Tejun, #modprobe ahci: Jun 12 13:13:25 server ahci 0000:00:0f.0: version 1.3 Jun 12 13:13:25 server ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Jun 12 13:13:32 server ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode Jun 12 13:13:32 server ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part Jun 12 13:13:32 server ata17: SATA max UDMA/133 cmd 0xE048AD00 ctl 0x0 bmdma 0x0 irq 10 Jun 12 13:13:32 server ata18: SATA max UDMA/133 cmd 0xE048AD80 ctl 0x0 bmdma 0x0 irq 10 Jun 12 13:13:32 server ata19: SATA max UDMA/133 cmd 0xE048AE00 ctl 0x0 bmdma 0x0 irq 10 Jun 12 13:13:32 server ata20: SATA max UDMA/133 cmd 0xE048AE80 ctl 0x0 bmdma 0x0 irq 10 Jun 12 13:13:33 server ata17: SATA link down (SStatus 0 SControl 300) Jun 12 13:13:33 server scsi16 : ahci Jun 12 13:13:33 server ata18: SATA link down (SStatus 0 SControl 300) Jun 12 13:13:33 server scsi17 : ahci Jun 12 13:13:33 server ata19: SATA link down (SStatus 0 SControl 300) Jun 12 13:13:33 server scsi18 : ahci Jun 12 13:13:33 server ata20: SATA link down (SStatus 0 SControl 300) Jun 12 13:13:33 server scsi19 : ahci Turning on sata-drive: Jun 12 13:13:38 server ata18: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen Jun 12 13:13:38 server ata18: (irq_stat 0x00000040, connection status changed) Jun 12 13:13:38 server ata18: soft resetting port Jun 12 13:13:38 server ata18: SATA link down (SStatus 1 SControl 300) Jun 12 13:13:38 server ata18: EH complete Jun 12 13:13:38 server ata18: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen Jun 12 13:13:38 server ata18: (irq_stat 0x00000040, connection status changed) Jun 12 13:13:38 server ata18: soft resetting port Jun 12 13:13:38 server ata18: SATA link down (SStatus 1 SControl 300) Jun 12 13:13:38 server ata18: EH complete Turing off sata-drive: no messages Turning on sata-drive: Jun 12 13:13:58 server ata18: exception Emask 0x10 SAct 0x0 SErr 0x4070000 action 0x2 frozen Jun 12 13:13:58 server ata18: (irq_stat 0x04400040, connection status changed) Jun 12 13:13:58 server ata18: soft resetting port Jun 12 13:13:58 server ata18: SATA link down (SStatus 1 SControl 300) Jun 12 13:13:58 server ata18: EH complete Turning off sata-drive: no messages Turning on sata-drive: Jun 12 13:14:13 server ata18: exception Emask 0x10 SAct 0x0 SErr 0x40f0000 action 0x2 frozen Jun 12 13:14:13 server ata18: (irq_stat 0x04400040, connection status changed) Jun 12 13:14:13 server ata18: soft resetting port Jun 12 13:14:13 server ata18: SATA link down (SStatus 1 SControl 300) Jun 12 13:14:13 server ata18: EH complete Turning off sata-drive: no messages #rmmod ahci: Jun 12 13:14:23 server ACPI: PCI interrupt for device 0000:00:0f.0 disabled Loading the ahci-driver while the drive is turned on, the drive is working properly. I have copied a lot of data to/from this drive and compared this data to the orginal with diff. Aalderd Bouwman. On Mon, 2006-06-12 at 19:51 +0900, Tejun Heo wrote: > Aalderd Bouwman wrote: > > Jun 12 12:27:24 server ata13.00: (irq_stat 0x40000000) > > Jun 12 12:27:24 server ata13.00: tag 0 cmd 0x60 Emask 0x1 stat 0x41 err 0x4 (device error) > > Jun 12 12:27:24 server ata13.00: tag 1 cmd 0x60 Emask 0x1 stat 0x41 err 0x4 (device error) > > Jun 12 12:27:24 server ata13.00: tag 3 cmd 0x60 Emask 0x1 stat 0x41 err 0x4 (device error) > > Jun 12 12:27:24 server ata13: soft resetting port > > Jun 12 12:27:24 server ata13: softreset failed (1st FIS failed) > > Jun 12 12:27:24 server ata13: softreset failed, retrying in 5 secs > > Jun 12 12:27:29 server ata13: hard resetting port > > > > Remove sata-connector and then the power-connector of the Seagate drive. > > (Note that I also have problems with hotplug the Maxtor-drive. > > I will post that problem later this day.) > > Can you remove and then replug those? I wanna see whether the > controller is locked up or the drive. > - : send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
