Linux IDE
[Prev Page][Next Page]
- Re: [patch] ata: ahci: Enclosure Management via LED rev2, (continued)
- Sil4726 ahci driver initialization sequence,
Bjoern Olausson
- [PATCHSET] libata: improve ATAPI data transfer handling, take #2,
Tejun Heo
- [PATCH 01/14] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size,
Tejun Heo
- [PATCH 03/14] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*,
Tejun Heo
- [PATCH 06/14] libata: improve ATAPI draining,
Tejun Heo
- [PATCH 08/14] libata: kill non-sg DMA interface,
Tejun Heo
- [PATCH 02/14] cdrom: add more GPCMD_* constants,
Tejun Heo
- [PATCH 04/14] libata: add ATAPI_* cmd types and implement atapi_cmd_type(),
Tejun Heo
- [PATCH 13/14] libata: implement ATAPI per-command-type DMA horkages,
Tejun Heo
- [PATCH 14/14] libata: use PIO for misc ATAPI commands,
Tejun Heo
- [PATCH 07/14] libata: make atapi_request_sense() use sg,
Tejun Heo
- [PATCH 09/14] libata: change ATA_QCFLAG_DMAMAP semantics,
Tejun Heo
- [PATCH 05/14] libata: make ->data_xfer return the number of consumed bytes,
Tejun Heo
- [PATCH 12/14] libata: implement ATAPI drain buffer,
Tejun Heo
- [PATCH 11/14] libata: add qc->dma_nbytes,
Tejun Heo
- [PATCH 10/14] libata: convert to chained sg,
Tejun Heo
- Issuing a vendor specific ATA cmd on SATA Disk via ATA Pass Thru,
sam song
- [PATCH 1/1] Several fixes for the AVR32 PATA driver,
Kristoffer Nyborg Gregertsen
- [PATCH 8/8] ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it,
Bartlomiej Zolnierkiewicz
- [PATCH 7/8] ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c,
Bartlomiej Zolnierkiewicz
- [PATCH 6/8] ide: coding style fixes for drivers/ide/setup-pci.c,
Bartlomiej Zolnierkiewicz
- [PATCH 5/8] ide: fix ide_scan_pcibus() error message,
Bartlomiej Zolnierkiewicz
- [PATCH 3/8] ide: print banner message once per controller in m68k host drivers,
Bartlomiej Zolnierkiewicz
- [PATCH 4/8] ide: deprecate CONFIG_BLK_DEV_OFFBOARD,
Bartlomiej Zolnierkiewicz
- [PATCH 2/8] ide: add ide_set_irq() inline helper,
Bartlomiej Zolnierkiewicz
- [PATCH 1/8] ide: add missing checks for control register existence,
Bartlomiej Zolnierkiewicz
- [stable patch] backport of "be tolerant of 12-byte ATAPI commands in 16-byte CDBs",
Chuck Ebbert
- Re: 2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error,
Andrew Morton
- Re: sata_mv fixes: coding style preference?,
Mark Lord
- [PATCH] libata: report protocol and full CDB on error,
Tejun Heo
- Flexible SFF interrupt handling,
Jeff Garzik
- My name is Sumiko,
Maritza Gomez
- [PATCH 6/6] ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled,
Bartlomiej Zolnierkiewicz
- [PATCH 4/6] ide: use ide_init_port_hw() in setup-pci.c,
Bartlomiej Zolnierkiewicz
- [PATCH 5/6] rapide: remove write-only hwif->hwif_data,
Bartlomiej Zolnierkiewicz
- [PATCH 3/6] ide: always use ide_std_init_ports() in setup-pci.c,
Bartlomiej Zolnierkiewicz
- [PATCH 2/6] au1xxx-ide: use ide_init_port_hw(),
Bartlomiej Zolnierkiewicz
- [PATCH 1/6] au1xxx-ide: au_ide_probe() fixes,
Bartlomiej Zolnierkiewicz
- SATA Shutdown issue confuses (sda),
Dark Sylinc
- [PATCH] [libata] sata_mv: fix compilation error when enabling DEBUG,
Saeed Bishara
- [PATCH 0/3] OF-platform PATA driver,
Anton Vorontsov
- program to test various ATAPI transfer lengths (and brasero bugs),
Tejun Heo
- [PATCHSET] libata: improve ATAPI data transfer handling,
Tejun Heo
- [PATCH 01/13] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size,
Tejun Heo
- [PATCH 03/13] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*,
Tejun Heo
- [PATCH 04/13] libata: add ATAPI_* cmd types and implement atapi_cmd_type(),
Tejun Heo
- [PATCH 02/13] cdrom: add more GPCMD_* constants,
Tejun Heo
- [PATCH 06/13] libata: make atapi_request_sense() use sg,
Tejun Heo
- [PATCH 08/13] libata: change ATA_QCFLAG_DMAMAP semantics,
Tejun Heo
- [PATCH 10/13] libata: add qc->dma_nbytes,
Tejun Heo
- [PATCH 05/13] libata: improve ATAPI draining,
Tejun Heo
- [PATCH 07/13] libata: kill non-sg DMA interface,
