- [ANN] libata "chilled" for 2.6.18,
Jeff Garzik
- [PATCH] libata: increase max-sectors to 256,
Jeff Garzik
- [git-patch] hotplug fix patches added,
Tejun Heo
- Re: [2.6.17-rc6-mm1] Oops during sata_promise init,
Jeff Garzik
- Power down DVD drive on Sony Vaio VGN-TX27GP,
Brad Campbell
- interlock switch,
Ming Zhang
- [RFC] ATA host-protected area (HPA) device mapper?,
Etienne Lorrain
- ICH8 docs available publicly,
Jeff Garzik
- Seagate SATA 3GB/s drive connected to via vt8251 using ahci module,
Aalderd Bouwman
[RFC] AHCI Command Completion Coalescing(CCC) proposal,
zhao, forrest
[PATCH 2/2] ipr: Support attaching SATA devices,
Brian King
2.6.17-rc6: libata WARN_ON() in ata_scsi_error,
Mark Lord
[PATCH 2.6.17-rc6] sata_mv: grab host lock inside eng_timeout,
Mark Lord
[PATCH 3/6] libata: Add ata_scsi_dev_disabled,
Brian King
[PATCH 1/2] ipr: Add some hardware defined types for SATA,
Brian King
[PATCH 0/2] ipr: Support SATA devices,
Brian King
[PATCH 4/6] libata: Add ata_host_flags,
Brian King
[PATCH 5/6] libata: Per device max command length checking,
Brian King
[PATCH 6/6] libata: Add support for SATA attachment to SAS adapters,
Brian King
[PATCH 2/6] libata: Add host lock to struct ata_port,
Brian King
[PATCH 1/6] libata: Setup nbytes in ata_sg_init_one,
Brian King
[PATCH 0/6] libata: Support SATA attached via SAS,
Brian King
hotplugging ide devices on a dock station,
Kristen Accardi
Re: 2.6.17-rc5-mm3: oops when ejecting dock,
Kristen Accardi
[PATCH] libata: add ata_port->private_flags,
Tejun Heo
[PATCH 0/6] AHCI suspend/resume support -- take 2,
zhao, forrest
[PATCH] sata_sil24: endian anotations,
Alexey Dobriyan
[PATCH] swsusp: allow drivers to determine between write-resume and actual wakeup,
Tejun Heo
[PATCH 2/n] libata-core.c conversion to new debugging scheme, part 2 (50% done),
Borislav Petkov
[PATCHSET] block: fix PIO cache coherency bug, take 2,
Tejun Heo
[2.6.17-rc5-mm2+ahci resume] NULL pointer dereference in cfq_dispatch_requests,
Jeremy Fitzhardinge
Re: Oops when creating software RAID device (2.6.16.14).,
Andrew Morton
[PATCH 2.6.16.16] sata_sil24: SII3124 sata driver endian problem,
Rune Torgersen
random reboot problem #2,
Janos Haar
[PATCH v4] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command,
zhao, forrest
[PATCH v3] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command,
zhao, forrest
random reboot problem.,
Janos Haar
[PATCH] Reduce the AHCI probe time,
zhao, forrest
[PATCH 1/6] The definition of ahci_start_engine() and ahci_stop_engine(),
zhao, forrest
[PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
- Re: [PATCH 6/6] Implement the AHCI suspend/resume,
Hannes Reinecke
- Re: [PATCH 6/6] Implement the AHCI suspend/resume,
Tejun Heo
- <Possible follow-ups>
- [PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
- [PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
- [PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
- [PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
- [PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
- [PATCH 6/6] Implement the AHCI suspend/resume,
zhao, forrest
[PATCH 5/6] Update the users of new added functions,
zhao, forrest
[PATCH 4/6] The definition of ahci_port_suspend(),
zhao, forrest
- Re: [PATCH 4/6] The definition of ahci_port_suspend(),
Hannes Reinecke
- <Possible follow-ups>
- [PATCH 4/6] The definition of ahci_port_suspend(),
zhao, forrest
- [PATCH 4/6] The definition of ahci_port_suspend(),
zhao, forrest
- [PATCH 4/6] The definition of ahci_port_suspend(),
zhao, forrest
- [PATCH 4/6] The definition of ahci_port_suspend(),
zhao, forrest
- [PATCH 4/6] The definition of ahci_port_suspend(),
zhao, forrest
[PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
zhao, forrest
- Re: [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
Hannes Reinecke
- Re: [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
Tejun Heo
- <Possible follow-ups>
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
zhao, forrest
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
zhao, forrest
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
zhao, forrest
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
zhao, forrest
- [PATCH 3/6] The definition of ahci_port_standby() and ahci_port_spinup(),
zhao, forrest
[PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
zhao, forrest
- Re: [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
Hannes Reinecke
- Re: [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
Jens Axboe
- Re: [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
Tejun Heo
- <Possible follow-ups>
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
zhao, forrest
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
zhao, forrest
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
zhao, forrest
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
zhao, forrest
- [PATCH 2/6] The definition of ahci_start_fis_rx() and ahci_stop_fis_rx(),
zhao, forrest
[PATCH 0/6] AHCI suspend/resume support,
zhao, forrest
Re: State of resume for AHCI?,
Jeremy Fitzhardinge
Controlling PATA access speeds,
John Treubig
Re: [PATCH] Re: ATIIXP and libata,
Velu Erwan
Re: [PATCH, review] IDE driver for MIPS Toshiba RBTX4939,
Sergei Shtylyov
[PATCHSET 03/03] add hotplug support, take 5,
Tejun Heo
- [PATCH 02/13] libata-hp: implement hotplug,
Tejun Heo
- [PATCH 04/13] libata-hp: implement warmplug,
Tejun Heo
- [PATCH 01/13] libata-hp: implement ata_eh_detach_dev(),
Tejun Heo
- [PATCH 03/13] libata-hp: implement SCSI part of hotplug,
Tejun Heo
- [PATCH 08/13] ata_piix: convert ata_piix to new probing mechanism,
Tejun Heo
- [PATCH 05/13] libata-hp: hook warmplug,
Tejun Heo
- [PATCH 07/13] libata-hp: update unload-unplug,
Tejun Heo
- [PATCH 12/13] libata-hp: killl ops->probe_reset,
Tejun Heo
- [PATCH 11/13] sata_sil24: convert to new probing mechanism and add hotplug support,
Tejun Heo
- [PATCH 10/13] ahci: convert to new probing mechanism and add hotplug support,
Tejun Heo
- [PATCH 06/13] libata-hp: implement bootplug,
Tejun Heo
- [PATCH 13/13] libata-hp: move ata_do_reset() to libata-eh.c,
Tejun Heo
- [PATCH 09/13] sata_sil: convert to new probing mechanism and add hotplug support,
Tejun Heo
[PATCHSET 02/03] prep LLDDs for hotplug support, take 4,
Tejun Heo
[PATCHSET 01/03] prep for hotplug support, take 5,
Tejun Heo
- [PATCH 04/12] libata-hp-prep: update ata_scsi_find_dev() and friends,
Tejun Heo
- [PATCH 03/12] libata-hp-prep: make some ata_device fields persistent,
Tejun Heo
- [PATCH 07/12] libata-hp-prep: store attached SCSI device,
Tejun Heo
- [PATCH 12/12] libata-hp-prep: implement followup softreset handling,
Tejun Heo
- [PATCH 02/12] libata-hp-prep: implement ata_dev_init(),
Tejun Heo
- [PATCH 01/12] libata-hp-prep: add flags and eh_info/context fields for hotplug,
Tejun Heo
- [PATCH 06/12] libata-hp-prep: implement ap->hw_sata_spd_limit,
Tejun Heo
- [PATCH 05/12] libata-hp-prep: use __ata_scsi_find_dev(),
Tejun Heo
- [PATCH 09/12] libata-hp-prep: make probing related functions global,
Tejun Heo
- [PATCH 11/12] libata-hp-prep: add prereset() method and implement ata_std_prereset(),
Tejun Heo
- [PATCH 10/12] libata-hp-prep: implement sata_phy_debounce(),
Tejun Heo
- [PATCH 08/12] libata-hp-prep: add ata_aux_wq,
Tejun Heo
- Re: [PATCHSET 01/03] prep for hotplug support, take 5,
Tejun Heo
- Re: [PATCHSET 01/03] prep for hotplug support, take 5,
Jeff Garzik
[git-patch] another round of hotplug patches,
Tejun Heo
[PATCH 01/02] libata: shift host flag constants,
Tejun Heo
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
