Re: Seagate SATA 3GB/s drive connected to via vt8251 using ahci module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Aalderd Bouwman wrote:
Jun 12 12:27:24 server ata13.00: (irq_stat 0x40000000)
Jun 12 12:27:24 server ata13.00: tag 0 cmd 0x60 Emask 0x1 stat 0x41 err 0x4 (device error)
Jun 12 12:27:24 server ata13.00: tag 1 cmd 0x60 Emask 0x1 stat 0x41 err 0x4 (device error)
Jun 12 12:27:24 server ata13.00: tag 3 cmd 0x60 Emask 0x1 stat 0x41 err 0x4 (device error)
Jun 12 12:27:24 server ata13: soft resetting port
Jun 12 12:27:24 server ata13: softreset failed (1st FIS failed)
Jun 12 12:27:24 server ata13: softreset failed, retrying in 5 secs
Jun 12 12:27:29 server ata13: hard resetting port

Remove sata-connector and then the power-connector of the Seagate drive.
(Note that I also have problems with hotplug the Maxtor-drive.
 I will post that problem later this day.)

Can you remove and then replug those? I wanna see whether the controller is locked up or the drive.

--
tejun
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux