Implement bootplug - boot probing via hotplug path. While loading,
ata_host_add() simply schedules probing and invokes EH. After EH
completes, ata_host_add() scans and assicates them with SCSI devices.
EH path is slightly modified to handle this (e.g. no autopsy during
bootplug). The SCSI part is left in ata_host_add() because it's
shared with legacy path and to keep probing order as before (ATA scan
all ports in host_set then attach all).
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/scsi/libata-core.c | 49 +++++++++++++++++++++++++++++++-------------
drivers/scsi/libata-eh.c | 27 ++++++++++++++++--------
2 files changed, 52 insertions(+), 24 deletions(-)
3e706399b03bd237d087d731d4b1b029e546b33d
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index c61cfc7..a42877e 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5419,7 +5419,7 @@ static struct ata_port * ata_host_add(co
DPRINTK("ENTER\n");
- if (!ent->port_ops->probe_reset &&
+ if (!ent->port_ops->probe_reset && !ent->port_ops->error_handler &&
!(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
printk(KERN_ERR "ata%u: no reset mechanism available\n",
port_no);
@@ -5465,7 +5465,6 @@ err_out:
* RETURNS:
* Number of ports registered. Zero on error (no ports registered).
*/
-
int ata_device_add(const struct ata_probe_ent *ent)
{
unsigned int count = 0, i;
@@ -5542,19 +5541,6 @@ int ata_device_add(const struct ata_prob
}
ap->sata_spd_limit = ap->hw_sata_spd_limit;
- DPRINTK("ata%u: bus probe begin\n", ap->id);
- rc = ata_bus_probe(ap);
- DPRINTK("ata%u: bus probe end\n", ap->id);
-
- if (rc) {
- /* FIXME: do something useful here?
- * Current libata behavior will
- * tear down everything when
- * the module is removed
- * or the h/w is unplugged.
- */
- }
-
rc = scsi_add_host(ap->host, dev);
if (rc) {
ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n");
@@ -5564,6 +5550,39 @@ int ata_device_add(const struct ata_prob
* at the very least
*/
}
+
+ if (!ap->ops->probe_reset) {
+ unsigned long flags;
+
+ ata_port_probe(ap);
+
+ /* kick EH for boot probing */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+
+ ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1;
+ ap->eh_info.action |= ATA_EH_SOFTRESET;
+
+ ap->flags |= ATA_FLAG_LOADING;
+ ata_port_schedule_eh(ap);
+
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ /* wait for EH to finish */
+ ata_port_wait_eh(ap);
+ } else {
+ DPRINTK("ata%u: bus probe begin\n", ap->id);
+ rc = ata_bus_probe(ap);
+ DPRINTK("ata%u: bus probe end\n", ap->id);
+
+ if (rc) {
+ /* FIXME: do something useful here?
+ * Current libata behavior will
+ * tear down everything when
+ * the module is removed
+ * or the h/w is unplugged.
+ */
+ }
+ }
}
/* probes are done, now scan each port's disk(s) */
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index 733dfa5..70c132b 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -287,11 +287,14 @@ void ata_scsi_error(struct Scsi_Host *ho
/* clean up */
spin_lock_irqsave(hs_lock, flags);
- if (ap->flags & ATA_FLAG_SCSI_HOTPLUG)
- queue_work(ata_aux_wq, &ap->hotplug_task);
-
- if (ap->flags & ATA_FLAG_RECOVERED)
- ata_port_printk(ap, KERN_INFO, "EH complete\n");
+ if (ap->flags & ATA_FLAG_LOADING) {
+ ap->flags &= ~ATA_FLAG_LOADING;
+ } else {
+ if (ap->flags & ATA_FLAG_SCSI_HOTPLUG)
+ queue_work(ata_aux_wq, &ap->hotplug_task);
+ if (ap->flags & ATA_FLAG_RECOVERED)
+ ata_port_printk(ap, KERN_INFO, "EH complete\n");
+ }
ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED);
@@ -1367,6 +1370,7 @@ static int ata_eh_reset(struct ata_port
struct ata_eh_context *ehc = &ap->eh_context;
unsigned int *classes = ehc->classes;
int tries = ATA_EH_RESET_TRIES;
+ int verbose = !(ap->flags & ATA_FLAG_LOADING);
unsigned int action;
ata_reset_fn_t reset;
int i, did_followup_srst, rc;
@@ -1414,8 +1418,10 @@ static int ata_eh_reset(struct ata_port
}
retry:
- ata_port_printk(ap, KERN_INFO, "%s resetting port\n",
- reset == softreset ? "soft" : "hard");
+ /* shut up during boot probing */
+ if (verbose)
+ ata_port_printk(ap, KERN_INFO, "%s resetting port\n",
+ reset == softreset ? "soft" : "hard");
/* reset */
ata_eh_about_to_do(ap, ATA_EH_RESET_MASK);
@@ -1799,8 +1805,11 @@ void ata_do_eh(struct ata_port *ap, ata_
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset)
{
- ata_eh_autopsy(ap);
- ata_eh_report(ap);
+ if (!(ap->flags & ATA_FLAG_LOADING)) {
+ ata_eh_autopsy(ap);
+ ata_eh_report(ap);
+ }
+
ata_eh_recover(ap, prereset, softreset, hardreset, postreset);
ata_eh_finish(ap);
}
--
1.3.2
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