Tejun Heo
- [PATCH 11/13] libata: implement ATAPI drain buffer,
Tejun Heo
- [PATCH 09/13] libata: convert to chained sg,
Tejun Heo
- [PATCH 13/13] libata: use PIO for misc ATAPI commands,
Tejun Heo
- [PATCH 12/13] libata: implement ATAPI per-command-type DMA horkages,
Tejun Heo
- [PATCHSET] libata: improve timing code and fix pata_amd transfer mode selection, take #2,
Tejun Heo
- [PATCH 01/12] ata_generic: unindent loop in generic_set_mode(),
Tejun Heo
- [PATCH 02/12] libata: export xfermode / PATA timing related functions,
Tejun Heo
- [PATCH 05/12] libata: xfer_mask is unsigned long not unsigned int,
Tejun Heo
- [PATCH 04/12] libata: kill ata_id_to_dma_mode(),
Tejun Heo
- [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes(),
Tejun Heo
- [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask(),
Tejun Heo
- [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi,
Tejun Heo
- [PATCH 12/12] pata_amd: update mode selection for NV PATAs,
Tejun Heo
- [PATCH 10/12] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask(),
Tejun Heo
- [PATCH 09/12] libata: implement ata_acpi_init_gtm(),
Tejun Heo
- [PATCH 11/12] libata: add ATA_CBL_PATA_IGN,
Tejun Heo
- [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff,
Tejun Heo
- [PATCHSET] libata: improve EH speed down logic, take #3,
Tejun Heo
- [PATCH] [libata] Set proper ATA UDMA mode for bf548 according to system clock.,
sonic zhang
- Re: [PATCH RFC] sata_promise: make pdc_atapi_pkt() use values from qc->tf,
Mikael Pettersson
- [PATCH #upstream-fixes] libata: bump transfer chunk size if it's odd,
Tejun Heo
- [PATCH RFC] sata_promise: make pdc_atapi_pkt() use values from qc->tf,
Tejun Heo
- [PATCH] [libata] Return proper ATA INT status in pata_bf54x driver.,
sonic zhang
- [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>,
Denis Cheng
- Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>,
Andrew Morton
[PATCH] sata_nv: don't use legacy DMA in ADMA mode (v3),
Robert Hancock
spurious completions during NCQ on rt kernel,
jozwicki
[PATCH] ata_piix: separate controller IDs into separate enum,
Tejun Heo
[RFC][PATCH 0/3] OF-platform PATA driver,
Anton Vorontsov
Re: 2.6.24-rc2 displays incorrect DVD description,
Andrew Morton
[PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3),
Robert Hancock
[PATCH] sata_nv: don't use legacy DMA in ADMA mode (v2),
Robert Hancock
[PATCH] piix: add HP compaq laptop to short cable list,
Bartlomiej Zolnierkiewicz
[PATCH] ali14xx: constify __initdata,
Bartlomiej Zolnierkiewicz
[PATCH] ide: remove bogus ide_fix_driveid() comment,
Bartlomiej Zolnierkiewicz
[PATCH] trm290: remove bogus init_hwif_trm290() comment,
Bartlomiej Zolnierkiewicz
[PATCH] alim15x3: add Mitac 8317 and derivatives to ali_cable_override(),
Bartlomiej Zolnierkiewicz
[PATCH] ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist,
Bartlomiej Zolnierkiewicz
"buggy cmd640" message followed by soft lockup,
Frans Pop
Message not available
Message not available
[PATCH #upstream-fixes] sata_sil24: fix sg table sizing,
Tejun Heo
Re: 2.6.24-rc3-mm1: I/O error, system hangs,
Andrew Morton
SATA PMP support in 2.6.24-rc3?,
Gaston, Jason D
[PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2),
Robert Hancock
sata_sil issue on 2.6.22,
Mark Paulus
SATA port multiplier Identify/Fail LEDs: driver support,
Jeremy Jackson
Possibly SATA related freeze killed networking and RAID,
noah
[PATCH] libata: blacklist TOSHIBA MK1637GSX,
Konstantin A. Lepikhov
2.6.23.1 SATA disk not properly spun down,
Filippo Zangheri
[PATCH 17/59] drivers/ide: Add missing "space",
Joe Perches
Re: [Bugme-new] [Bug 9410] New: TOSHIBA MK1637GSX do spurious command completion,
Andrew Morton
[PATCH] ata.h: Don't do a SATA check for 40wire_relaxed,
Alan Cox
[PATCH] pata_ninja32: Cardbus ATA initial support,
Alan Cox
[PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards,
Alan Cox
[PATCH] pata_hpt37x: Fix cable detect bug spotted by Sergei,
Alan Cox
[PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA,
Alan Cox
[PATCH] pata_ali: Add Mitac 8317 and derivatives,
Alan Cox
[PATCH] libata-sff: tf_load,
Alan Cox
[PATCH] libata: IORDY handling,
Alan Cox
[PATCH] libata-core: List more documentation sources for reference,
Alan Cox
[PATCH] ahci: Invalid use of writel/readl with iomap,
Alan Cox
[PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM,
Ben Dooks
[PATCH] pata_platfrom: add MACH_HAS_PATA_PLATFORM configuration,
Ben Dooks
[PATCH] pata_jmicron: fix disabled port handling in jmicron_pre_reset(),
Tejun Heo
[PATCH #upstream] ahci: update PCS programming,
Tejun Heo
[PATCH] ata_piix: reorganize controller IDs,
Tejun Heo
[PATCH 21/21] ide: make remaining built-in only IDE host drivers modular,
Bartlomiej Zolnierkiewicz
[PATCH 20/21] ide: fix host drivers depending on ide_generic to probe for interfaces,
Bartlomiej Zolnierkiewicz
[PATCH 19/21] cmd640: fix dependency on IDE_GENERIC,
Bartlomiej Zolnierkiewicz
[PATCH 18/21] ide: move ide_arm_init() call from init_ide_data() to ide_init(),
Bartlomiej Zolnierkiewicz
[PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw(),
Bartlomiej Zolnierkiewicz
[PATCH 16/21] ide: add ide_init_port_hw() helper,
Bartlomiej Zolnierkiewicz
[PATCH 15/21] sgiioc4: always init hwif->io_ports,
Bartlomiej Zolnierkiewicz
[PATCH 14/21] ide: remove ideprobe_init(),
Bartlomiej Zolnierkiewicz
[PATCH 13/21] ide: add hwif->chipset fixup to ide_device_add(),
Bartlomiej Zolnierkiewicz
[PATCH 11/21] rapide: set hwif->chipset,
Bartlomiej Zolnierkiewicz
[PATCH 10/21] ide: fix probing for hosts with serialized or IRQ sharing interfaces,
Bartlomiej Zolnierkiewicz
[PATCH 9/21] ide: kill probe_hwif_init(),
Bartlomiej Zolnierkiewicz
[PATCH 8/21] ide: don't try to unregister interfaces if 'initializing' in ide_register_hw(),
Bartlomiej Zolnierkiewicz
[PATCH 7/21] ide-cris: don't override ide_register_hw() result,
Bartlomiej Zolnierkiewicz
[PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig,
Bartlomiej Zolnierkiewicz
[PATCH 5/21] ide: add CONFIG_IDE_H8300 config option,
Bartlomiej Zolnierkiewicz
[PATCH 4/21] ide/Kconfig: fix mpc8xx host driver dependencies,
Bartlomiej Zolnierkiewicz
[PATCH 3/21] macide/q40ide: add missing __init tag to {macide,q40ide}_init(),
Bartlomiej Zolnierkiewicz
[PATCH 2/21] ide: merge ->fixup and ->quirkproc methods,
Bartlomiej Zolnierkiewicz
[PATCH 1/21] ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined),
Bartlomiej Zolnierkiewicz
Problem with PCMCIA IDE,
Akkana Peck
Re: laptop reboots right after hibernation,
Tomas Carnecky
Lost interrupt with cmd 64x,
Tobias Oed
[PATCH 2.6.24-rc3] aec62xx: Fix kernel oops in driver's probe function,
Aleksandar Radovanovic
Process Scheduling Issue using sg/libata,
Fajun Chen
[PATCH] pata_sil680: kill bogus reset code (take 2),
Sergei Shtylyov
[PATCH] pata_sil680: kill bogus reset code,
Sergei Shtylyov
[PATCH] siimage: remove resetproc() method,
Sergei Shtylyov
[PATCH] ide: don't set PIO mode on pre-EIDE drives,
Sergei Shtylyov
Re: [Bugme-new] [Bug 9393] New: SError: { DevExch } occuring and causing disruption,
Andrew Morton
sata_nv on MCP51: NCQ possible?,
Michael Tokarev
Re: [PATCH] drivers/ide/ide-probe.c, kernel 2.6.23.1,
Jonas Stare
[patch 38/40] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA, part 2,
Greg Kroah-Hartman
[patch 37/40] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA,
Greg Kroah-Hartman
[patch 14/40] libata: sync NCQ blacklist with upstream,
Greg Kroah-Hartman
sata_mv PCI ERROR; PCI IRQ reason=0x00000000 highpoint rocketraid 2300 pci-e,
Hein-Pieter van Braam
[PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs,
Mark Lord
sata_mv: hard resetting port,
Tomasz Chmielewski
stable basic 4-port SATA card,
Jeff Breidenbach
[PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3),
Robert Hancock
[PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode,
Robert Hancock
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]